Serta SHELBY User manual

Converting to Sofa or Lounger
Standing at the side of the unit (from bed position), lift backrest to the desired position and secure in
place by releasing to the sound of a click.
IMPORTANT: During conversion, ensure lifting is done from the back of backrest.
OPERATING THE SHELBY
Rev.141126
Converting to Bed
From sofa or lounge position, lift backrest all the way upwards until the last click is heard which unlocks
the mechanism and carefully return to a flat position.
Converting to Chaise
Ensure unit is in bed position. Facing sofa, lift right side of sofa seat (and backrest) to the desired chaise
position.
4 of 4
TOLL FREE 1-866-626-7826 LIFESTYLE SOLUTIONS
SHELBY

CAUTION: At least two adults are required to safely complete performing this task.
Other lifting attempts may risk back injury due to large and heavy part(s).
ASSEMBLING THE SHELBYBEFORE YOU BEGIN
Avoid using sharp objects such as a knife to cut open packing as you may accidentally damage the upholstery.
PARTS AND HARDWARE
3 of 42 of 4
1. Carefully place sofa body on a clean flat surface with the bottom side facing up.
2. Slot each leg into the ends of all four corners as shown below.
3. Secure each leg with two bolts fastened using rivet nut with the provided Allen keys.
4. Finally, lift and turn assembled unit onto its legs. A flat configuration of the sofa
indicates that it is in bed position (refer Operating The Shelby on page 4).
M4 Allen Key
2 x
1/4” X 3/4” Bolt
8x
Sofa body
1x
Rivet Nut
8x
Leg