General Instructions
1. Remove Wake Up Light and Alarm Clock from packing placing body 
base (A) at on a steady surface.
2. Connect the AC Adapter input (B) into connector (C) located on the 
rear of product.
3. Plug the AC adapter (D) into a standard household 120 V AC outlet. 
Note: Only use with the supplied AC adapter to avoid damage or re.
4. Recommended use is 16 inches (40.6 cm) to 20 inches (50.8cm) from 
your head, for example on a bedside table.
5. If you share a bedroom with someone else, this person may 
unintentionally wake up from the light of the appliance, even though 
this person is further removed from the appliance.This is the result of 
differences in light sensitivity between people.
6. The power consumption of the appliance is lowest if the radio and the 
lamp are turned off.
7. Clean the appliance with a dry or damp soft cloth.
8. Do not use abrasive cleaning agents, pads or cleaning solvents like 
alcohol, acetone, etc.,as this may damage the surface of the appliance.
9. To fully operate appliance see additional instructions.
Note: For additional stability, user may feel it helpful to hold the unit 
with one hand as they operate the unit with the other.
B
C
AD