OU Lighting CREE LEDs EHL6S11K User manual

www.oulighting.com
Copyright © 2014. All rights reserved. R201406-V12
Premium 144-watt LED Spotlight with
Wall Mount Bracket
Model: EHL6S11K
Features:
•50,000 hours of maintenance-free operation to L70 at 15°C
•Non-dimmable
•Die-cast aluminum housing and lens frame
•Dark bronze polyester powder-coat finish
•Tempered glass lens, thermal shock and impact resistant
•2" Adjustable slip fitter included (for 2-3/8" O.D. Pipe)
•Precise optical reflector
•Heat dissipating fins
•High-powered LED arrays
•Suitable for ground mounting, uplighting & downlighting
The wall mount bracket with 2-3/8" tenon attaches an OU Lighting’s floodlight to almost any surface: wall,
roof, wood pole, or the ground. Provides wiring access and a built-in 2-3/8" O.D. tenon to mount a fixture
with our adjustable slip fitter (E-ACS not included). Suggested 3/8" diameter bolts for mounting. Mounting
holes are spaced 3-1/4" apart.
CAUTIONS
Package Contents:
•One (1) EHL6S11K LED Spotlight
•One (1) EACWM2 Wall Mount Bracket
•One (1) User Manual
Applications:
Building facades, displays, uplighting and signs. Also effective as security lighting for storage areas and commercial sites.
Typical Mounting Height: 12 to 25 feet
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. Turn off power supply to avoid the risk of electrical shock.
2. This product must be wired in accordance with the National Electrical Code and applicable local codes and ordinances. Proper grounding is
required to ensure personal safety. A qualified electrician should do all work.
3. Suitable for mounting within 4 feet of the ground.
4. For supply wire temperature rating, refer to fixture label.
Outdoor
•RoHS compliant
•UL Listed for wet locations
•Cree® LEDs inside
•3-year warranty
•
Universal voltage (120V ~ 277V)

www.oulighting.com
Copyright © 2014. All rights reserved. R201406-V12
Installation Instructions:
1. Remove splice compartment cover from fitter.
2. Route supply leads through fitter and into splice compartment.
3. Slip lower fitter over pipe or tenon and securely tighten both set screws with 5/32 allen wrench to 140 in. lbs.
4. Complete the wiring to the power source and ground (refer to Fixture Wiring) inside splice compartment.
5. TO AIM FIXTURE: With splice compartment cover removed, loosen fitter bolt.
6. Adjust fixture to desired angle.
7. Retighten fitter bolt ensuring that the upper and lower fitters are engaged. Tighten fitter bolt to 230 in. lbs. with a torque
wrench.
8. Replace splice compartment cover.
Fixture Wiring:
1. Using customer supplied 90°C minimum rated wire connectors, make the following electrical connections:
a. Connect the black fixture lead to the voltagesupply lead
b. Connec t the white fixture lead to the neutral supply lead
c. Connect the green or green/yellow ground lead to the supply ground lead.
Model
EHL6S11K
Input Voltage
Universal 120V ~ 277V
Delivered Lumen Output
11,500 Lumens
Beam Angle / Photometric Distribution
20° Spot
CCT
5000K
Color Rendition
70 CRI
Lifetime (L70 at 15°C)
50,000 Hours
Housing Material
Die-cast aluminum housing and lens frame
Finish
Dark-bronze polyester powder-coat finish
Minimum Starting Temperature
-40°F
Dimensions
17" H x 15-7/8" W x 6-3/4" D (Height dimension includes fitter)
Weight
19.5 lbs
Comparable To
400W MH
*Specifications and appearance are subject to change without notice.
MADE IN CHINA