Out & Out HOMMY 06-W User manual

ASSEMBLY INSTRUCTIONS
HOMMY 06-W
HOMMY 06-B
1

2

Summary
Introduction
Introduction
Before Starting
Avoid accidents
Cleaning
Identifying parts
Hardware included in box
Furniture assembly
3
3
4
4
6
7
8
Weight Capacity
8
Dimensions and tools 5
Read this manual and follow the steps in order to keep the guarantee and also for the
perfect fit.
V : 11/19
We request you to carefully observe the assembly instructions as: fixing the product on
the wall, adding glue in needed and specifics places, product weight limit, etc.
Do not climb or lean on the furniture.
Avoid accidents
33

Before starting
USE ALCOHOL ONLY TO REMOVE PART NUMBERS AFTER ASSEMBLY
Cleaning
Slight dampened cloth and after a dry cloth, do not use chemicals or abrasives.
Use the cardboard of the packaging to
separate and support the parts removed
from the boxes.
4
Cover the assembly area with a blanket or
carpet to avoid damaging the parts during
the assembly process.
Prepare the room before starting the assembly, leaving it completely clean and the
area in good condition to start the work.

Dimensiones and tools
You may need help to assembly easier.
To improve assembly, use an eletronic screwdriver.
5
665 mm
26.18 in
366 mm
14.40 in
1352mm
53.22 in

Identifying parts
DESCRIPTION QTY PART
6
BASE
TOP
LEFT SIDE
RIGHT SIDE
1
1
1
1
LEFT PARTITION
RIGHT PARTITION
LEFT SHELF
CENTRAL SHELF
1
1
1
1
RIGHT SHELF
LOWER DOOR 1
1
002
003
004
001
006
007
008
005
010
009
LONGER DOOR
BACK A 1
1
012
011
BACK B
1
013
BACK C 1
014
FEET 2
015
01
02
03 04
05 06
07 08 09
10
11
12 13
14
15

LIFT SUPPORT KIT x 1
EF 000381 x 4
Hardware included in box
Weight Capacity
A 17KG - 37.47LB
3KG - 6.61LB
B
C
8KG - 17.63LB
C
C
C
CB
B
A
EF 000044 X 4
EF 000024 X 4
STICKER x 24
CHALK x 01
HANDLE x 2
7
EF 000033 x 20
EF 000132 x 8
EF 000106 x 25
EF 000094 X 12EF 000216 X 20
EF 000067 X 4 EF 000731
x 4

Fix hardware EF 000094 in pieces 02, 03 and 04.
STEP 1
8
EF 000094
02
03
04
Attach hardware EF 000024 to pieces 01 and 03 using
STEP 2
01
03
Insert hardware EF 000033 into pieces 03, 04, 05,
STEP 3
03
04
05
06
07
09
EF 000024
06, 07 and 09.
hardware EF 000106.

EF 000731
EF 000067
EF 000216
EF 000731
EF 000067
EF 000216
EF 000044
09
08
06
Insert hardwares EF 000067 and EF 000731 to connect pieces 06
and 09 to the part assembled in the previous step. Insert hardware
EF 000216 and turn to tighten.
Attach hardware EF 000044 on pieces 10 and 11 using hardware
EF 000106. Attach the handle using hardware EF 000381.
EF 000381
Handle
STEP 4
9
11
10
STEP 5
STEP 6
Insert hardwares EF 000067 and EF 000731 to connect pieces 05,
07 and 08. Insert hardware EF 000216 and turn to tighten.
05
07
08
05

05
05
Fix pieces 15 to piece 01 using hardware EF 000745 and EF 000741.
02
01
15
STEP 7
10
STEP 8
Please, note hardware EF 000024 position.
EF 000024
04
09
06
03
Connect pieces 03 and 04, insert hardware
EF 000216 and turn to tighten.
STEP 9
Fit pieces 12, 13 and 14 in the specific spaces.
EF 000024
Please, note hardware EF 000024 position.
14
13
04
03
12

05
01
04
Connect the parts assembled in the steps 8 and 9 using hardware
EF 000132.
EF 000024
Attach pieces 10 and 11 to assembled furniture.
11
10
11
STEP 10
Turn the furniture to connect piece 02 to the part assembled in
the previous step insert hardware EF 000216 and turn to tighten.
Please, note hardware EF 000024 position.
STEP 11
STEP 12
02
03

1
2
Attach the parts 1 and 2 using hardware EF 000106,
3
according the image, then fit the part 3.
Use the chalk to give the final finish on the product.
Sticker
Use the chalk to give the final finish on the product.
Chalk
12
STEP 13
11
10
STEP 14
STEP 15