En-4 D.121.000.V0
OUTLAND LIVING ®• SUNSHINE COAST • MODULAR OUTDOOR FURNITURE SYSTEM • CHAIR • OLSC-121
Owner & Safety Manual
®
STEP 2
On a level, non-marking surface, fasten the (2x) Side Panels to the Chair Back with (2x) Brackets and (8x)
¾
” Length Screws.
Use the provided Hex Key Tool.
a) Confirm the feet mounting holes are facing down.
b) Confirm the Side Panels are mounted flush with the sides and aligned with the bottom of the Chair Back.
c) After confirming A & B above, firmly tighten the (8x) bracket screws.
(8x) ¾” LENGTH
SCREWS
(8x) ¾” LENGTH
SCREWS
(2x) SIDE PANELS (2x) SIDE PANELS
(2x) BRACKETS
(2x) BRACKETS
CHAIR BACK
(8x) FEET SCREW HOLES
IMPORTANT: Ensure these
holes are all facing down!
SECTION 1: ASSEMBLY
STEP 1
Unpack all parts on a level, non-marking surface.
Use scissors to open the vacuum-packed cushion bags.
Be careful not to cut the cushions.
HANDLE WITH CARE
The Sunshine Coast modular component furniture
system features high quality aluminum frames,
woven with 100% new all-weather HDPE resin
wicker and luxury cushions constructed with
premium SUNBRELLA®materials.
ATTENTION:
The cushions will be wrinkled due to being vacuum-
packed. DON’T WORRY! The wrinkles will naturally
work themselves out. Vacuum-packing has reduced
the packing box size and is a key component of the
E-commerce shipping innovation.
SCISSORS KNIFE
ATTENTION:
Note the screw holes for
mounting the feet on the
(1x) Front Panel and (2x)
Side Panels.
