Outsunny 842-073 User manual

ASSEMBLY INSTRUCTION
INbd080V01_US
842-073_842-092
READ AND SAVE THIS INSTRUCTION FOR FUTURE USE
INSTRUCTION MANUAL

Please check all packing material carefully before discarding, as some parts may be
encased in the packing material.
Part List:
Tool required: Allen Wrench (provided)
Part List Description Qty. Drawings
ATop Frame 4
BLeg 4
CFrame Support Part 4
DLog Grate 1
EFire Bowl 1
FMesh Lid 1
GLid Ring 1
HBolt 36+2
IPoker 1
JAllen Wrench 1
LPVC Cover 1

Assembly Instruction:
Estimated Assembly Time:20 Minutes DO NOT over
tighten the hardware.
Step 1) Place parts on a smooth
even surface,Fix 4 pieces Top
Frame (A) by using Bolt (H) into
Square frame
(View Fig.1).
[16 x (H)
Step 2) Attach Frame Support Parts
(C) to Legs (B) by using Bolts (H).
Tighten all hardware accordingly with
an Allen Wrench (J) (provided) and
adjustable wrench until all pieces fit
together securely.Turn the
assembled fire pit frame over so that
it sits securely (legs down) on a flat
surface
(View Fig.2).
[16 x (H)]

WARNING!
•The use of alcohol, prescription or non-prescription drugs may impair the ability
to properly assemble or safely operate this fire pit.
•When using this fire pit, exercise the same precautions you would with any open
fire.
•Do not use this fire pit for indoor heating. Toxic carbon monoxide fumes can
accumulate and cause asphyxiation or death.
Step 3) Attach Legs (B) to Top
Frame (A) with Bolts (H) Hand
tighten (View Fig.3)!
[4 x (H)]
fuego (E) (Vea Fig.4).
Step 4) Place Fire Bowl (E) in
the center of Top Frame (A)
and put Log Grate (D) in the
Fire Bow (E).Mount Lid Ring
(G) on the Mesh Lid (F),Then
place the assembled Mesh Lid
over the Fire Bowl (E) (View
Fig.4).

Special Warnings
> Check local bylaws before using the fire pit.
>This fire pit is intended for Outdoor Use Only! DO NOT use on wooden
decks.
>This fire pit is intended to burn Wood Logs Only! DO NOT burn coal, leaves
or other combustible materials in the fire pit.
>NOT for use by children. Keep children and pets away from the fire pit.
>Fire pit is hot, use with caution. NEVER touch hot fire pit with bare hands.
>NEVER leave burning fire pit unattended and always extinguish fire
completely before leaving the fire pit.
>Keep the fire pit at least 20 feet away from any flammable surface or
dwelling.
>DO NOT use near flammable or combustible objects or materials.
>Only CHROMED PLATED COOKING GRID is intended for cooking.LOG
GRATE is NOT intended for cooking and SHOULD NOT be used for this
purpose.
>Always use gloves and protective glasses when loading the fire pit or
extinguishing the fire.
>Have a fire extinguisher available near the fire pit in case of emergency.
Operation Instructions
>Place wood logs on grate and light with match. DO NOT overload logs.
>Please use Poker (provided) when handling.
>We do not recommend pouring water over the fire unless necessary. The
fire should be allowed to expire on its own.
Care and Maintenance
This fire pit is a quality-built product and is made to last for many years. The
frame structure of this unit is made of powder-coated steel extrusion and
should resist rusting under normal use. Should rusting occur, we suggest
using a steel brush on the affected area followed by a spray coating of high
temperature anti-rust paint. For additional rust proofing of the bowl, grate and
mesh lid we recommend that a coat of high temperature primer is applied
before use. You may cover the fire pit with a Protective Cover when the fire pit
is not in use. Ensure the fire pit has completely cooled down before using the
Protective Cover.