
2.Two indicator lights description:
(1) Photosensitive control switch, to sense external light. When the device is in a position
with a light source, it will work normally according to the working level. When the device
is in a position without a light source, machine will automatically shut down.
When the device is installed for a long time in a place where there is no light or insufficient
light to evoke the photoresistor, you can directly pull the device from the level 2 (10/240S)
to the shutdown, and then return to the level 1 (10/180S) to cancel the light detection
function ( Note: the operation should be consistent). Turn on the light sensor function,the
operation way is same as turn off process.
(2) One indicator light is to show working status. Green light on, indicating working; Yellow
lights on, indicating no essential oils or no oil can be detected. ( Please turn off the
machine when you refill oils.)
If the essential oil is undetectable,you can turn off Oil detection function by the follow
steps . Pull scent button in Level 1(10/180s ,then pull to OFF and back to Level1(10/180s
(noted:the operation must be consistent).To open the oil detection function,the operation
way is the same.
Red lights on, indicating that the voltage is lower than the working requirement and need
to be replaced the battery.
(1). All devices enjoy 12 months free maintenance (from the day of sale).
(2).Free maintenance requirements: Warranty card,invoice or other certification which can prove it
ordered from our company.
(3).The fault caused by human error or wrong operation is without warranty.
No scents
scents weak
Oil leak
Unusual
Noise
1.Check battery or the supply cable.
2.Check the installtion environment ,the machine can not in
dark place.
1. Check the sealing ring of air outlet tube whether damaged and
the suction pipe whether bent or blocked.
2.Check the spray nozzle whether loose or change to new one.
1.Check the atomizer whether damaged or not.
2.Check atomizer and oil bottle whether screwed tightly in parallel.
3.Check the pump working or change the spray nozzle.
1.Check pump whether fall out , and re-install the air pump.
2.Check the door of the machine whether loose or not locked.
3.Check the pump whether is low airflow and low pressure.
4.Check the pump tube and Oil tube connection.
10/180S
10/240S
10/360S
10/480S
10/600S
OFF
ON/OFF
ON/OFF
W/P=10S/180S
W/P=10S/360S
W/P=10S/480S
W/P=10S/600S
OFF
W/P=10S/240S
1.Concentration level setting:
Ⅴ.Operation Introduction Ⅵ.Fault Inspection
Level 1
Level 2
Level 3
Level 4
Level 5
Level 6
Ⅶ.Warranty and after-sales service
1.Equipment warranty and attentions
Key
Ⅷ.Accessories and spare parts
Name Quantity
Aroma device 1PC
1PC
1PC
1PC
1PC
1PC
5PC
USB Cable
User manual
Warranty card
Screw
Fragrance bottle(including cap)