Overmax ActiveCam 3.3 User manual

Activecam 3.3
User Manual
Before using, please read the user manual carefully.

All the contents of the manual are subject to change without prior notice.
Minimum system requirements
System requirements
Operating
system
PCCAM Microsoft Windows XP(SP3), Vista, 7, 8
Mac OS X version: 10.8.0 or up
MSDC Microsoft Windows 2000，XP, Vista, 7，8
Mac OS X version: 10.0.0 or up
CPU Intel Pentium 1GHz or faster
RAM Minimum 1GB
Sound card and graphics
card
Supporting DirectX 8 or higher.
Other USB 1.1 or 2.0 port

Product illustration
Menu button
Display
Lens
Remote control
IR sensor
Notification LED
Recording
LED indicator
Microphon

WiFi button /
Down button
HDMI port
Power / Mode button
.
Battery
compartment
MicroSD memory
Shutter / recording button /
OK button
MicroUSB port
Speaker

Battery charging
Using a USB port:
You can also charge your camera by connecting it to a computer's USB port using a USB cable. It is not
necessary to turn on the camera in order to charge it.
Using a car charger: The charging process starts automatically when you connect the camera to a car
USB cable

charger. It is not necessary to turn on the camera in order to charge it.
Memory card insertion / removal
1. Insert a TF memory card into the camera card slot according to the indicated direction, and
make sure that it is properly secured.
2. In order to remove the card from the slot, push it gently to unlock it and then pull it out.

Note:
1. If the camera is on, it turns off automatically just after the card insertion. In order to start to
use it, you need to turn the camera on again.
2. If a memory card is not recognized, remove it and then insert it into the camera card slot
again. If it does not work, please try to use another card.
3. We recommend using MicroSD cards with a Speed Class 6 or 10.

Operations
Turning on / off
Press and hold the Power button to turn the device on / off.
Switching between modes
The camera supports four operation modes. Short press the Mode button to switch between the
camera modes: sports camera mode - car camera mode - photo mode - preview mode.
Sports camera mode
Car camera mode
Photo mode

Note:
The moment the camera turns off it remembers the current mode and activates it once turned on
again.
Sports camera mode
Turn on the camera and press the Mode button to enter the sports
camera mode. Press the OK button to start recording. Press it again
to stop.
1. Current mode;
2. Video quality;
3. Video size: FHD 1080P(30FPS)
HD 720P(60FPS) / HD 720P(30FPS
4. Recording time;
5. Battery level.
Preview mode