Oversteel MAGNOX User manual

MAGNOX
RGB GAMING MOUSE
USER MANUAL

MAGNOX
Thank you for purchasing Oversteel Magnox gaming mouse.
Oversteel Magnox has 50 millions switch and also support on-board
memory which can save up to hundreds of dierent profiles.
Oversteel Magnox is a plug and play usb interface programmable
mouse, no need to install any driver for your first use. For more
enhanced settings and function. You can install the software from our
website: www.oversteelgaming.com

MAGNOX
SYSTEM REQUIREMENTS
TECHNICAL SPECIFICATION
OPERATING CONDITIONS
Operating systems: Windows XP/7/8/10; MAC OS
USB 2.0/3.0 port
• Pixart 3389 Gaming sensor
• Up to 400ips / 50g Acceleration
• On-the-fly Adjustable DPI 50-16000 DPI
• 1000 Hz Polling Rate
• Omron 50.000.000 Clicks Lifetime
• RGB 16.8 Million Customizable Color Options
• Eight Independently Programmable Buttons
• 1.8m Nylon Braided USB Cable
• Size: 130mm X 70mm X 40mm
1. Operating temperature: -25°C ~ 65°C ± 10°C
2. Storage temperature: -40°C ~ 70°C ± 10°C
3. Operating humidity: 10-90% rh
4. Storage humidity: -5-95% rh
LEFT BUTTON
DPI SHIFT
FORWARD
BACK
RIGHT BUTTON
MID BUTTON
DPI +
DPI -

MAGNOX
ADJUST LIGHTING KEY ASSIGNMENT
1. You can customize your LED color mode by clicking on the lighting
bar and choose your desire color mode and brightness.
2. You can change the color of the mouse illumination LED.
3. Select the single color that you want to use by selecting static mode
1. You can program your mouse button to any multimedia function and
gaming function by selecting the mouse number and select your
desire command on the button assign bar.
2. Press Apply to save changes.

MAGNOX
MACRO EDITING
* To create a new macro in settings, Input the macro key name and
then Input key list.
Example:
- Add macro key name “ASD”
- Press Start Record Button and type “ASD” then press Stop Recording
- You can edit delay time/cycle before saving.
- Press save/apply button to save your macro “ASD”
* To use your macro “ASD”
1. Go to Customize bar
2. Select button you want to apply the macro “ASD”
3. Then select macro and select ASD
4. Save & Apply
* To check your Macros
1. Go to notepad
2. Click the assigned macro button
3. It should type ASD
Note
“ASD” is just an example, you can sue your own keys for macros.
DPI and REPORT
1. Customize your mouse DPI level, Sensitivity, Scrolling speed,
& Report rate on DPI and report bar.
2. Program your mouse button to any multimedia function and gaming
function by selecting the mouse number and select your desire
command on the customize bar.
3. Press Apply to save changes.

MAGNOX
RGB GAMING MOUSE