Oversteel RADIUM User manual

RADIUM
RGB GAMING MOUSE
USER MANUAL

RADIUM
Thank you for purchasing Oversteel Radium gaming mouse.
Oversteel Radium has 20 millions switch and also support on-board
memory which can save up to hundreds of dierent profiles.
Oversteel Radium is a plug and play usb interface programmable
mouse, no need to install any driver for your first use. For more
enhanced settings and function.
You can install the software from our website
www.oversteelgaming.com

RADIUM
SYSTEM REQUIREMENTS
TECHNICAL SPECIFICATION
Operating systems: Windows XP/7/8/10; MAC OS
USB 2.0/3.0 port
• Pixart 3325 Gaming Optical Sensor
• Up to 100ips / 20g Acceleration
• On-the-fly Adjustable DPI 250-10000 DPI
• 1000 Hz Polling Rate
• Huano 20.000.000 Clicks Lifetime
• Ergonomic both handed design
• RGB 16.8 Million Customizable Color Options
• Seven Independently Programmable Buttons
• 1.8m Braided Fiber USB Cable
• Size: 125mm X 62mm X 42mm
LEFT BUTTON
FORWARD
BACK
RIGHT BUTTON
MID BUTTON
DPI +
DPI -

RADIUM
BUTTON ASSIGNMENT DPI SETTINGLED SETTING
1. You can program your mouse button to any multimedia function and
gaming function by selecting the mouse number and select your
desire command on the key assignment bar.
2 Press Apply to save changes.
1. Customize your mouse DPI level on DPI setting.
2. You can turn ON/OFF the DPI by check or uncheck the ON/OFF bar.
3. Press save to changes.
1. Customize your mouse Light eect, brightness and speed.
2. Press save to changes.

RADIUM
MACRO EDITING * To create a new macro in settings, right click in macro list bar, input
the macro key name and then Input key list.
Example:
- Add macro key name “ASD”
- Press Start Record Button and type “ASD” then press Stop Recording
- You can edit delay time/cycle before saving.
- Press save/apply button to save your macro “ASD”
* To use your macro “ASD”
1. Go to Customize bar
2. Select button you want to apply the macro “ASD”
3. Then select macro and select ASD
4. Save & Apply
* To check your Macros
1. Go to key assignment bar
2. Select button you want to apply the macro “ASD”
3. Then select Macro and select ASD
4. Save & Apply
Your button will be used as “ASD”
* To check your Macros
1. Go to notepad
2. Click the assigned macro button
3. It should type ASD
Note
“ASD” is just an example, you can sue your own keys for macros.
PARAMETER
1. Customize your mouse Sensitivity, Scrolling speed, Polling rate &
Double click speed.
2. Press save to changes.

RADIUM
RGB GAMING MOUSE