OYPLA Home 4563 User manual

User Manual
USER MANUAL Model No: 4563
Wall Dryer

Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
Do not discard any of the packaging until you have checked that you have all of
the parts and fittings required.
Do not carry out alterations or modifications to this product.
This product is intended for indoor and outdoor use.
Do not lean or support any heavy objects on the product to avoid product
damage.
Leaving the product outside exposed to weather, especially direct sun, rain and
salt air, will speed the weathering process. This can be slowed by removing the
product from these conditions or covering it with a suitable cover.
Ensure the product is fully secure before using it.
If the product is damaged or has any defects, please contact cs[email protected]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 4563

Parts list:
Please check you have all parts below before attempting to assemble this product.
If you are missing any of the parts below, please contact Oypla customer services: [e-mail]
“Please be aware you will be referring to this parts list throughout the assembly process”
1. To extend the wall dryer, pull the product out from both sides to get the product to the full level
of extension.
2. Mark four holes onto the wall you want to assemble this product to, ensuring they align fully
with the four holes on the wall dryer. Once you are confident the holes align with the product,
proceed to carefully drill the marked holes into the wall, deep enough to fully secure a wall plug.
3. Proceed to attach the product to the wall using the wall plugs and screws provided.
Part:
Quantity:
Wall Plugs
4
Screws
4
Assembly Instructions
*Please note that a drill will be required to assemble this product to a wall.
Imported by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 4563