OYPLA Home 3093 User manual
User Manual
USER MANUAL Model No: 3093
1200W Ash Vacuum
.
•This product is not a toy, and is only to be used for its designated purpose.
•This product is intended for indoor use only.
•Never carry out any alterations or modifications to this product.
•The ash vacuum is for cold ash only. Never use the ash vacuum on hot ash.
•Ensure the power supply to the socket into which the appliance is plugged, is in accordance
with the rating label on the appliance and that the socket is earthed.
•When the appliance is not in use, always unplug from the mains socket.
•To protect against electrical shock, do not immerse cord or the plug into water.
•Ensure the power supply to the socket into which the appliance is plugged, is in accordance
with the rating label on the appliance and that the socket is earthed.
•Make sure to regularly clean the filter to avoid any possible issues.
•Make sure that all obstacles that you do not intend to vacuum are cleared before using the
vacuum as these may cause the suction tube to block.
•Do not use the appliance to remove any burning or smoking objects, such as cigarette matches
or any flammable liquids.
•Keep the pipe and tube ends away from the body.
•Keep hair, loose items of clothing, fingers and all other extremities away from any openings
and moving parts.
•Never leave the vacuum next to a source of heat.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances or abrasive
materials.
•Do not expose the vacuum cleaner to the elements as this may cause the appliance to break.
•This appliance operates using dangerous voltage levels. Never switch it on if the power supply
cable is damaged, or if any other damage is visible on the appliance. Never open the housing but
instead contact a qualified electrician for help.
•If the product is damaged or has any defects, please contact cservice@oypla.com
USER MANUAL Model No: 3965
USER MANUAL Model No: 3093
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3093
Cleaning and Care
1. Before you begin to clean the product, make sure
that the product is off and is unplugged from the
socket.
2. Take the lid off of the ash vacuum by unclipping
the clips on the side of the lid and the ash vacuum
body. When removing the lid, be sure to not drop or
throw the lid to the side as the vacuum turbine is
built into the lid and doing so will cause damage to
the system.
3. Empty the ash vacuum into the correct bin. Wash
the inside of the ash vac. Place the lid/vacuum
turbine back inside of the ash vacuum.
4. Pop the wheels out of the underside of the base
corners. Run these under warm water and either dry
manually or leave them to dry. Pop these back into
the corners once they’re dry.
5. Before plugging the product back in, make sure all
areas around the electrical components are dry to
avoid injury and product damage.
Before First Use
•Remove the lid and take all the parts out from
inside the ash vacuum. Be sure to check that you
have all the parts. Pop the wheels into the underside
of the base corners of the ash vacuum.
•Attach the lid back on to the ash vacuum body,
ensuring that you do not damage the filter in the
process.
•Be sure to check the labels on the plug and ensure
the volts correlate to the volts from the wall socket.
How to Use
1. Place the input tube inset the top hole in the ash
vacuum.
2. Plug the ash vacuum into the nearest power
outlet. Do not place it at a distance that will cause
the power cable to becoming a safety hazard.
3. Press the ‘ON/OFF’ switch into the ‘ON’ position.
This will cause the ash to begin to be sucked into the
vacuum cleaner. Allow the ash vacuum work. Allow
this to continue until the ash vacuum is full or you
have cleaned the desired area.
4. Once finished, unplug the ash vacuum and wrap
the plug around it. Remove the input tube from the
ash vacuum and empty the ash vacuum itself. Store
the ash vacuum in a safe place.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Environmental Protection
Products bearing the symbol shown above means that used electrical and electronic equipment (WEEE) should not be mixed with general
household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be
accepted free of charge. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on
human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for
further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with
your national legislation.
Please retain a copy of all
instructions for future
consultation.
Other OYPLA Home Vacuum Cleaner manuals
