Manual Version: v1.0
Model Code: 3907
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact
-Please be aware that you will be referring to this parts list throughout the
assembly process.
•Aluminium Frame x1
•Spring x2
•Plastic Base x1
•Bolt x2
1Front Cover
-
2Safety
Instructions
-
2Warnings
-
2Assembly
Instructions
-
4Back Cover
-
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•Make sure all fastenings are tightly in
place, and that everything is in order,
before using the product.
•This product is not a toy, and is only to
be used for its designated purpose.
•Do not discard any of the packaging until
you have checked that you have all of
the parts and fittings required.
•Avoid placing in areas that are exposed
to strong winds.
•Only use this product on stable and level
ground.
•Do not bend the sign frame over 60
degrees.
•If the product is damaged or defective,
⚠Pinch points can cause injury! Keep
loose fingers, clothing, jewellery and hair
away when closing/opening the frame sides.
⚠Do not overfill the base with water in
the winter. Water may freeze and expand,
damaging the product.
