Oypla 3073 User manual

Page 1
Model Code: 3073
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 3073
Contents
1 Front Cover
-
2 Safety
Instructions
-
3 Assembly
Instructions
-
4 Assembly
Instructions
-
5 Back Cover
End
Lawn Aerator

Page 2
Model Code: 3073
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
5Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•This product is not a toy, and is
only to be used for its designated
purpose.
•Never carry out any alterations or
modifications to this product.
•Unpacking, installing and fixing
the parts are to be completed by
an adult.
•This product is intended for
outdoor use only.
•Makes sure the area in which you
wish to use the lawn aerator has
been cleared of objects before
use.
•This product is not intended for
use by persons (including
children) with reduced physical,
sensory and mental capacities, or
lack of experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the product by
persons responsible for their
safety.
•Leaving the product outside
exposed to weather, especially
direct sun, rain and salt air, will
speed the weathering process.
This can be slowed by removing
the product from these
conditions, or covering it with a
suitable cover.
•Clean only with a damp cloth. Do
not use strong industrial cleaning
substances or abrasive materials
as these will damage the product.
Be sure to clean the aerator
spikes regularly to maintain the
highest level of performance.
•This product is not suitable for use
by children.
•This product has lots of very sharp
points. Ensure safety gloves are
worn when using the product to
avoid personal injury.
•If the product is damaged or has
any defects, please contact
[email protected].
⚠This product has lots of
very sharp points. Ensure safety
gloves are worn when using the
product to avoid personal injury.
Warnings

Page 3
Model Code: 3073
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact
[email protected]
-Please be aware that you will be referring to this parts list throughout the
assembly process.
5. Bolt Set
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
5Back Cover
End
Assembly Instructions
1
To begin, remove all the parts from the carton. After this, unscrew the
nut and washer from the side of the aerator. Once done, place a
connector bar (part 3) onto the end of the aerator. Secure this in place
with the washer and a nut. Please see the images below for more detail.
Repeat on the other side once done.

Page 4
Model Code: 3073
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
5Back Cover
End
2
3
To assemble the handle, push the handle end (part 2) and the handle
lower (part 4) onto either side of the handle centre (part 1). Be sure that
they lock into place using the pressure buttons found on the handle
centre (part 1). Please see the image below for more detail.
Part 5
Part 5
Part 5
To attach the handle to the aerator section, align the holes in the handle
lower (part 4) with the holes found in the top of the connector bar (part
3). Next, push a bolt (part 5) through both of the holes, making sure they
go through both the handle lower (part 4) and the connector bar (part
3). Once they do, push a washer (part 5) onto the exposed sides of the
bolts and secure them in place using a nut each (part 5). Please see the
image below for more detail.

Page 5
Model Code: 3073
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety
Instructions
-
3Assembly
Instructions
-
4Assembly
Instructions
-
5Back Cover
End