ozonos TRIPOD User manual
QUICK START GUIDE
OZONOS TRIPOD
STARTUP
IMPORTANT INFORMATION
This manual describes the correct installation of the device.
Please follow all steps properly and observe warnings and
notes!
2019/02
STEP 2
Loosen the locking
screw of the tripod
legs until they can be
moved.
STEP 1
Mount the holder for
the OZONOS Aiclea-
ner firmly on the thread
of the tripod.
STEP 3
Pull your legs apart to a
maximum angle where
they are stable.
Tighten the locking
screw again.
STEP 4
Loosen the locking
screw on the wheel and
insert the metal piece.
SETUP OZONOS TRIPOD
STEP 6
Tighten the brake of
the mounted wheel.
Repeat steps 4-6 for
all three wheels.
STEP 5
Now attach the roll.
The brake must point
outwards and the lo-
cking screw inwards!
Ziehen sie nun die
Feststellschraube
wieder fest.
2019/02
ATTACHING OZONOS AIRCLEANER
STEP 1
Loosen the screw of
the wall bracket on
the longside of the
OZONOS. Now slide
the wall bracket off the
unit.
STEP 3
Screw the device onto
the holder of the tripod.
Use the crew from
Step 1.
STEP 2
Slide the device onto
the holder of the
tripod.
Start on the unrounded
side of the holder.
DO YOU HAVE ANY QUESTIONS? CONTACT US NOW:
OZONOS GmbH
Friedensstraße -
Salzburg · Austria
T+ () / -
F+ () / -
Mfrischluf[email protected]t
Wwww.ozonos.at
ATTENTION!
Please release the brakes of the tripod only for moving!
Please make sure that all screws are always tight!
Always extend the legs to the maximum angle to ensure a stable stand of the tripod!
OPERATING
INSTRUCTIONS FOR THE
OZONOS AC- SERIE
CAN BE FOUND AT:
WWW.OZONOS.AT/ANLEITUNGEN
OR SIMPLY SCAN QR-CODE:
TECHNICAL DATE:
DESCRIPTION OZONOS TRIPOD:
DIAMETER 33-29-25 mm
HEIGHT maximum 300cm
NET-WEIGHT 1,6 kg
LOAD 9 kg
Table of contents
