PAC Cylinder Mate CM6000 User manual
Cylinder Mate P/N CM6000 INSTALLATION INSTRUCTIONS
PERFORMANCE ADVANTAGE COMPANY 4-3-17
CAUTION
To avoid the risk of personal injury, property damage or product damage, please use the included
fasteners for mounting.
* This product must be securely mounted to a stable surface and material.
* This product contains enough mounting hardware to assemble two Cylinder Mates to each other.
* Misuse of this product may result damage or injury and void warranty.
* Verify that all fasteners have been tightened securely before putting into service.
* Note: All included fasteners may not be utilized for every installation.
Items Required for this step Qty
page1
Option 1: Single Cylinder Mate CM6000 Mounting
Position Cylinder Mate in desired location with the non-windowed side on the primary
mounting surface. (see Figure 1A) Using the included hardware, attach the cylinder mate with (4) Carriage
Bolts P/N 2037 and (4) Nuts P/N 2042 to the mounting surface. Installer to locate and drill (17/64) holes for
mounting.
PAC Fastener
Kit
P/N 7037
not
included
¼-20 x ¾
Carriage Bolt
P/N 2037
FIGURE 1A
4
4
¼-20 Flanged Nut
P/N 2042
Small 7/16
ratcheting Wrench
(STANDARD VERSION)
INS-CM6000
www.pactoolmounts.com
Remove the attaching screw and replace strap.
The CM6000 Cylinder Mate can accept P/N CM-
20 strap. Contact a PAC representative for more
information.
CM-20 Locking
Strap
Strap Mounting Screw
FIGURE 1B
Option 2 – Assembly to Additional Cylinder Mate CM6000 Units
PAC Cylinder Mates are designed to attached together to form storage units. Cylinder Mates can be
arranged in various configurations to accommodate storage space.
FIGURE 2a
When attaching an additional Cylinder Mate to
the top of another (See Figure 2a) , use the same
(4) mounting locations as the one below.
FIGURE 2b
page2
Items Required for this step Qty
PAC Fastener
Kit
P/N 7037
¼-20 x ¾
Carriage Bolt
Small 7/16
ratcheting Wrench
P/N 2037
4
4
¼-20 Flanged Nut
P/N 2042
When attaching an additional Cylinder Mate to
the side of another, use the mounting locations
as shown in Figure 2b. Only seven fasteners are
required for side mounting.
not
included
Table of contents
