PACIFIC CYCLES 2Rider User manual

2Rider Assembly manual
2Rider Electric
Operation manual
Seats Handlebar
Grip shifter
Brake
Luggage tray
Rear wheel Front wheel
Suspension Pedal
Rear
deraileur
Bumper
Battery
Power switch (driver side)
Power switch (passenger side)

2Rider Assembly manual
2
Step 2:
Turn on the power switch (top
photo: driver side bottom photo:
passenger side) and the 2Rider is
ready to ride. Press the button at
top left to switch the power
output (L(low)-M(mid)-H(high)).
Step 1:
Turn on the battery power at
the back of the seat stay. The
power is supplied
independently to both side of
drivetrain.

2Rider Assembly manual
3
Battery installation / removal:
Turn the key to unlock the battery,
slide left to remove.
Check the battery
indication:
Press the button on top of the
battery to see the signal is
strong (3 green light and 1
red light) or weak (red). Use
the battery charger included
to charge 3 to 5 hours when
the battery signal turns red
only.