Pacific Sun Power Plug User manual

Power Plug
Smart Power Switch for Cloud App
User Manual
ver. 1.0
www.Pacific-Sun.eu
IOcloud

Page 2
CalcFeeder PRO Calcium Reactor
Table of Contents
1. Introduction ........................................................................................ 3
2. Power Plug Information and Features ............................................... 3
2.1. Device Features............................................................................................................3
2.2. Technical Specifications..............................................................................................3
3. Power Plug - Smart Power Switch ..................................................... 4
3.1. Adding Power Plug to Pacific Sun Cloud....................................................................5

Page 3
CalcFeeder PRO Calcium Reactor
1. Introduction
Dear Customer,
Thank you for purchasing the Pacific Sun Power Plug.
With the purchase of this unit, you have selected a top quality product. It has been
specifically designed for aquaristic purposes and has been tested by experts. With this
unit, you are able to adjust the calcium level as well as the carbonate hardness in your
seawater tank simply and efficiently in order to achieve optimum levels.
For best results, please read through this instruction manual before installing the Power
Plug on your system.
During or after installation, please do not hesitate to contact our technical support team
at [e-mail] if you have any questions about your new calcium reactor.
2. Power Plug Information and Features
2.1. Device Features
PowerPlug is a manageable (wireless controlled) power socket. You can use it to control
any devices: lamps, heaters, skimmers based on set parameters.
One of the use cases can be for example:
- when the temperature in the aquarium rises above the allowable - can turn on the
aquarium cooler.
- in cooperation with an optical sensor (connected to Kore 5th/7th) - can protect the
skimmer against overflow.
The Power module can coexist with other Pacific Sun devices added to the PS Cloud
ecosystem. In the case of setting “Rules” – when Kore 7th works with the kHLab module
(depending on the set water hardness) it can turn ON or OFF the Calcium Reactor effluent
dosing (control pump which is dosing aquarium water to the Calcium Reactor).
PowerPlug is equipped with a module measuring the current and voltage consumed by
the connected device.
You can also use it to control the correct operation of the devices (clogged circulation
pump, skimmer pump, etc.).
PowerPlug is easily and transparently managed via the application (accessible from any
browser – including e.g.: SMART TVs).
This device has a built-in scheduler allowing to program ON/OFF functions for each day
of the week such as controlling an algae reactor.
2.2. Technical Specifications
‒ Input voltage: 100-240V
‒ Maximum rated current: 10A (2300W)

Page 4
CalcFeeder PRO Calcium Reactor
3. Power Plug - Smart Power Switch

Page 5
CalcFeeder PRO Calcium Reactor
3.1. Adding Power Plug to Pacific Sun Cloud
1Connect to your home
Wi-Fi internet network,
open Internet Browser, and
go to the following address:
https://cloud.pacific-sun.eu
Click Create an account
Note:
If you already have PS account
and Added a new tank - skip
this step and go to step nr 6
2Create Cloud Pacific Sun
account.
Enter Email address
Enter Password
Enter Password Again
Next Click Submit
1
2
3
1
1
2
3
1
3After login, on the
Dashboards:
+
Click Add new tank
1
1

Page 6
CalcFeeder PRO Calcium Reactor
4Add a Tank:
Type in your preferred Name
Click Add tank
1
1
5Under your tank Name:
+
Click Add Device
1
1
6Type In your preferred
Name and select the
device from the list:
Pacific Sun Power Module
Click Add Device
1
1

Page 7
CalcFeeder PRO Calcium Reactor
7Under your Power Module
Name Note you ID device
number:
ID: ####
1
1
8Connect Power Plug
to the power outlet.
Find your Power Plug
on your Wi-Fi network list
devices.
Click Connect directly to
the Pacific_Sun_ Power
Plug_Module Wi-Fi
Network.
9New window Pacific Sun
Power Module will
automatically Pop Up:
Click:
Scan for wifi networks
1
1

Page 8
CalcFeeder PRO Calcium Reactor
10 Connect Power Module to
your Home WiFi network:
Select your Home WiFi
network under the
Network list.
1
1
11 Connect Power Module to
Home WiFi network and
PS Cloud:
Your Home WiFi network
Type in your Home WiFi
network password
Type in your Cloud
Username
Type in your Cloud
Username password
Type in your Cloud Device
ID XXXX from step 7
Next Click: Save
1
1
12 Now, under your PS Cloud
user interface, you should
see an active Power Plug
device:
Last online
You can test the device by
clicking the Power ON/OFF
button
1
2
2
3
4
5
2
3
4
5
6
6
2
1

Copyright:
Pacific Sun Sp. Z o.o.
ul. Ogrodników 22
84-240 Reda
Poland
tel. + 48 58 778 17 17
email: [e-mail]
If you need technical support - please contact with [e-mail]