PackshotCreator PackshotStart Mark II Instruction Manual

PackshotStart Mark II
QuickStart
INSTALLATION GUIDE

PackshotStart Mark II
lightbox
Product Registration Sheet
& Quick Reference Guide
© Sysnext. All rights reserved.
This material is not to be interpreted as a guarantee of earnings and may not be copied, reproducved, modied, published, uploaded, posted or
distributed in any way, without PackshotCreator’s prior consent.
PackshotStart Mark II
PACKAGE COMPOSITION
1 power cable
1 USB cable
3 acrylic panels
2x
2 camera mount
sponges
2 reective door
covers
White background
for side shots
2 blacks sheets
PVC
White oor cover

PackshotStart Mark II
SPECIFICATIONS
Dimension (L x W x H): 61cm x 61cm x 71cm
Maximum Target Size
Top Shots: 40cm x 50cm
Side Shots: 40cm x 50cm x 52cm
Total Weight: 25kg
Maximum Object Weight: 20kg
Email: [e-mail]
Website: http://esupport.packshot-creator.com
CONTACT INFO:

PackshotStart Mark II
HARDWARE INSTALLATION
ACRYLIC PANEL INSTALLATION:
01 02 03
Take off the top. Install the two front acrylic diffusion
plates by sliding them down from
the top.
Three acrylic side diffusion panels
came with the system – two solid
and one with an opening.
Choose which two panels to use.
Slide in the panels from the top.
Be sure to place the panels on the
holding brackets at the base.
Replace the top. Make sure to
orient the top so that the camera
strap goes le to right when viewed
from the front. Note: Align the
acrylic panels with the holding
brackets at the top to hold them
in place.
Fix the top using 4 white hand
screws. If you use the acrylic side
diffusion panel with the opening,
remove the side wall and attach
the reective door cover for
convenient side loading.
04 05 06

PackshotStart Mark II
HARDWARE INSTALLATION
CABLE CONNECTION:
01 02 03
04 05
Plug one end of the power and
USB cable into the system and the
other end into a power jack.
Plug computer USB port
respectively.
Connect a compatible camera
to your computer by USB.
(Optional): Instead of batteries,
we recommend using an AC power
adapter to power your camera.
(Optional): For almost all SLR
cameras featuring remote capture
capabilities, PackshotCreator can
supply a custom shutter release
cable to connect the camera
to the system so software can
automate image capture. In this
conguration, captured images
are saved to the memory card.
Turn on the power.

PackshotStart Mark II
HARDWARE INSTALLATION
USING PACKSHOTSTART MARK II
WITH PACKSHOTSPIN O3T TURNTABLE 1/3:
01 02 03
Remove the four white hand
screws and take off the top.
Remove the acrylic side diffusion
panels and both side walls.
Disconnect the cable connecting
the bottom light with the base.
Remove the white hand screws on
each side of the bottom light.
Remove the bottom light panel. Replace with the white oor cover.
04 05 06

PackshotStart Mark II
HARDWARE INSTALLATION
USING PACKSHOTSTART MARK II
WITH PACKSHOTSPIN O3T TURNTABLE 2/3:
07 08 09
Replace the side walls and top then
secure the four white hand screws.
Place the PackshotSpin O3T
turntable inside the PackshotStart
Mark II studio.
Plug one end of the USB cable into
the turntable.
Connect the other end of the USB
cable into the USB port located
inside the studio.
Plug one end of the power cable
into the turntable.
Connect the other end of power
cable into the power jack located
on the oor of the machine.
10 11 12

To complete USB connection, plug
one end of another USB cable
into the left side of the light box
(“Turntable port”).
Connect the other end of the USB
cable to your computer.
Note: An extra USB cable was
supplied.
Turn on the power.
13 14 15
16 17 18
(Optional): If necessary, the
custom shutter release cable from
the camera can be connected to
either the system or the turntable
so software can automate 360
degree image capture.
Put the matte round product stand
on the turn table platform to assist
in creating images with pure white
or transparent backgrounds.
Note: Item sold separate.
PackshotStart Mark II
HARDWARE INSTALLATION
USING PACKSHOTSTART MARK II
WITH PACKSHOTSPIN O3T TURNTABLE 3/3: