PACLITE Equipment WP-80 User manual

Owner’s Manual
Water Pump
WP-80
NOTE
Before using this equipment, ensure that the operator has read and fully
understands all instructions in this manual.

EC DECLARATION OF CONFORMITY / DECLARATION CE DE CONFORMITE /
DECLARACIÓN DE CONFORMIDAD CE / DECLARAÇÃO CE DE CONFORMIDADE
Nous soussignés, Uni-corp Europe, ZAC des Petits Carreaux 12 rue des Coquelicots 94380 Bonneuil Sur Marne, certifions que si le produit
décrit dans ce certificat est acheté chez un distributeur de la marque déposée “Paclite” au sein de l'AEE, celui-ci est conforme aux
normes CEE ci-après : Norme de la machine 2006/42/CE, Norme compatible pour l'électromagnétisme 2004/108/CE (modifiée
par 92/31/CEE et 93/68/CEE). Le nombre de vibrations est en accord avec la directive 2002/44/CE. Caractéristiques basse tension
2006/95/CE, BS EN ISO 12100-1/2. Sécurité des machines et des normes harmonisées associées, le cas échéant. Les émissions
de bruit sont conformes à la directive 2005/88/CE Annexe VI) pour les machines en vertu de l'article 12, l'organisme notifié est
TÜV Rheinland Product Safety GmbH - Am Stein Grauen - D-51105 Köln, Allemagne.
Nous soussignés, Uni-corp Europe, ZAC des Petits Carreaux 12 rue des Coquelicots 94380 Bonneuil Sur Marne,certifions que si le produit
décrit dans ce certificat est acheté chez un distributeur de la marque déposée “Paclite” au sein de l'AEE, celui-ci est conforme aux
normes CEE ci-après : Norme de la machine 2006/42/CE, Norme compatible pour l'électromagnétisme 2004/108/CE (modifiée par
92/31/CEE et 93/68/CEE). Le nombre de vibrations est en accord avec la directive 2002/44/CE. Caractéristiques basse tension
2006/95/CEE, BS EN ISO 12100-1/2, Norme de sécurité des machines et des critères associés et configurés, si applicable. Les
émissions de bruit sont conformes à la directive 2005/88/CE Annexe VI pour machines, article 12. L'organisme notifié est TÜV
Rheinland Product Safety GmbH - Am Stein Grauen - D-51105 Köln, Allemagne.
La Sociedad, Uni-corp Europe, ZAC des Petits Carreaux 12 rue des Coquelicots 94380 Bonneuil Sur Marne por el presente documento
certifica que si el producto descrito en este certificado es comprado a un distribuidor autorizado de Paclite en la EEA, este es
conforme a las siguientes directivas: 2006/42/CE de la CEE, Directiva 2004/108/CEE sobre Compatibilidad Electromagnética
(según enmiendas 92/31/CEE y 93/68 CEE). El numero de vibraciones esta de acuerdo con la Directiva 2002/44/CE. Directiva
sobre Bajo Voltaje 2006/95/CEE, BS EN ISO 12100-1/2 de Seguridad de Maquinaria y Niveles armonizados estándares asociados
donde sean aplicables. Emisión de Ruídos conforme a la Directiva 2005/88/CE Anexo VI para máquinas bajo articulo 12 la
mencionada unidad está TÜV Rheinland Product Safety GmbH - Am Grauen Stein - D-51105 Köln, Germany.
O signatário, Uni-corp Europe, 33 Avenue Pierre Brossolette, 94048 Créteil Cedex, France, pelo presente, declara que se o
produto descrito neste certificado foi adquirido a um distribuidor autorizado do Paclite em qualquer pais da EEA, está em
E
P
GB/US
F
PRODUCT TYPE……
MODEL……………….
SERIAL No…………..
DATE OF
TYPE DE PRODUIT….
MODÈLE ...................
Nº DE SÉRIE………….
DATE DE
TIPO DE PRODUCTO..
MODELO……………...
Nº DE SÉRIE………….
FECHA DE
TIPO DE PRODUCTO..
MODELO……………...
Nº DE SÉRIE………….
DATA DE

SAFETY ALERT & HAZARD SYMBOLS
SAFETY ALERT SYMBOLS
The following safety alert symbols will inform you about potential hazards that could injure
you or others. They represent the level of exposure to the operator, and are preceded by
one of three words: DANGER, WARNING, or CAUTION.
DANGER: You WILL be KILLED or SERIOUSLY injured if you DO
NOT follow directions.
WARNING: You CAN be KILLED or SERIOUSLY injured if you DO
NOT follow directions.
CAUTION: You CAN be injured if you DO NOT follow directions.
HAZARD SYMBOLS
Engine exhaust fumes contain poisonous carbon monoxide. This
fume is colorless and odorless, and can cause death if inhaled.
NEVER operate this equipment in a confined area or enclosed
structure that does not provide ample free flow air.
Explosive Fuel
Gasoline is extremely flammable, and its vapors can cause an
explosion if ignited. DO NOT start the engine near spilled fuel or
combustible fluids. DO NOT fill the fuel tank while the engine is
running or hot. DO NOT overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or sparks from the ignition
system. Store fuel in approved containers, in well ventilated areas and
away from sparks and flames. NEVER use fuel as a cleaning agent.
Brulures
Engine components can generate extreme heat. To prevent burns,
DO NOT touch these areas while the engine is running or
immediately after operations. NEVER operate the engine with heat
shields or heat guards removed.
Pièces rotatives

NEVER operate equipment with covers, or guards removed. Keep
fingers, hands, hair and clothing away from all moving parts to
prevent injury.
Accidental Starting
ALWAYS place the engine ON/OFF switch in the “OFF” position
when the equipment is not in use.
Over Speed Conditions
NEVER tamper with the factory settings of the engine governor or
settings. Personal injury and damage to the engine or equipment can
result if operating in speed ranges above maximum allowable.
NOTE
This equipment, other property, or the surrounding environment could be damaged if you
do not follow instructions.
Respiratory Hazard
ALWAYS wear approved respiratory protection.
Sight and Hearing Hazard
Equipment Damage Messages
Other important messages are provided throughout this manual to help prevent damage
to your equipment, other property, or the surrounding environment.
SAFETY MESSAGES
CAUTION:
For your own personal safety and those around you, YOU MUST
READ and ensure you FULLY UNDERSTAND the following safety
information. It is the responsibility of the operator to ensure that
he/she fully understands how to operate this equipment safely. In the
event you are unsure about the safe and correct use of the water
pump.
The following safety guidelines should always be used when operating the water pump.

CAUTION:
IMPROPER maintenance or use can be hazardous. READ and
FULLY UNDERSTAND this section before you perform any
maintenance, service or repairs.
•This equipment is to be used for its intended application only.
•This equipment must be operated only by well-trained personnel.
•The owner of this equipment must observe, and train the operator of the equipment to
observe the effective Labor Protection Regulation in the country of application.
•Use a suitable lifting equipment to lift the equipment.
•Cordon off the work area and keep members of the public and unauthorized personnel
at a safe distance, including animals.
•Keep FINGERS, HANDS, HAIR and
CLOTHING away from moving parts.
•Never allow a person to act as a weight for this equipment.
•Personal Protective Equipment (PPE) must be worn by the operator whenever this
equipment is being used.
•Make sure you know how to safely switch this equipment OFF before you switch it ON
in case you get into difficulty.
•Always switch OFF the engine before
servicing it.
•During use, the engine becomes very hot.
Allow the engine to cool before touching it.
•Never leave the engine running and unattended.
•Never remove or tamper with any guards fitted, they are there for your protection.
Always check guards for condition and security. If any are damaged or missing, DO
NOT USE THE EQUIPMENT until the guard has been replaced or repaired.
•Do not operate the machine when you are
ill, feeling tired, or when under the
influence of alcohol or drugs.
WARNING:
Fuel is highly flammable. It may cause injury, death or property
damage. SHUT DOWN the engine, extinguish all open flames and
DO NOT smoke while filling the fuel tank. ALWAYS wipe up any
spilled fuel.
•Before refueling, switch off the engine and allow it to cool.
•When refueling, DO NOT smoke or allow
naked flames in the area.
•When refueling, use proper funnel, and avoid spilling over the engine.

•Spilt fuel must be made safe immediately, using sand. If fuel is spilt on your clothes,
change them.
•Store fuel in an approved, purpose made container away from heat and ignition
source.
PPE (Personal Protective Equipment)
Suitable PPE must be worn when using this equipment i.e. Safety Goggles, Gloves, Ear
Defenders, Dust Mask and Steel Toe capped footwear (with anti-slip soles for added
protection). Wear clothing suitable for the work you are doing. Always protect skin from
contact with concrete.
CARBURANTS
Do not ingest fuel or inhale fuel vapors and avoid contact with your skin. Wash fuel
splashes immediately. If you get fuel in your eyes, irrigate with copious amounts of water
and seek medical attention as soon as possible.
WARNING:
The exhaust fumes produced by the engine are HIGHLY toxic and
CAN KILL!
Do not operate your water pump indoors or in a confined space, make
sure the work area is adequately ventilated.
Engine
See instructions supplied by engine manufacturer. Be sure to initially
put oil in engine and check level regularly. Low speeds extend
engine life dramatically. We recommend for continuous pumping that
the pump be operated at approximately 3000r.p.m.

SPECIFICATION & TECHNICAL DATA
Model P-80
Inlet and Outlet Diameter 3.0"
Flow Capacity(L/Min) 1000
Suction Head(Meter) 7
Delivery(Meter) 28
Pump Set Package Dimension(mm) 530X390X465
Gross Weight of Pump Set(KG) 27.5
Engine(HP) 5.5
PUMP CURVE
3' water pump
0
5
10
15
20
25
30
0 200 400 600 800 1000 1200
Flow (L/min)
Total Head(m)
OPERATION
PUMP PLACEMENT
For best pump performance, place
the pump close the water level
\and use hoses that no longer
than necessary. That will enable
the pump to produce the greatest
output with the least self-priming time.
As head (pumping height) increases,
output decreases. The length, type,
and size of the suction and discharge
hoses can also significantly affect pump
output.
Discharge head capability is always greater than suction head capability, so it
is important for suction head to be the shorter part of total head. Minimizing
suction head is also very important for reducing self-priming time.

SUCTION HOSE INSTALLATION
Use the commercially available hose and hose connector with the hose clamp
provided with the pump.
Use a hose clamp to securely fasten the connector to suction hose in order to
prevent the air leakage and loss of the suction. Verify that the hose connector
sealing washer is in good condition.
Install the strainer on the other end of the suction hose, and secure it with a
clamp. The strainer will help to prevent the pump from becoming clogged or
damaged by the debris.
DISCHARGE HOSE INSTALLATION
Use a commercially available hose
And hose connector, and clamp.
It is best to use a short, large-diameter
hose. That will reduce fluid friction and
improve output.
Tighten the hose clamp securely to
Prevent the discharge hose from
disconnecting under high pressure.
PRIMING THE PUMP
Remove priming plug and fill pump and suction pipe with water. Pump is
equipped with suction flap valve and should be capable of drawing air out of
normal size suction pipes or hoses. Replace plug and start the pump. If the
pump pumps a little and stops, turn the pump off, check suction pipe for
possible leaks and repeat priming procedure until the pump operates

satisfactorily.
Warning: Operating the pump dry will damage the pump seal. If the pump
has been operated dry, stop the engine immediately, and allow the pump to
cool before priming.
TYPE OF WATER
Pumps are capable of pumping septic tank effluent, sink wastes, small
amounts of dirt or sand, drainage or polluted water and some industrial wastes.
They are not designed to pump large quantities of foreign matter. If fluid
contains large or stringy material, then an adequate suction strainer should be
used.
If chemicals are to be pumped, compatibility of pump material should be
checked with your local office.
STAETING THE ENGINE
Prime the pump
1. Move the fuel valve
level to the on position
2. Move the choke to CLOSED position. No need for restart a warm
engine
4. Move the throttle level away from SLOW position, about 1/3 of the way
toward the FAST position
5. Turn the ignition switch to ON position

6. Pull the starter grip lightly until resistance is felt, then pull it briskly
7. When engine running, moved the choke level to CLOSE position.
SETTING ENGINE SPEED
After starting the engine, move the throttle level to FAST position for
self-priming, and check pump output. Decreasing the engine speed will low
the pump output.
PARTS LIST

Ref. No. Description QTY Ref. No. Description QTY
1 Base frame set 1 15 Check valve 1
2 Engine 1 16 Suction flange 1
3 Bolt 4 17 Bolt 3
4 Bracket 1 18 D/F Packing 1
5 Sealing washer 4 19 Delivery flange 1
6 Socket bolt 4 20 Bolt 4
7 O-ring 1 21 O-ring 2
8 Mechanical seal 1 22 Plug 2
9 Adjusting washer 2 23 Name plate 1
10 Impeller 1 24 Packing 2
11 Volute 1 25 Hose coupling 2
12 O-ring 1 26 Hose joint 2
13 Casing 1 27 Hose band 3
14 Bolt 4 28 Strainer 1

Uni-corp Europe S.A.R.L.
Paclite Equipment
ZAC des Petits Carreaux
12 rue des Coquelicots
9 380 Bonneuil Sur Marne
FRANCE
[phone]
sales@paclite
-
equip com
paclite
-
equip com
[phone]