pagertec GIA 32 Bay User manual

GIA 32 Bay
Touchscreen Charging Locker INSTALLATION GUIDE
972
207 207
22
450
401 126 401
450
22
3.Fix 4 x L-Shape Rack on the bottom of
the GIA with 8 x M3 screws.
4. Mark the holes on wall.Drill 4 x Ø6mm
holes on wall according to the Mark.
1. Drill 4 x Ø8mm holes on wall according to
the drawing.Fix 4 x screw studs and 4 x
screws on wall.
2. Leave a 5mm gap off the wall for hanging
the GIA Locker.
Ø8mm
M6 screw
Ø8mm
M6 screw
M6 screw
Ø8mm
M6 screw
Ø8mm
5. Fix 4 x screw studs in holes.
6. Fix 4 x M4 screws to secure the unit in place.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Ø6mm

B. Replace Cable
Replace charging cable 1-8 from left door.
Replace charging cable 9-16 from middle door.
Replace charging cable 17-24 from back door.
Replace charging cable 25-32 from right door.
1. Open the control box door with
key provided.
2. Unlock the door by pressing
the button on the lock.
3.Open the cable clip.
1
1
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
3
4. Unplug USB Cable.
5. Take out the cable
through the hole.
4
5

- Input : AC 100 - 240V / 50~60Hz
- Output (per locker box) : 5V/2.4A Max
- Type C Cable, Lightning Cable, Micro USB Cable
- Proprietary Pin Code Locking System with Audio
Assistant Guide
- Material (Housing) : Cold Rolled Steel
- Dimensions:
W103 x D27 x H69cm
Model No.: PL-GA32-Y2
F. Specifications
C. Emergency
To enter the Administrator Mode,tap the hidden Gear
Icon at the top right corner of the main screen.
Administrative Mode
Enter 4-digit password
Enter 8-digit password
Administrator
1
2
3
4
5
6
7
8
9
0
Default Password:
20180309
Please change it before
implementing the locker.
!
Administrator
Reset Locker Box
Factory Reset
Modify Password
Volume
10.Open the front door by using the key
provided.
D. Reset to factory admin password
Reset to factory
admin password
- To Prevent fire on shock hazard, do not expose the
device to rain or moisture.
- To avoid electric shock,please do not disassemble the
device.
- If trouble occurs,immediately disconnected the device
from wall socket.
Maintenance
- Wipe the device with a soft dry cloth to prevent dust
build up.
- keep the device away from strong volatile solvents or
chemicals, such as thinner, benzene, alcohol, pesticide,
rubber or vinyl plastic etc,which may lead to deterioration
or damage to your devices.
G. Notes on use