Palace Imports 5961 User manual

Thank you for choosing a PALACE IMPORTS product.
Your total satisfaction is our #1 priority.
Customer Service and Warranty Information
·Should you have a problem or need more information concerning the warranty, do
not contact the place of purchase. Please email our customer service
department for immediate assistance at [email protected] or go to
www.palaceimportsinc.com
·PALACE IMPORTS products are warranted to the original purchaser against
defects in material or workmanship in the furniture. Defects as mentioned in this
warranty refer to any imperfections which may impair the use of the product. Our
warranty is expressly limited to the replacement of furniture parts and components
for one year following the date of purchase.
·PALACE IMPORTS will replace any part that is defective. This warranty applies
under conditions of normal use. Our furniture products are not intended for outdoor
use. The warranty does not cover defects caused by improper assembly or
disassembly, defects occurring after purchase due to product modifications,
intentional damage, accident, misuse, exposure to the elements and labor or
assembly costs.
·PALACE IMPORTS reserves the right to request proof of purchase to document a
warranty claim. In no event shall PALACE IMPORTS be liable for incidental or
consequent damages resulting from the misuse of the product.
00 Wood Furniture
00 Wood Furniture
Pantone
102 C

ASSEMBLY INSTRUCTIONS
FAMILY 4-DOOR WARDROBE
SKU 5961 - White
SKU 5962 - Mahogany
SKU 5963 - Mocha
SKU 5964 - Honey Pine
SKU 5966 - Java
PH #2
REV - July/2022 page 2/21
20 ³⁄”
60 ¹⁄”
72”

Made in Brazil
07
08
24
24
26
09
10
13
11
11
06
21
21
15
15 16
12
23
33
20
32
32
17
31
25
25
05
01
03 02
04
3x
page 3/21
PARTS LIST AND LAYOUT
PRE-ASSEMBLY PREPARATION
•Please check the contents before assembling. A full checklist of parts is provided below.
•If any parts are missing or damaged, please contact us at [email protected]
•Assemble on a flat, smooth surface on top of a blanket.
•Use only low-speed power drill setting.
•Assemble as near as possible to the point of use.
•The hardware pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.

SCREWS ARE SHOWN IN ACTUAL SIZE
WARNING:
CHOKING HAZARD
!
- Small Parts-
Not For Children Under 3 years!
FURNITURE TIP-OVER PREVENTION KIT
A8 02+1
3,0x20
F8 02
F9 01
A1 60+3
4,0x30
A42 24+1
4,0x14
A16 12+1
4,0x40
A41 10+1
4,0x30
A44 74+3
3,5x14
C2 62+3
8,0x25
D3 01
450mm - 17 3/4"
450mm - 17 3/4"
G1 52
10x10
H1 10
E17 03
E18 03
D10 06
D16 02
D27 10+1
page 4/21
F10 12
!
FURNITURE TIP-OVER CAN
RESULT IN SERIOUS INJURY OR
DEATH
This wardrobe includes tip-over
prevention hardware that
MUST BE ATTACHED TO THE WALL
per the assembly instructions.
WARNING

C2 C2
24
C2 C2
01)
C2 8,0x25 62
C2
07
08
C2
C2
C2
C2
C2
C2
C2
C2 C2
C2 C2
02
01
13
10
26
C2
C2C2
C2
C2
C2C2
C2C2
C2C2
3x
C2
C2
C2
C2
C2
C2
11
09
C2
C2
C2
C2
C2
C2
17
23
C2
C2
C2
C2
C2
C2
2x
2x
page 5/21

02)
23
23
17
17
08
07
A42
A42
D10
A42
A42
A42
A42
A42
A42
D10
D10
D10
D10
D10
D10
D10 06A42 4,0x14 12
TURN PART 23
OVER
TURN PART 17
OVER
A42
A42
A42
A42
A42
A42
page 6/21

08
03)
A44
A44
D3
12
A44
A44
D3
A44 3,5x14 02 D3 01
04)
A1 4,0x30 07
A1
24
13
11
A1
A1
A1
A1
A1
A1
!
08
page 7/21

A1 4,0x30 05
05)
06)
A1 4,0x30 06
A1
08
08
A1
A1
A1
A1
A1
23
23
24
09
13
13
26
10
A1
A1
A1
A1
11
A1
A1
A1
page 8/21

A1 4,0x30 06
A1 4,0x30 05
07)
08)
13
13
A1
A1
A1
A1
A1
A1
10
11
09
26
17
17
23
23
08
08
A1
A1A1
24
A1
A1
A1
page 9/21

A1 4,0x30 07
09)
10)
13
!
07
A1
17
23
08
A1
A1
A1
A1A1
08
!
A16
12
07
A16
A16
A16
A16
A16
A16 4,0x40 12
A44 3,5x14 04
D16 02
23
A44
A44
D16
07
24
11
A1
A16
A44
A44 A44
D16
D16
23
17
07
page 10/21
12

11)
!
G1
21 st
1
G1
G1
G1
21
15
15
!
nd
2
G1 G1 G1G1
G1
G1
G1
G1
G1
G1
G1
G1
G1
G1G1G1G1
G1
G1
G1
D27
G1
D27
G1
D27
G1 D27
G1
D27
G1
21
15
G1
D27
D27 10 G1 10x10 52
21
G1
G1G1
G1G1
G1
G1
G1G1
G1 G1 G1G1 G1
G1
G1
G1
G1
G1
G1
G1
G1
D27
G1
D27
G1
D27
G1 D27
G1
D27
G1
page 11/21

12)
13)
A44 3,5x14 16
16
15
15
A44
21
15
15
A44
16
A44
A44
A44
4"
4"
4"
33 ¹⁄"
!
!
21
A44
A44
A44
A44
A44
A44
A44
4’’ A44
06
25
4"
A44
A44
A44
A44
A44
A44
21
!
To install D10 in the bottom
position, please use these steps:
nd
2
st
1
25
25
page 12/21
A44

14)
15)
Attach hinge ( F10 ) to hinge plate if it comes separated.
Push hinge against plate until it clicks.
click!
F10
A44 3,5x14 24 F10 12
A44
A44
F10
A44
A44
A44
A44
A44
A44
F10
F10
F10
A44
A44
A44
A44
A44
A44
F10
F10
F10
A44
A44
A44
A44
A44
A44
F10
F10
F10
A44
A44
A44
A44
A44
A44
F10
F10
F10 !
page 13/21

16)
17)
page 14/21
A44 3,5x14 06
A44 3,5x14 06
33
A44
A44
33
31
A44
A44
31
A44
A44
A44
A44
A44
A44
A44

18)
19)
page 15/21
A44 3,5x14 06
A44 3,5x14 06
A44
A44
32
32
A44
A44
32
A44
32
A44
A44
A44
A44
A44
A44

20)
21)
H1 02
A41 4,0x30 02
32 A41
H1
A41
A41
H1
H1 02
A41 4,0x30 02
32
33
A44
A44
A44
A44
32
20
H1
A41
H1
A41
H1
A41
H1
31
32 20
A44
page 16/21
A44 3,5x14 04

22)
page 17/21
1. 2. 3.
2.
3.2.1.
1. 2. 3.
1.

23)
H1 06
A41 4,0x30 06
A1
02
01
05
04
03
A1 4,0x30 24
A1 A1
A1
A1
05
02
01 04
A1
A1 A1
A41
H1
A41
H1
A41
H1
05
05
3x
page 18/21

24)
05
A42 12
4,0x14
Flip the assembled drawer
UPSIDE DOWN to install glides
E17
E18
A42
A42
A42
A42
E17 450mm - 17 ³⁄" 03
Drawer RIGHT E18 03
450mm - 17 ³⁄"
Drawer LEFT
E18
A42
A42
A42
A42
E17
3x
page 19/21

25)
Label Required By Federal Law.
DO NOT REMOVE!
!
page 20/21