Palace Imports METRO 7101D User manual

Thank you for choosing a PALACE IMPORTS product.
Your total satisfaction is our #1 priority.
Customer Service and Warranty Information
·Should you have a problem or need more information concerning the warranty, do
not contact the place of purchase. Please email our customer service
department for immediate assistance at [email protected] or go to
www.palaceimportsinc.com
·PALACE IMPORTS products are warranted to the original purchaser against
defects in material or workmanship in the furniture. Defects as mentioned in this
warranty refer to any imperfections which may impair the use of the product. Our
warranty is expressly limited to the replacement of furniture parts and components
for one year following the date of purchase.
·PALACE IMPORTS will replace any part that is defective. This warranty applies
under conditions of normal use. Our furniture products are not intended for outdoor
use. The warranty does not cover defects caused by improper assembly or
disassembly, defects occurring after purchase due to product modifications,
intentional damage, accident, misuse, exposure to the elements and labor or
assembly costs.
·PALACE IMPORTS reserves the right to request proof of purchase to document a
warranty claim. In no event shall PALACE IMPORTS be liable for incidental or
consequent damages resulting from the misuse of the product.
00 Wood Furniture
00 Wood Furniture
Pantone
102 C

ASSEMBLY GUIDE
METRO 2-DOOR WARDROBE
PH #2
REV - 05/2022 page 2/19
SKU 7101D / 7101M - White
SKU 7103D / 7103M - Mocha
SKU 7105D / 7105M - Gray
SKU 7106D / 7106M - Java
SKU 7107D / 7107M - Black
Raised Panel Doors
Mirrored Door
20 ³⁄”
37 ³⁄”
72”

Made in Brazil
20
15
16 07
23
08
06
06
12
24
24
17
17
11
10
11
13
03
01
02
05
04
3x
page 3/19
PRE-ASSEMBLY PREPARATION
• Please check the contents before assembling. A full checklist of parts is provided below.
• If any parts are missing or damaged, please contact us at [email protected]
• Assemble on a flat, smooth surface on top of a blanke
• Use only low-speed power drill setting
• Assemble as near as possible to the point of use
• The hardware pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN
PARTS DIAGRAM
31 32
35 32

SCREWS ARE SHOWN IN ACTUAL SIZE
FURNITURE ANTI-TIP KIT
A8 02+1
3,0x20
F8 02
F9 01
A1 46+2
4,0x30
A42 20+1
4,0x14
A16 09+1
4,0x40
A25 10+1
M4x25
A44 30+1
3,5x14
C2 49+2
8,0x25
D4 08+1
450mm - 17 3/4"
450mm - 17 3/4"
G1 52
10x10
H12 05
E17 03
E18 03
D10 04
D16 01
D27 08+1
F10 06
page 4/19
FURNITURE TIPOVER CAN RESULT
IN SERIOUS INJURY OR DEATH
This wardrobe includes tipover-
prevention hardware that
MUST BE ATTACHED TO THE WALL
per the assembly instructions.
!WARNING:
WARNING:
CHOKING HAZARD
!
Small Parts.
Adult Supervision Required.
Not for children under 3 years old.

24
01)
C2 8,0x25 49
C2
13
10
C2 C2
C2 C2
02
01
3x
23
C2
C2
C2
08
C2
C2
C2
07
C2
C2
C2
11
C2
C2
C2
C2
C2
C2
2x
C2C2
C2C2
C2C2
C2C2
C2C2
C2C2
2x
page 5/19

Turn part 23
OVER
02)
07
A42
A42
D10
D10
D10 04A42 4,0x14 08
08
A42
D10
A42
A42
D10
A42
23
23
A42
A42
A42
A42
D10
page 6/19

08
03)
04)
A1 4,0x30 04
A1 4,0x30 06
24
13
11
A1
A1
A1
A1
A1
!
08
A1
08
13
A1
23
24
A1
A1
A1
A1
page 7/19

A1 4,0x30 05
05)
06)
A1 4,0x30 07
A1
08
08
23
23
A1
A1
A1
A1
A1
A1
A1
24
13
10
11
A1
A1
07
24
11
10
13
A1A1
A1
!
07
page 8/19

D16 01
07)
08
!
A16
A16
A16
A16
A16 4,0x40 09
A44 3,5x14 02
A44
D16
23
12
07
A16
A16
A44
12
07
page 9/19
23
A44
A44
D16

08)
!
G1
20 st
1
G1
G1
G1
15
20
!
nd
2
G1 G1 G1G1
G1 G1
G1
G1
G1
G1
G1
G1 G1 G1
G1
G1
D27
G1
15
20
G1
D27
D27 05 G1 10x10 44
G1
G1
G1
G1
G1
G1
G1
G1
G1
G1
G1
G1
G1
D27
G1
G1
G1
G1
G1
G1
G1
G1
G1
G1
G1
D27
G1 D27
G1 D27
G1
page 10/19

09)
10)
4"
34 ¹⁄"
A44
15
15
16
G1
D27
D27
G1
D27
G1
D27
G1
G1
G1
G1
G1 G1
A44
4"
A44
A44
20
16
16
06
D4 08
06
17
17
D4
!
06
A44 3,5x14 04
D27 03
G1 10x10 08
page 11/19
!
15
A44
4’’ A44
Choose the desired shelf
position and insert metal pegs.

11)
12)
Attach hinge ( F10 ) to hinge plate if it comes separated.
Push hinge against plate until it clicks.
click!
F10
A44 3,5x14 12 F10 06
A44
A44
F10
!
A44
A44
A44
A44
A44
A44
F10
F10
F10
A44
A44
A44
A44
A44
A44
F10
F10
F10
page 12/19

13)
14) Mirrored Door
A44 3,5x14 06
32
31
A44
A44
A44
A44
A44
A44
A44
page 13/19
A44 3,5x14 06
A44
A44
32
A44
A44
31
It might be necessary to adjust the hinges
(F10) before hanging the doors
!
It might be necessary to adjust the hinges
(F10) before hanging the doors
!

14) Raised Panel Door
H12 02A25 M4x25 04
H12
A25
A25
15
A44 3,5x14 06
35
A44
A44
A44
31
It might be necessary to adjust the hinges
(F10) before hanging the doors
!
A25
A25
H12
page 14/19
H12
A25
A25
H12
A25
A25

16)
1. 2. 3.
2.
3.2.1.
1. 2. 3.
1.
page 15/19

17)
A1
02
01
05
04
03
A1 4,0x30 24
A1 A1
A1
A1
05
02
01 04
A1
A1 A1
A25
H12
A25
H12
05
05
3x
A25
A25
H12 03
A25 M4x25 06
page 16/19

18)
05
A42 12
4,0x14
Turn the assembled drawer
UPSIDE DOWN to install glides
E17
E18
A42
A42
A42
A42
E17 450mm - 17 ³⁄" 03
Drawer RIGHT E18 03
450mm - 17 ³⁄"
Drawer LEFT
3x
E18
A42
A42
A42
A42
E17
page 17/19

19)
Place the labeled drawer at the top
!
page 18/19

20)
Attach to wardrobe
A8
A8
F8
F8
Anchors and screws not included.
Screw into drywall
F9
DRYWALLDRYWALL
Install both parts F8
Tether and tighten
F8
F9 01
F8 02
A8 3,0x20 02
page 19/19
FURNITURE TIPOVER PREVENTION KIT INSTALLATION