
Mobile 34/35m Operating Instructions
m
/
45
33 operating and maintenance instructions
CONVERTIBLE BENCH/TABLE
TO CLOSE THE TABLE FOR STORAGE POSITION
STEP 1
Return tabletop and bench to
Auditorium Seating position.
STEP 2
Grasp the center of the bench.
Rotate bench up until bench
folds flat against the seat back
and center legs are flat against
the bottom of the bench.
STEP 3
Make sure casters are unlocked.
Push from the end of the table to
your storage destination.
Customer Service 800-788-1028
As part of Palmer Hamilton’s on-going commitment to quality, product specifications, changes, or modifications may be made without prior notice. Warranty: PALMER HAMILTON warrants that its products
shall be free from defects in original material and workmanship for a period of fifteen years from the original shipment date. This warranty shall not apply to normal wear and tear or in the event products are
damaged as a result of misuse, abuse, vandalism, neglect, accident, improper application, and modification or repair by persons not authorized by PALMER HAMILTON. The company will, at its discretion,
repair or replace any defects. Any repair or replacement must be approved in advance by the factory before any action is taken. There are no implied warranties of fitness or merchantability, and there
are no other express warranties beyond the warranties expressed here. 10/2010
Palmer Hamilton #70695 Mobile 34/35m Operating Instructions
In-use
Position
Stored
Position
TO CONNECT TWO TABLES FOR CAFETERIA SEATING FROM CLASSROOM SEATING POSITION
STEP 1
Arrange Cafeteria Seating as
desired - be sure to place tabletops
touching each other. Review the
Classroom Seating steps for each
table.
STEP 2
An optional Table Latch can
be purchased, located underneath
the tabletops. Move to the
In-use Position.
STEP 3
Lock casters. Cafeteria Seating is
ready for use.