Palmperfect 3881i User manual

Thank you for purchasing the PALMPERFECT®Bikini Trimmer. To ensure you have the best
possible experience with this product, please read all instructions and precautions carefully before use.
®
model 3881i
OWNER’S MANUAL
version 22.04.26
Bikini Trimmer
Fig. 1 Fig. 2
WARNING
PRODUCT FEATURES
PRODUCT FEATURES
This device is not a toy and is not intended for
use by or on children. This device is intended
for household use only. Do not use the device if
it has a damaged blade or cutting unit, as injury
may occur. Do not expose the device to direct
sunlight, extreme temperatures or heated
surfaces. This device is water resistant to IPX4
standards. It can be exposed to splashing water
in the shower, and can be rinsed clean under
the faucet. The device should not be
completely submerged in water.
1. Dual Blades
2. Blade turn release
3. Battery port turn release
4. On/off button
Dual Blades
1
Blade Turn Release
2
Battery Turn
Release
3
On/Off Button
4
The trimmer requires two (2) AAA 1.5 volt batteries for operation (not included). Do not use old or
damaged batteries.
Note: The device will not operate if the
batteries are improperly installed. Replace the
battery as soon as you notice the device is
running slower than normal.
Battery installation / replacement:
1. Unlock the battery compartment by twisting
the handle to the left until the arrows line up
and then pulling the cover away from the
trimmer (Fig. 1).
2. Insert two (2) AAA batteries into the battery
compartment according to the polarity
markings (+ / - ) indicated within the
compartment. The batteries should fit snugly
into place.
3. Replace the battery compartment cover by
lining up the arrows and twisting to the right
(Fig. 2).

Fig. 3 Fig. 4
Fig. 5
Fig. 6
C
A
U
T
I
O
N
:
D
o
N
O
T
g
r
i
p
t
r
i
m
m
i
n
g
h
e
a
d
b
y
t
h
e
b
l
a
d
e
s
.
HOW TO USE
CLEANING
Three trimming guides are included for
trimming hair to a longer length. To install a
guide, position open end of the guide over the
larger blade and apply gentle pressure until it
snaps into place (Fig. 3). To remove a guide, use
the tab on the side of the guide and gently lift
on one side (Fig. 4). Only install the guides with
the trimmer turned off.
Note: Trimming guide is only intended for use
with the larger blade. It will not fit in place over
the smaller blade.
Power the device ON by pressing button on
bottom of the device. Power the device OFF by
pressing button on the bottom of the device a
second time. Only operate the device with the
trimmer head securely connected. Use larger
blade for thicker hair or trimming with guides,
use smaller blade for removing finer hair (Fig. 5).
Always clean the device with the power turned
OFF. You can expose the device to running
water for cleaning, but it should never be
completely submerged. Wipe with a clean, dry
cloth after rinsing.
The trimming head can be removed to further
clean the device. To remove the trimming head,
carefully grip the sides of the trimming head,
twist to the left and lift away from the device.
To attach the trimming head, line up markings
on the head and body of device and twist to
the right (Fig. 6).
The Bikini Trimmer carries a warranty against
manufacturing defects (excluding cutting
blades) for two years from the date of original
purchase. Beacon Wellness Brands will, at our
option and upon submission of a valid proof of
purchase within the warranty period, repair or
replace the shaver free of charge. For assistance
or for issues related to performance, damages,
blade replacement, warranty, regular
maintenance or customer feedback, please
contact us Toll Free at [phone], Monday
- Friday from 8:30AM until 5:30PM EST.
CONTACT / WARRANTY / SUPPORT
© 2022 Beacon Wellness Brands, Inc.
Beacon Wellness Brands
85 Wells Ave | Suite 106 | Newton, MA 02459 USA