Panadero HOGAR F-820-S Programming manual

INSTRUCCIONES DE INSTALACION, UTILIZACIÓN Y DE MANTENIMIENTO
INSERT
CASSETTES
INSERT
INSERT
Mod.
USAGE AND MAINTENANCE INSTRUCTIONS
........................................ p. 4
INSTRUCTIONS D’UTILISATION ET D’ENTRETIEN........................................
INSTRUCCIONES DE UTILIZACIÓN Y DE MANTENIMIENTO
.................................... p. 14
GEBRUIKS- EN ONDERHOUDSAANWIJZINGEN
......................................... p. 19
•
p. 9
.........................................................
p. 24
INSERTO
INSTALLATION
.........................................
p. 30
I S T R U Z I O N I D ’ U S O E M A N U T E N Z I O N E
HOGAR F-820-S

Abono / Assen - Kunstmest
Nutrients/Eléments nutritifs/ Nutrientes/Voedingsstoffen Ashes - Fertilizer / Cendres – Engrais / Cenizas –
2
Wood: an ecological fuel
Wood is a renewable source of energy which answers the
energy and environmental demands of the 21st century.
Throughout its long life, a tree grows from sunlight, water,
mineral salts and CO2. Following the general pattern of
nature, it soaks up energy from the sun and supplies us with
the oxygen essential for animal life.
The quantity of CO2 given off during the combustion
of wood is no greater than that given off by its natural
decomposition. This means we have a source of energy that
respects the natural cycle of millions of years. Burning wood
does not increase the CO2 in the atmosphere, making it
an ecological source of energy which plays no part in the
greenhouse effect.
In our wood-burning stoves logs are burnt cleanly without
leaving any residue. Wood ash is a high quality fertilizer,
rich in mineral salts.
In buying a wood-burning stove, you will help the
environment, your heating will be very economical and you
will be able to enjoy watching the flames, something no
other form of heating can offer.
Le bois: une énergie écologique
Le bois est une énergie renouvelable qui répond aux défis
énergétiques et environnementaux du 21ème siècle.
Tout au long de sa vie, un arbre pousse grâce à la lumière
du soleil, l’eau, les sels minéraux et le CO2. Il accumule de
manière naturelle l’énergie solaire et nous offre l’oxygène
indispensable à la vie.
La quantité de CO2 qui se dégage pendant la combustion
du bois n’est pas supérieure à celle qui serait émise lors
de sa décomposition naturelle. Nous sommes donc devant
un type d’énergie qui respecte le cycle naturel de millions
d’années. La combustion du bois n’augmente pas le CO2
dans l’environnement, c’est une énergie écologique qui ne
participe pas à l’effet de serre.
Avec nos poêles, le bois se brûle proprement et ne laisse
aucun résidu. La cendre du bois représente un engrais de
haute qualité, riche en sels minéraux.
En achetant un poêle à bois, vous aidez l’environnement,
vous aurez un chauffage économique et vous pourrez
apprécier ce spectacle des flammes qu’aucun autre type de
chauffage peut offrir.

afvalstoffen gestookt. Houtas is mest van hoge kwaliteit en
energie- en milieu-eisen van de 21
3
La leña: una energía ecológica
La leña es una energía renovable que responde a los
retos energéticos y medioambientales del siglo XXI.
A lo largo de su vida, un árbol crece gracias a la luz
solar, el agua, las sales minerales y el CO2. Acumula
de forma natural la energía del sol y nos da el oxígeno
indispensable para la vida.
La cantidad de CO2 que se desprende durante la
combustión de la leña no es superior a la que se emitiría
por su descomposición natural. Por lo tanto estamos ante un
tipo de energía que respeta el ciclo natural de millones de
años. La combustión de la leña no aumenta el CO2 en el
medioambiente, por lo que es una energía ecológica que no
participa del efecto invernadero.
En nuestras estufas, la leña se quema limpiamente y
no deja residuos. La ceniza de leña es una abono de alta
calidad, rico en sales minerales. Al comprar una estufa de
leña, usted está ayudando al medioambiente, tendrá una
calefacción económica, y disfrutará de ese espectáculo de la
llamas que ningún otro tipo de calefacción puede ofrecer.
Brandhout: milieuvriendelijke energie
Brandhout is een vervangbare energie die voldoet aan de
ste eeuw.
In de loop van zijn leven groeit een boom dankzij
zonnelicht, water, mineraalzouten en CO2. Hij verzamelt op
natuurlijke wijze de zonne-energie en geeft ons de zuurstof
die nodig is om te leven.
De hoeveelheid CO2 die tijdens het stoken van hout
wordt uitgestoten is niet groter dan die vrijkomt door
natuurlijke ontbinding. Daarom hebben we te maken met een
energiesoort die de natuurlijke cyclus van miljoenen jaren
respecteert. De verbranding van hout verhoogt de CO2-
emissie in het milieu niet, waardoor het een milieuvriendelijke
energie is die niet bijdraagt aan het broeikaseffect.
In onze kachels wordt het brandhout schoon en zonder
rijk aan mineraalzouten. Door een houtkachel te kopen helpt
u het milieu, heeft u een goedkope verwarming en geniet
u van de gezellige vlammen die geen andere verwarming
u kan bieden.
Mod.
Il legno: un’energia ecologica
Il legno è una fonte d’energia rinnovabile che offre una
soluzione alle sfide energetiche e ambientali del XXI secolo.
Un albero cresce grazie alla luce del sole, all’acqua, ai sali
minerali e alla CO2. Accumula in modo naturale l’energia del
sole e ci fornisce l’ossigeno indispensabile alla vita.
La quantità di CO2 che si produce durante la combustione
del legno non è superiore a quella che libererebbe per
scomposizione naturale. Pertanto ci troviamo in presenza di
un tipo di energia che rispetta il ciclo naturale di milioni di
anni. La combustione del legno non aumenta il livello di CO2
presente nell’ambiente, quindi si tratta di una fonte d’energia
ecologica che non contribuisce all’effetto serra.
Nelle nostre stufe, la legna brucia in modo pulito e non
lascia residui. La cenere del legno è un fertilizzante d’elevata
qualità, ricco di sali minerali. Quando compra una stufa a
legna, dà una mano all’ambiente, ottiene un riscaldamento
economico, e può godere dello spettacolo delle fiamme che
nessun altro tipo di riscaldamento le può offrire.
F820S

- In the smoke outlet is via tubing only, at least three meters of vertical tubing are recommended.
commended that the pipes should reach the exterior exit.
duces the smoke to return into the fireplace. In case the chimney pipe is too big it' s re-
size should not be too big because this would cause the smoke to get too cold which pro-
Connect the first pipe of the smoke outlet to the insert with a minimum 40 mm overlap.
surrounding it must be of noncombustible material and/or be well insulated.
- The insert has to be installed at a site that supports its heavy weight and everything
- It is recommended to put a "hat on the last tube in case it reaches the exterior of your home.
- Install the tube connections carefully, the connections should be sealed with a refractory
to be complied with when installing the insert.
least one window that can be opened in the room where the insert will be installed.
- This insert must be installed in a well ventilated area. We recommend you have at
distance of 60cm.
heat like furniture, draperies, paper, clothing,... You should keep a minimum safety
- While the insert is functioning keep anything away from it that could be damaged by
- You must foresee accessibility for the cleaning of the insert, flue and chimney.
PLACEMENT
- If the installation is connected to a masonry chimney pipe we recommend that its internal
of joints, angles and deviations that could cause a malfunction of the insert.
putty to prevent soot from falling through the joints, until you reach the exterior exit.
- The insert may not be installed into a chimney system shared with other appliances.
SMOKE PIPE
All local regulations, including those referring to National and European standards, need
which exit the insert through a grill at the front.
and by ways of leaving a small area around the fireplace warm air streams are created
ted by recuperating the warmth generated on the outer walls of the combustion chamber
the vitroceramic glass and second by convection warmth. The convection warmth is genera-
The insert transmits warmth twofold: first by radiation warmth through the big surface of
woodstoves require an installation strictly in accordance with present legislation. Our
follow the usage and maintenance instructions.
For this reason, before installing our product you must read this manual carefully and
out.
you to know how to correctly use your woodstove following the recommendations we set
products comply to the EN 13229 European norm, however it is very important for
4
USAGE AND MAINTENANCE INSTRUCTIONS
You have purchased a PANADERO product. Apart from correct maintenance, our
INSTALLATION
- The installation of the smoke outlet must be as vertical as possible, avoiding the use
IMPORTANT: The installation of this insert has to be done by a qualified professional.
You have purchased a wood burning stove with a vermiculite insulated combustion chamber.
Do not remove the vermiculite boards!!!!!

space to prevent the the creation of fissures in the upper wall due to expansion of the metal.
small sticks of wood. Once the fire starts to burn, add two logs of wood each
- Before installing the insert it 's recommended to take out all its loose interior parts
convection. To do so leave a minimum spacing of 50 mm around the fireplace to create
INSTALLATION
- The masonry must not touch the upper part of the fireplace, allow a minimum of 5mm.
to embed the fireplace from the bottom upwards.
- Once positioned, perform a functional test before final embedment. It ' s recommended
the next charge but no stronger.
previous charge has been burnt, leaving only a basic fire bed which is enough to light
one hour. In any instance a charge of fuel must not be added to the device until the
- It is normal for smoke to appear during the first few uses of the insert, as certain
to avoid breakage, and once placed at its final site reinstall all the interior parts.
the convection chamber.
place, isolating all areas close (to improve the sealing), in order to exploit the heat of
- It is recommended to install a vent in the area between the roof and the top of the fire-
outside, with a size of at least 200 cm
- The lower part of the insert needs to have a direct air entrance, from the inside or
device must be kept completely open. Once the fire is more intense, close the door
- For the lighting process of the device it is recommended you use paper, fire lighters or
of wood (roughly two logs weighing 1 Kg. each) must be placed inside at intervals of
- In order to achieve the stated nominal heat output of this device a total quantity of 1.7Kg.
- The device is not designed to function with the door open under any circunstances.
components of the heat-resistant paint burn whilst the pigment of the actual device is
- The device is intended to function intermitently with intervals for recharging the fuel.
the device, glass and smoke outlet.
air inlets.
completely (if open) and regulate the intensity of the fire by closing and opening the
5
FUEL
- Use only dry wood with a maximum moisture content of 20%. Wood with a moisture
content higher than 50 or 60% does not heat and combusts very badly, and creates
a lot of tar, releases excessive amounts of vapour and deposits excess sediments onto
- The fire should be lit using special fire lighters, or paper and small pieces of wood.
Never try to light the fire using alcohol or similar products.
- Do not burn domestic rubbish, plastic materials or greasy products that can pollute
the environment and lead to risks of fire due to obstruction of the pipes.
FUNCTION
fixed. Therefore the room should be aired until the smoke disappears.
weighing 1 to 1’3 Kg. as a first initial charge. In this lighting process the air inlets of the
2
Mod.
can function without this seal, it is recommended that you replace it seasonally.
- It is normal for the seal of the glass door panel to melt with use. Even though the device
-When adding insert or when taking out the ash pan, some of the ashes may fall on the
exterior of the stove. Please turn the switch to 0 or I before opening the door, as to avoid
F820S

repair work, however any transport costs have to be paid by the client.
In the interior of the packaging, you will find a quality control slip. We request that
This is a high quality fireplace, manufactured with great care. Even so, if any defect is
- At the start of every season a professional should clean your installation.
- Never clean the device while it is in use.
turer.
- In case the device does not work properly, close the air inlets and contact the manufac-
- In case of the fireplace becoming too hot, close the air draughts to reduce the intensity
of the fire.
or scrunched up paper which is easier to light.
- If you have trouble lighting the device (due to cold weather, etc.) it can be lit with folded
with the stove.
expose yourself to risks of burns. When handling metal pieces, use the glove provided
- The glass, handles and cassette in general may reach very high temperatures. Do not
put in the appropriate fuel.
open it without opening the air draught beforehand. Open the door only in order to
- Dop not open the door abruptly in order to avoid smoke being released, and never
the ash which may still be hot up to 24 hours after the device has been used.
waiting for it to fill up too much, to avoid the grill becoming damaged. Take care with
- The lower drawer can be removed in order to clear out ash. Empty it regularly without
will contact us and send us the device if necessary. Our company will replace any faulty
- Keep children away from the device.
6
MAINTENANCE
- It is advisable to clean the glass door panel periodically to avoid blackening by soot
deposits. Professional cleaning products are available for this. Never use water.
- It is also important to clean the smoke outlet tubing periodically and check there are
no blockages before relighting fuel after a long period of non-use. At the start of each
season a professional should carry out a revision of the installation.
- In the event of a fire in the smoke outlet, close all air draughts if possible and contact
the authorities immediately.
- Any replacement part which you may need must be recommended by us.
GUARANTEE
found please first contact your distributor. If they are unable to solve the problem they
parts free of charge up to five years from the date of purchase. We will not charge for
you send this to your distributor in case of any claim.
-Glass
-Internal grate
Since this apparatus has been tested by a homologated laboratory the following parts are
NOT covered by warranty: -Vermiculite
-Door handle, air-inlet knobs, etc.
- The fiberglass cord used for the joints may degrade over time. If this happens, you will
have to replace it with a new fiberglass tape.
the fan from taking in the ashes and blowing them through the stove. Once the door is closed,
you can turn the switch to any position you want.

8
MEASUREMENTS AND CHARACTERISTICS
- Height........................................................ 629 mm
- Width....................................................... 770 mm
- Depth......................................................... 548 mm
- Weight........................................................ 96 Kg
- Firewood entrance......... 600 x 300 mm
- Smoke outlet ........................................ 150 mm
- Iron sheet body of 3+1.5 mm.
- Cast iron grill
- Paint, resistant up to 800 °C
- Vitro-ceramic glass, 750 °C
- Firewood up to 60 cm long
- Nominal heat output...................... 7 kW
- Energy efficiency............................... 80.8 %
- CO emission......................................... 0.09 %
- Minimum flue draught for
nominal heat output...........................
12.2 Pa
- Flue gas mass flow..........................
5.81 g/s
- Flue gas temperature........................ 264 °C
- Heating volume (aprox.)............. 250 m3
Thermal output ......................................................................
Energy efficiency............................................................
Emission of CO in combustion products
Flue gas temperature.......................................................
Fuel types
...............
Firewood and briquetted wood
CASSETTE “C-820-S”
.............................
17
CERTIFICATE Nº TD 4637; TD 4637P
P.I. CAMPOLLANO
AVENIDA 5ª, 13-15
02007 ALBACETE -SPAIN
DECLARATION OF PERFORMANCE...................19085
NOTIFIED BODY................................................1677
EN 13229: 2001 & A2: 2004
264°C
7 kW
80.8 %
0.09 %
.
Dust concentration at 13% O2 29.7 mg/Nm
FREESTANDING ROOMHEATER FIRED BY SOLID FUEL
3

29

P03133
P.I. CAMPOLLANO
AVENIDA 5ª, 13-15
02007 ALBACETE - SPAIN
Telf.: ([phone]
Fax: [phone]
[email protected]