Panarex Electronics Linkbox N-1000 User manual

User’s Guide
Panarex Electronics, Sun Valley, CA. USA
N-1000
剦#2007 Panarex Electronics

Before using the product
Introduction
Welcome.
is a set-top box that allows you to enjoy your own home entertain-
ment contents from a remote location using the internet
Take – Out the home contents
With the , your home A/V media content is available to you from any
location with internet access. This feature is known as “ Take-Out “. This feature
allows you to enjoy you’re A/V devices through any PC or labtop just as you
would from your very own home
Home view
In addition to the “ Take-Out “ feature, allows you to monitor your
home remotely by connecting a web-camera ( optional accessory ) to your
. Using this feature, you may monitor your home using any PC or
labtop connected to the internet

Before using the product
Accessories
2
Installation CD
A/V Cable
IR Contorl Cable
LAN Cable
DC Adaptor (5V, 2A)
Instruction manual

LAN
EXT.IR
VIDEO
CAMERA
- AUDIO -
A /V IN
DC 5V
POWER
OFF
ON
A /V OUT
L R
VIDEO - AUDIO -
L R
Front and Rear views of the
Front
Rear Panel
3
Power Indicator : When the power cord is connected to the outlet and the
switch is turned on,
Green LED in front will blink in order and remain on while active
* Description of LED lighting
1 blink indicates that the system is initializing
2 blinks indicate that the system is checking the connection between the and the Router
3 blinks indicate that the system is checking the connection between the and the Server
LED will remain on when the system is on standby for connection
A/V Output :Composite video output socket (Yellow) and Stereo audio output
socket (Red/ White) to TV
Camera input : Web camera input port for home view
A/V Input : Composite video input socket (Yellow) and Stereo audio input socket
(Red/ White) from the external A/V devices
IR connector : port for the IR control cable
LAN port : Ethernet port to Router for internet
Power On/Off Switch
7. Power Supply : Adaptor type. AC 100 - 240V, 50/60Hz ( 5V DC, 2.8A )
1
1
1
2
3
4
5
6
7
1 2 3 4 5 6 7

LAN
EXT.IR DC 5V
POWER
OFF
ON
LAN
EXT.IR
VIDEO - AUDIO -
A /V IN
DC 5V
POWER
OFF
ON
L R
Connecting
Connecting the remote control IR Cable and A/V Cable
4
1. Connect A/V out of an external A/V device and A/V input of the with
an Audio/Video cable
2. Insert the remote control IR cable into the IR connector on the
3. Place the head of remote control IR cable against the IR sensor of the external
A/V device
N
ot
i
ce
The remote control IR cable allows you to control your device’s channels and menu remotel
y
Rear panel of External device
S-
ANT IN
VIDEO OUT
AUDIO OUT AUDIO OUT
COMPONENT
COAXIAL
DVI OUT
IR Blaster Installation
Front panel of the external A/V device

LAN
EXT.IR
VIDEO
CAMERA
- AUDIO -
A /V IN
DC 5V
POWER
OFF
ON
A /V OUT
L R
VIDEO - AUDIO -
L R
Connecting
Network Connection of
5
Plug one end of the Ethernet cable into LAN port of the and connect
the other end to a port of your Router
requires a connection to the Internet in order to provide the services
such as Take- Out and Home View
N
ot
i
ce
A Router that allows UPnP is strongly recommended to automatic setup of the remote
viewing.
DSL Modem
Router

LAN
EXT.IR
VIDEO
CAMERA
- AUDIO -
A /V IN
DC 5V
POWER
OFF
ON
A /V OUT
L R
VIDEO - AUDIO -
L R
LAN
EXT.IR
VIDEO
CAMERA
- AUDIO -
A /V IN
DC 5V
POWER
OFF
ON
A /V OUT
L R
VIDEO - AUDIO -
L R
Connecting
Powering-up the
Connecting Link Cam
6
Plug LinkCam into the camera port of the . You may adjust the
definition of the camera by turning the frame of the camera lens
Connect the power adaptor into the and plug it into an electrical outlet.
Turn ON the power switch at the rear panel of the . Then the LED light
should turn on and blink a few times while checking the connection with the
router.
T
i
p
:
If the LED light does not turn on after powering up, check the connection to the
r
ou
t
er
Not
i
ce
Link Cam is an optional accessory .
Link Cam supports a resolution of 320 x 240 / 30 frames
py
py
DC 5V
POWER
OFF
ON
1
12
2

Connecting
A connection diagram of all the connection of the
7
Connect the TV, External device, router and the as shown in the
below picture
TV
Router
External Device

Linker
Introduction
8
Linker is the PC software that allows the user to view the media
contents of an external device connected to the via the internet
Main features of Linker
(1) Take Out TV
With Linker installed, any remote PC or labtop may be used to access live channel
and media services of the external device
(2) Home View ( optional feature )
The user can monitor their home through video streaming from Link Cam
connected to the
Minimum System and Network Requirements
Windows 2000 / Windows XP / Windows Vista operating systems
Pentium 4 over 1GHz processor speed
256MB or above memory
100MB or above free hard disk space
Sound card ( 16-bit )
Graphics Card ( 24-bit color )
Cable or DSL modem
256 Kbps upstream network speed
Home network router ( UPnP compatibility highly recommended )

Installation
Linker Installation
9
Select your language preference and
click “ OK “.
Language selection
1
Click “ Next “ to continue
Starting Setup
2
Read over the End user License Agree-
ment and click “ I agree“ to continue
License Agreement
3

Installation
1
0
Select the destination folder and click “
Install “ to continue
Installation Location selection
4
Click “ Next “ to activate the Setup Wizard
Installation processing
5

Installation
Setup Wizard
11
Click “ I want to begin register my
“ in the radio button and click “ Next “ to
continue
Setup Wizard is a useful program for the user to setup the and
change the network information. This program can only be used in the local
network
Starting the Setup Wizard
1
Entered the registration number and click
“ Find ” to get the network
information from the router
Entering the registration number
2
Click “ Next “ to continue In the event that
the network information of the
is not found, please refer to the Help
Finding the network information
3
T
i
p
:
The registration number is the 12 digits of
c
o
m
b
in
a
ti
o
n
of
l
etters
a
n
d
n
u
m
b
ers
gg
g
f
ound on the bottom of your

Installation
For product registration, enter User ID,
Password and admin Password. Once you
have entered your information, click “
Register“ to continue
Registration
4
setting for remote connection
5
Click ‘ Next ‘ to continue .
Click “ Check if available”to check
the availability for the remote connection.
If the remote connection is available, click
to complete the Setup Wizard.
In the event that the network does not allow
the remote connection, please click the “
Help” button
Checking the remote connection
6
Click “ finish “ to complete
the installation
Click “ End “ to complete the Setup
Wizard
Completion
7
T
i
p
:
T
h
e a
d
min Passwor
d
wi
ll
b
e use
d
w
h
en you c
h
ange t
h
e
settin
g
and
fi
rmware update via Setup Wizard. In addition,
Admin Password can be used when
y
ou want to stop the
streaming to the third person. In the case that
y
ou forget the
Admin Password, you should reset the . After the
reset, The gets into the factory default, and you
c
an re
g
ister wit
h
a new user ID, a new passwor
d
an
d
a ne
w
admin
p
assword
T
i
p
:
Ho
w t
o
reset
Wh
i
l
e t
h
e is wor
k
in
g
ON, press a reset
h
o
le
in the rear panel
f
or 4-5 seconds. Then the gets
rebooted.

Installation
Setup Wizard ( More settings )
1
3
Click “ Network Setup “ to invoke the
Network Setup dialogue box
Manual setting of the network information
( In the event that “ Find “ is failed )
1
And click “ Save to “ to save
your settings
N
ot
e
Click and refer to “ Help “ to know how to
manua
ll
y enter t
h
e networ
k
in
f
ormation
p
p

Installation
14
Check the radio button “ Testing for
manual remote connection “ and click the
Next button
Manual setting for remote connection
2
Check “ I want to change the network
information of ” to invoke the
Network Setup dialogue box
Enter the new Network information that
you would like to change, and click “ Save
to “ to save your settings
Change the network information
3
1) Set up‘ port mapping ‘ on the local router
manually. Refer to the“ Setting Router “ if you
would like to know how to setup the router.
2) Enter the port number you specified in the
router
3) Click the“ Test “ button to check that
the settings are correct. If the remote
connection is successful, click to complete
the Setup Wizard
4) Click“ Next“ to complete the Setup Wizard
N
ote
Refer to“ How to configure the router using Port
Mapping “ after clicking the “ Setting Router“
gggg

Installation
1
5
4
Check the radio button “ I want to set ID
and password of my and
click the Next button to continue
Click “ Find “ to find the
network setting of . Then click
the Next button to continue
Enter the Administrator password to
go to the next step
You can make a new User ID and a new
Password in this step. After entering a
new User ID and a new Password, click
“register “ to complete
Changing the User ID and Password

Installation
Uninstallation
Click “Start” -> Go to PROGRAM
-> go to Linker -> select Uninstall
Click “ Next “ to continue
Click “ Unintall “
Click “ Close “ to complete the uninstallation
1
2
3
4
1
6

Linker
Registration while installing the Setup Wizard
Run the Setup Wizard
In order to enjoy the services remotely via the internet, it is required
that you register your first using the Setup Wizard.
For product registration, enter the following
information and click“ Register“
User ID and Password : choose the User ID
and password you wish to use for access to
your device
Admin Password : used when you change the
setting and firmware update via Setup Wizard.
In addition, Admin Password can be used when
you cut the streaming to the third person.
In the case that you forget the Admin Password,
you should reset the
Click“Start”
-> Go to PROGRAM
-> go to Linker
-> select Setup Wizard
1
17

Using the Linker
Linker Log - In
To activate the Linker Log-in window, complete either of the following:
Enter your User ID and Password,
then Click “ Log in“
When Login is successful, the
Log in window changes to
LinkService window
or
1
1
8

Using the Linker
Play Window
Menu Button : Use to check and Change the settings
Title bar : Displays the channel number and buffers status
Progressive bar : Displays the process status of the playing media
Remote controller : Activates the PC remote controller
Play / Stop / Next / Previous : Controls the playing file
Network info : Displays the network speed
Volume : Controls the volume ( Mute can be controlled using the PC remote
controller )
LinkService window button : Activates the Log In window or LinkService
window
Random / Sequential file play : Controls random or sequential file play
Running time and total playing time : Displays the run time of the playing file
and total play time
Full screen, Minimize, Maximize, Close button : Controls the screen size and
close the play window
1
1
2
3
4
5 6 7 8
9
10
11
2
3
4
5
6
7
8
9
10
11
1
9