Panasonic CS-E7GKEW User manual

Q
U
I
C
K
G
U
I
D
E
/
G
U
Í
A
R
Á
P
I
D
A
G
U
I
A
R
Á
P
I
D
O
/
Σ
Υ
Ν
Τ
Ο
Μ
Ο
Σ
Ο
∆
Η
Γ
Ο
Σ
G
U
I
A
R
Á
P
I
D
O
/
Q
U
I
C
K
G
U
I
D
E
/
G
U
Í
A
R
Á
P
I
D
A
Σ
Υ
Ν
Τ
Ο
Μ
Ο
Σ
Ο
∆
Η
Γ
Ο
Σ
Operating Instructions
Air Conditioner
IndoorUnit Outdoor Unit
CS-E7GKEW CU-E7GKE
CS-E9GKEW CU-E9GKE
CS-E12GKEW CU-E12GKE
F565488
ENGLISH 2~ 7
Beforeoperating the unit,
readthese operating
instructionsthoroughly
andkeep them for future
reference.
ESPAÑOL8~ 13
Antesde utilizar la unidad,
sírvaseleer atentamente
estasinstrucciones
defuncionamiento y
conservarlascomo futuro
elementode consulta.
PORTUGUÊS 14~ 19
Antesde ligar a unidade,
leiacuidadosamente
estemanual de utilização
eguarde-o para futura
referência.
E
ΛΛΗΝΙΚΆ 20~ 25
Προτού θέσετε τη μονάδα
σε λειτουργία
,διαβάστε
προσεκτικά αυτές τις οδηγίες
χρήσης και φυλάξτε τις για
μελλοντική αναφορά
.
Manufacturedby:
PanasonicHA Air-Conditioning (M) Sdn. Bhd.
Lot2, Persiaran TengkuAmpuan,Section 21, Shah Alam
IndustrialSite, 40300 Shah Alam, Selangor,Malaysia.
©2006 Panasonic HAAir-Conditioning
(M)Sdn Bhd (11969-T).All rights
reserved.Unauthorized copying and
distributionis a violation of law.
Matsushita Electric Industrial Co., Ltd.
WebSite: http://www.panasonic.co.jp/global/
Printedin Malaysia
OFSC0608-00
2
Start/stopthe operation.
Inicie/detengael funcionamiento.
Ligue/Desliguea unidade.
Ξεκινήστε/σταµατήστε τη
λειτουργία.
iredtemperature.
Seleccionela temperature
Programea temperatura
desejada.
Επιλέξτε την επιθυµητή
θερµοκρασία.
Selectfan speed.
Seleccionela velocidad del
ventilador.
Seleccionea velocidade da
ventilador.
Επιλογή ταχύτητας ανεμιστήρα.
Adjust the airflow direction
louver.
Ajustela persiana de dirección
del flujo de aire.
Ajustea placa de direcção do
fluxo de ar.
Ρυθμίστε τη γρίλια κατεύθυνσης
της ροής του αέρα.
4
4
5
5
For detailed explanation, please refer to pages 4 ~ 5.
Para una explicación detallada, por favor lea las páginas 10 y 1
1.
Consulte as páginas 16 ~ 17 para obter uma explicação mais pormenorizada.
Για λεπτοµερή εξήγηση, ανατρέξτε στις σελίδες 22 ~ 23.
ENGLISH 2 ~ 17
Before operating the unit,
read these operating
instructions thoroughly
and keep them for future
reference.
ESPAÑOL 18 ~ 33
Antes de utilizar la unidad,
sírvase leer atentamente
estas instrucciones
de funcionamiento y
conservarlas como futuro
elemento de consulta.
PORTUGUÊS 34 ~ 49
Antes de ligar a unidade,
leia cuidadosamente
este manual de utilização
e guarde-o para futura
referência.
EΛΛΗΝΙΚΆ 50~65
Προτού θέσετε τη μονάδα
σε λειτουργία, διαβάστε
προσεκτικά αυτές τις οδηγίες
χρήσης και φυλάξτε τις για
μελλοντική αναφορά.
Indoor Unit (DT-series)
Indoor Unit (DD-series)
Indoor Unit (DB-series)
Indoor Unit (GK-series)
Indoor Unit (GF-series)
Operating Instructions
Air Conditioner
Indoor Unit (GK-series)
CS-E7GKEW CS-E7GKDW
CS-E9GKEW CS-E9GKDW
CS-E12GKEW CS-E12GKDW
CS-E15GKEW CS-E15GKDW
CS-E18GKEW CS-E18GKDW
Indoor Unit (DT-series)
CS-ME10DTEG CS-E15DTEW
CS-E18DTEW
Indoor Unit (DD-series)
CS-ME10DD3EG CS-E15DD3EW
CS-E18DD3EW
Indoor Unit (DB-series)
CS-E15DB4EW CS-E18DB4EW
Indoor Unit (GF-series)
CS-E9GFEW CS-E12GFEW
CS-E18GFEW
Outdoor Unit
CU-3E18EBE CU-3E23CBPG
CU-4E27CBPG
F566398

2
DEFINITION
Warning Caution
To prevent personal injury, injury to others, or property damage, please observe the following.
Incorrect operation due to failure to follow instructions may cause harm or damage, the seriousness of which is classified as below:
Warning This sign warns of death or serious
injury. Caution This sign warns of injury or damage
to property.
The instructions to be followed are classified by the following symbols:
This symbol denotes an action that is
PROHIBITED. These symbols denote actions that are COMPULSORY.
Power Supply
During Operation
• Switch off the power supply before
cleaning or servicing.
• Turn off the power supply if the unit is not
used for a long period of time.
• This air conditioner is equipped with a
built-in surge protective device.
However, in order to further protect your
air conditioner from being damaged by
abnormally strong lightning activity, you
may want to disconnect it from the power
supply. Do not touch the air conditioner
during lightning, it may cause electric
shock.
Remote Control
During Operation
• Do not use rechargeable
(Ni-Cd) batteries.
• Do not allow infants and
small children to play with
the remote control to prevent
them from accidentally
swallowing the batteries.
• Remove the batteries if the
unit is not going to be used
for a long period of time.
• New batteries of the same
type must be inserted
following the polarity stated
to prevent malfunction of the
remote control.
Indoor Unit
During Installation
• Do not install, remove and
reinstall the unit by yourself;
improper installation will
cause leakage, electric
shock or fire. Please consult
an authorized dealer or
specialist for the installation
work.
During Operation
• Do not insert your fingers or
other objects into the indoor
or outdoor unit.
• Do not attempt to repair the
unit by yourself.
Indoor Unit
During Installation
• Do not install the unit in a potentially
explosive atmosphere.
• Ensure that the drainage pipe is
connected properly. Otherwise, leakage
may occur.
During Operation
• Do not wash the unit with water, benzene,
thinner or scouring powder.
• Do not use for other purposes such as
preservation of food.
• Do not use any combustible equipment in
front of the airflow outlet.
• Do not expose directly to cold air for a
long period.
• Aerate the room regularly.
Air
Air
inlet
inlet
Air
Air
outlet
outlet
Air
Air
inlet
inlet
Air
Air
inlet
inlet
Air
Air
outlet
outlet
Power Supply
During Installation
• This equipment must be earthed and
installed with ELCB. Otherwise, it may
cause electrical shock or fire in case of
malfunction.
During Operation
• Do not share the same power outlet with
other equipment.
• Do not modify power cords.
• Do not use extension cords.
• Do not operate with wet hands.
• Use the specified supply cord.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
• In case of emergency or abnormal
conditions (burnt smell, etc), turn off the
power supply, and consult your nearest
dealer.
Outdoor Unit
During Installation
• Ensure that the drainage pipe is
connected properly. Otherwise, leakage
may occur.
During Operation
• Do not sit or place anything on the indoor
or outdoor unit.
• After long periods of use, make sure the
installation rack is not damaged.
SAFETY PRECAUTIONS

3
ENGLISHENGLISHENGLISHENGLISH
REGULATORY INFORMATION
The appliance is not intended for use by young children or the infirm person without
supervision. Young children should be supervised to ensure that they do not play with the
appliance.
ENVIRONMENTAL REQUIREMENTS
Battery Disposal
The batteries must be recycled or disposed of properly.
END-OF-LIFE DISPOSAL
“Instructions for end-user” for air conditioners:
This air conditioner bears the above mark, indicating that electrical
equipment should not be disposed of alongside general household waste.
European Community countries (*), should have a dedicated collection
system for these products. Do not try to dismantle the system yourself as this
could have harmful effects on your health and on the environment as a result
of incorrect waste handling. This dismantling and disposal of refrigerant,
oil and other parts must be done by a qualified installer in accordance with
relevant local and national regulations. Air conditioners must be treated at a
specialized treatment facility for re-use, recycling and recovery and should
not be disposed of in the municipal waste stream. Please contact your
installer, dealer or local authority for more information. Penalties may also
be applicable for incorrect disposal of waste products, in accordance with
national legislation.
*subject to the national law of each member state
Information on Disposal in other countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this
product, please contact your installer, dealer or local authority and ask for the
correct method of disposal.
Use this air conditioner under the following temperature range.
Temperature (°C) Indoor Outdoor
*DBT: Dry bulb temperature
*WBT: Wet bulb temperature
*DBT *WBT *DBT *WBT
COOLING Maximum 32 23 43 26
Minimum 16 11 16 11
HEATING Maximum 30 – 24 18
Minimum 16 – -10 -11
OPERATION CONDITION
TABLE OF CONTENTS
Note:
The illustrations in this manual are for
explanation purposes only and may differ
from the actual unit. It is subjected to change
without notice for future improvement.
Thank you for purchasing
Air Conditioner
SAFETY PRECAUTIONS
2
REGULATORY INFORMATION
3
HOW TO OPERATE
(For GK-series indoor unit)
4~7
HOW TO OPERATE
(For DB, DD, DT, GF-series indoor unit)
8~9
MULTI AIR CONDITIONER
FUNCTION
CARE & CLEANING
(For DD-series indoor unit)
10
CARE & CLEANING
(For GK-series indoor unit)
11~12
CARE & CLEANING
(For DB-series indoor unit)
13
CARE & CLEANING
(For DT-series indoor unit)
14
CARE & CLEANING
(For GF-series indoor unit)
15
TROUBLESHOOTING
16~17
QUICK GUIDE
Back cover

4
• In heat mode, it takes a while for the unit to warm up. The
power indicator blinks during this operation.
HOW TO OPERATE (For GK-series indoor unit)
Remote
control
display
AUTO MODE - FOR YOUR CONVENIENCE
HEAT MODE - TO ENJOY WARM AIR
Close
Insert AAA or
R03 batteries
Pull out
Inserting the batteries
• The batteries can be used for approximately 1 year.
Replace the batteries when the remote control display or
transmission signal becomes weak.
Setting the current time
Select Turn on Adjust
temperature
Set time
Confirm
Press
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
MODE OPERATION
MODE OPERATION
MODE OPERATION
MODE OPERATION
AUTO HEAT
DRY COOL
• Unit selects the operation mode according to temperature
setting, outdoor and room temperature.
• Operation mode is reselected every 3 hours. During
operation mode selection the power indicator blinks.
Notes:
• Press RESET button to restore the remote control’s
default setting.
• For normal operation, the and RESET buttons are not
in use.
• While using remote control, please be aware of the OFF
indication on the remote control display to prevent the unit
from starting / stopping improperly.
• PATROL operates automatically once the unit is switched on
with button.
COOL MODE - TO ENJOY COOL AIR
• During soft dry operation, the indoor fan operates at low
fan speed to give a very gentle cooling operation.
The range of temperature for selection is 16°C ~ 30°C.
Operating the unit within the recommended
temperature could induce energy saving.
HEAT MODE : 20°C ~ 24°C.
COOL MODE: 26°C ~ 28°C.
DRY MODE : 1°C ~ 2°C lower than room temperature.
DRY MODE - TO DEHUMIDIFY THE
ENVIRONMENT
REMOTE CONTROL TRANSMITTER
For use with GK-series indoor unit.
• Make sure it is not obstructed.
• Certain fluorescent lights may interfere with signal transmission.
Please consult your nearest dealer.
Maximum distances : 8m
0!42/,
3%.3/2 
INDICATOR
INDICATOR
INDICATOR
INDICATOR
CS-E7GKDW, CS-E9GKDW, CS-E12GKDW, CS-E15GKDW,
CS-E7GKEW, CS-E9GKEW, CS-E12GKEW, CS-E15GKEW

5
ENGLISHENGLISHENGLISHENGLISH
4)-%2
, , and operations are available in all
modes and could be cancelled by pressing the respective button
again.
and or and operations could not be
activated at the same time.
and operations could be activated even when the
air-conditioner is turned off. In this condition, once e-ion indicator
is ON, the unit will operate with AUTO fan speed and air swing.
However, operation could not be activated if other indoor
unit is activating heating operation.
TO MONITOR AIR QUALITY
• This setting enables the patrol sensor
to automatically detect the air quality.
• When the air quality is unsatisfactory,
e-ion operation will start automatically.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the temperature you preferred.
• The timers repeat daily once set.
• If there is a power failure, you can restore the
previous setting (once power is resumed) by pressing
the button.
• If the timer is cancelled, press to restore the
previous setting.
The timer is based on the time set in the remote
control.
You can set your preferred time for ON and OFF
timers.
TO ENJOY QUIET ENVIRONMENT
• This setting provides a quiet environment by
reducing the airflow noise.
TO SELECT FAN SPEED
• There are 5 fan speeds, as well as
automatic*.
* For automatic fan speed, the speed
of the indoor fan is automatically
adjusted according to the operation.
TO ACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired
temperature to be reached quickly.
Select ON
or OFF
timer.
Set the
desired
time.
Confirm
the setting.
Hints
Temperature setting of 1°C higher in cool mode or
2°C lower in heat mode than the desired temperature
performs a 10% power saving.
To reduce power consumption during cool mode, close
the curtains to prevent the sunlight and heat from
coming in.
To disable the PATROL operation during unit start with
, press and hold for 5 seconds then
release.
To reset, press again for 5 seconds then release.
To set either 12-hour (am/pm) or 24-hour time
indication, press and hold for approximately 5
seconds.
To dim the indicator display on the air conditioner:
Press and hold for 5 seconds.
To reset, press again for 5 seconds.
To switch the temperature setting to °C or °F, press and
hold for approximately 10 seconds.
To cancel ON or OFF timer, press
or , then press .
• When you want the air conditioner to turn ON or OFF
automatically at a preset time.
TO SET THE TIMER
FEATURE OPERATION
FEATURE OPERATION
FEATURE OPERATION
FEATURE OPERATION
TIMER SETTING
TIMER SETTING
TIMER SETTING
TIMER SETTING
To turn off the air conditioner, press .
TO ENJOY CLEAN AIR
• This setting provides clean air by producing
negative ions to attract dust which will then
be captured at the positively charged e-ion
filters.
TO ADJUST AIRFLOW DIRECTION
• Keeps the room ventilated.
• There are 5 options for vertical airflow
direction.
• If automatic vertical airflow direction
has been set, the louvers swing up/
down automatically.
• In heat mode, the air blows horizontally
for a while, then starts to blow
downwards.
• Do not adjust the vertical airflow
direction louvers by hand.
• Horizontal airflow direction louver is
manually adjustable.

6
• In heat mode, it takes a while for the unit to warm up. The
power indicator blinks during this operation.
HOW TO OPERATE (For GK-series indoor unit)
Remote
control
display
AUTO MODE - FOR YOUR CONVENIENCE
HEAT MODE - TO ENJOY WARM AIR
Close
Insert AAA or
R03 batteries
Pull out
Inserting the batteries
• The batteries can be used for approximately 1 year.
Replace the batteries when the remote control display or
transmission signal becomes weak.
Setting the current time
Select Turn on Adjust
temperature
Set time
Confirm
Press
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
MODE OPERATION
MODE OPERATION
MODE OPERATION
MODE OPERATION
AUTO HEAT
DRY COOL
• Unit selects the operation mode according to temperature
setting, outdoor and room temperature.
• Operation mode is reselected every 3 hours. During
operation mode selection the power indicator blinks.
Notes:
• Press RESET button to restore the remote control’s
default setting.
• For normal operation, the and RESET buttons are not
in use.
• While using remote control, please be aware of the OFF
indication on the remote control display to prevent the unit
from starting / stopping improperly.
• PATROL operates automatically once the unit is switched on
with button.
COOL MODE - TO ENJOY COOL AIR
• During soft dry operation, the indoor fan operates at low
fan speed to give a very gentle cooling operation.
The range of temperature for selection is 16°C ~ 30°C.
Operating the unit within the recommended
temperature could induce energy saving.
HEAT MODE : 20°C ~ 24°C.
COOL MODE: 26°C ~ 28°C.
DRY MODE : 1°C ~ 2°C lower than room temperature.
DRY MODE - TO DEHUMIDIFY THE
ENVIRONMENT
Maximum distances : 8m
CS-E18GKDW, CS-E18GKEW
REMOTE CONTROL TRANSMITTER
For use with GK-series indoor unit.
• Make sure it is not obstructed.
• Certain fluorescent lights may interfere with signal transmission.
Please consult your nearest dealer.
INDICATOR
INDICATOR
INDICATOR
INDICATOR

7
ENGLISHENGLISHENGLISHENGLISH
4)-%2
, , and operations are available in all
modes and could be cancelled by pressing the respective button
again.
and or and operations could not be
activated at the same time.
and operations could be activated even when the
air-conditioner is turned off. In this condition, once e-ion indicator
is ON, the unit will operate with AUTO fan speed and air swing.
However, operation could not be activated if other indoor
unit is activating heating operation.
TO MONITOR AIR QUALITY
• This setting enables the patrol sensor
to automatically detect the air quality.
• When the air quality is unsatisfactory,
e-ion operation will start automatically.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the temperature you preferred.
• The timers repeat daily once set.
• If there is a power failure, you can restore the
previous setting (once power is resumed) by pressing
the button.
• If the timer is cancelled, press to restore the
previous setting.
The timer is based on the time set in the remote
control.
You can set your preferred time for ON and OFF
timers.
TO ENJOY QUIET ENVIRONMENT
• This setting provides a quiet environment by
reducing the airflow noise.
TO SELECT FAN SPEED
• There are 5 fan speeds, as well as
automatic*.
* For automatic fan speed, the speed
of the indoor fan is automatically
adjusted according to the operation.
TO ACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired
temperature to be reached quickly.
Select ON
or OFF
timer.
Set the
desired
time.
Confirm
the setting.
Hints
Temperature setting of 1°C higher in cool mode or
2°C lower in heat mode than the desired temperature
performs a 10% power saving.
To reduce power consumption during cool mode, close
the curtains to prevent the sunlight and heat from
coming in.
To disable the PATROL operation during unit start with
, press and hold for 5 seconds then
release.
To reset, press again for 5 seconds then release.
To set either 12-hour (am/pm) or 24-hour time
indication, press and hold for approximately 5
seconds.
To dim the indicator display on the air conditioner:
Press and hold for 5 seconds.
To reset, press again for 5 seconds.
To switch the temperature setting to °C or °F, press and
hold for approximately 10 seconds.
To cancel ON or OFF timer, press
or , then press .
• When you want the air conditioner to turn ON or OFF
automatically at a preset time.
TO SET THE TIMER
FEATURE OPERATION
FEATURE OPERATION
FEATURE OPERATION
FEATURE OPERATION
TIMER SETTING
TIMER SETTING
TIMER SETTING
TIMER SETTING
To turn off the air conditioner, press .
TO ENJOY CLEAN AIR
• This setting provides clean air by producing
negative ions to attract dust which will then
be captured at the positively charged e-ion
filters.
TO ADJUST AIRFLOW
DIRECTION
• Keeps the room ventilated.
• There are 5 options for horizontal/
vertical airflow direction.
• Do not adjust the horizontal and
vertical louvers by hand.
• If automatic horizontal/vertical airflow direction has been set, the
louvers swing left/right and up/down automatically.
• In heat mode, the air blows horizontally for a while, then starts
to blow downwards and the airflow louver start to swing left/right
after the temperature rises.

8
CANCEL
OFF
TIMER
ON
TIMER
SPEED
FAN
AUTO
HEAT
DRY
COOL
OFF
TIMER
ON
123
OFF
CLOCK RESET
SET
TEMP
AIR SWING
OFF/ON
QUIET
AUTO
MANUAL
CHECK
CANCEL
TIMER
ON
123
OFF
CLOCK RESET
SET
CHECK
OFF/ON
TEMP
(DB-Series) (DD-Series) (GF-Series) (DT-Series)
POWERFUL TIMER QUIET
POWER
INDICATOR
INDICATOR
INDICATOR
INDICATOR
• In heat mode, it takes a while for the unit to warm up. The
power indicator blinks during this operation.
HOW TO OPERATE (For DB, DD, DT, GF-series indoor unit)
AUTO MODE - FOR YOUR CONVENIENCE
HEAT MODE - TO ENJOY WARM AIR
Close
Insert AAA or
R03 batteries
Pull out
Inserting the batteries
• The batteries can be used for approximately 1 year.
Replace the batteries when the remote control display or
transmission signal becomes weak.
Setting the current time
Select Turn on Adjust
temperature
Set time
Confirm
Press
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
REMOTE CONTROL PREPARATION
MODE OPERATION
MODE OPERATION
MODE OPERATION
MODE OPERATION
AUTO HEAT
DRY COOL
• Unit selects the operation mode according to temperature
setting, outdoor and room temperature.
• Operation mode is reselected every 3 hours. During
operation mode selection the power indicator blinks.
COOL MODE - TO ENJOY COOL AIR
• During soft dry operation, the indoor fan operates at low
fan speed to give a very gentle cooling operation.
The range of temperature for selection is 16°C ~ 30°C.
Operating the unit within the recommended
temperature could induce energy saving.
HEAT MODE : 20°C ~ 24°C.
COOL MODE: 26°C ~ 28°C.
DRY MODE : 1°C ~ 2°C lower than room temperature.
DRY MODE - TO DEHUMIDIFY THE
ENVIRONMENT
Remote
control
display
Notes:
• Press button to restore the remote control’s default
setting.
• While using remote control, please be aware of the OFF
indication on the remote control display to prevent the unit
from starting / stopping improperly.
Maximum distances : 8m
CS-E15DB4EW, CS-E18DB4EW, CS-ME10DTEG, CS-E15DTEW, CS-E18DTEW, CS-E9GFEW,
CS-E12GFEW, CS-E18GFEW, CS-ME10DD3EG, CS-E15DD3EW, CS-E18DD3EW
For use with DB, DD, DT, GF-series indoor unit.
• Make sure it is not obstructed.
• Certain fluorescent lights may interfere with signal transmission.
Please consult your nearest dealer.
REMOTE CONTROL TRANSMITTER

9
ENGLISHENGLISHENGLISHENGLISH
2
ON
1
OFF
SET
and
QUIET
operations are available in all modes and
could be cancelled by pressing the respective button again.
and
QUIET
operations could not be activated at the
same time.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the temperature you preferred.
• The timers repeat daily once set.
• If there is a power failure, you can restore the
previous setting (once power is resumed) by pressing
the SET button.
• If the timer is cancelled, press SET to restore the
previous setting.
The timer is based on the time set in the remote
control.
You can set your preferred time for ON and OFF
timers.
QUIET
TO ENJOY QUIET ENVIRONMENT
• This setting provides a quiet environment by
reducing the airflow noise.
TO SELECT FAN SPEED
• There are 5 fan speeds, as well as
automatic*.
* For automatic fan speed, the speed
of the indoor fan is automatically
adjusted according to the operation.
TO ACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired
temperature to be reached quickly.
Select ON
or OFF
timer.
Set the
desired
time.
Confirm
the setting.
Hints
Temperature setting of 1°C higher in cool mode or
2°C lower in heat mode than the desired temperature
performs a 10% power saving.
To reduce power consumption during cool mode, close
the curtains to prevent the sunlight and heat from
coming in.
To set either 12-hour (am/pm) or 24-hour time
indication, press and hold
CLOCK
for approximately 10
seconds.
To cancel ON or OFF timer, press
ON or OFF , then press CANCEL .
• When you want the air conditioner to turn ON or OFF
automatically at a preset time.
TO SET THE TIMER
FEATURE OPERATION
FEATURE OPERATION
FEATURE OPERATION
FEATURE OPERATION
TIMER SETTING
TIMER SETTING
TIMER SETTING
TIMER SETTING
To turn off the air conditioner, press
OFF/ON
.
AIR SWING
AUTO
AIR SWING
MANUAL
• Keeps the room ventilated.
• AIR SWING - AUTO
• The vertical airflow louver swings up and
down automatically.
• In heat mode, the air blows horizontally for
a while, then starts to blow downwards.
• AIR SWING - MANUAL
• The airflow direction can be adjusted as
desired by using remote control.
• Do not adjust the vertical airflow direction
louvers by hand.
• Horizontal airflow direction louver is
manually adjustable.
• Both upper and lower horizontal
airflow direction louvers are manually
adjustable.
• The air is discharge evenly through
4 output vents.
• Air Swing is not applicable for DD-series
indoor unit.
TO ADJUST AIRFLOW DIRECTION
(DT-Series)
(GF-Series)
(DB-Series)

10
POWERFUL TIMER QUIET
POWER
Outdoor
Outdoor
unit
unit
Room A
Room A
Living
Living
room
room
Room B
Room B
MULTI AIR CONDITIONER FUNCTION
Caution (For GK-series indoor unit):
and operations could be
activated even when the air-conditioner
is turned off. In this condition, once e-ion
indicator is ON, the unit will operate with
AUTO fan speed and air swing.
However, operation could not be
activated if other indoor unit is activating
heating operation.
Multi air conditioner system has one outdoor unit connected to multiple indoor units.
• It is possible to operate the indoor units individually or simultaneously.
• The operation mode priority is given to the first unit that turned on.
• During operation, heating and cooling mode could not be activated at the same time for different indoor unit.
• The power indicator blinks to indicate the indoor unit is standing by for different operation mode.
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
DEFINITION
CARE & CLEANING (For DD-series indoor unit)
To operate the air-conditioner when the remote
control is misplaced or malfunctioned.
Action Mode
Press once. Automatic
Press and hold until you hear one beep,
then release. Cooling
Press and hold until you hear one beep
then release.
Press and hold until you hear two beeps
then release.
Heating
• To turn off, press the AUTO OFF/ON button again.
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
Hint
These units are mounted inside the ceiling. It uses external air intake vent and air outlet vent to operate. Please consult your nearest dealer for
seasonal inspection.
CS-ME10DD3EG, CS-E15DD3EW, CS-E18DD3EW

11
ENGLISHENGLISHENGLISHENGLISH
Raise and pull to
remove. Wash gently
and dry.
FRONT PANEL
FRONT PANEL
FRONT PANEL
FRONT PANEL
Remove
Remove
Wipe the unit
gently with a
soft, dry cloth.
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
e-ion AIR PURIFYING SYSTEM
e-ion AIR PURIFYING SYSTEM
e-ion AIR PURIFYING SYSTEM
e-ion AIR PURIFYING SYSTEM
Do not touch during operation
To operate the air-conditioner when the remote
control is misplaced or malfunctioned.
Action Mode
Press once. Automatic
Press and hold until you hear one beep,
then release. Cooling
Press and hold until you hear one beep
then release.
Press and hold until you hear two beeps
then release.
Heating
• To turn off, press the AUTO OFF/ON button again.
CARE & CLEANING (For GK-series indoor unit)
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AIRFLOW DIRECTION
AIRFLOW DIRECTION
LOUVER
LOUVER
AIRFLOW DIRECTION
AIRFLOW DIRECTION
LOUVER
LOUVER
Switch off the power supply before cleaning
ACTIVE e-ion POWER MODULE
• Clean the filters regularly.
• Wash/rinse the filters gently with water to avoid
damage to the filter surface.
• Dry the filters thoroughly under the shade, away
from fire or direct sunlight.
e-ion FILTERS
Clean with dry cotton
bud.
• Active e-ion
generator cleaning is
recommended every 6
months.
ACTIVE e-ion GENERATOR
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
WASHING INSTRUCTIONS Hints
Clean the filter regularly for best performance and to reduce
power consumption.
Please consult your nearest dealer for seasonal inspection.
CS-E7GKDW, CS-E9GKDW, CS-E12GKDW, CS-E15GKDW,
CS-E7GKEW, CS-E9GKEW, CS-E12GKEW, CS-E15GKEW

12
CS-E18GKDW, CS-E18GKEW
Raise and pull to
remove. Wash gently
and dry.
FRONT PANEL
FRONT PANEL
FRONT PANEL
FRONT PANEL
Remove
Remove
Wipe the unit
gently with a
soft, dry cloth.
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
e-ion AIR PURIFYING SYSTEM
e-ion AIR PURIFYING SYSTEM
e-ion AIR PURIFYING SYSTEM
e-ion AIR PURIFYING SYSTEM
Do not touch during operation
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
WASHING INSTRUCTIONS Hints
Clean the filter regularly for best performance and to reduce
power consumption.
Please consult your nearest dealer for seasonal inspection.
CARE & CLEANING (For GK-series indoor unit)
AIRFLOW DIRECTION
AIRFLOW DIRECTION
LOUVER
LOUVER
AIRFLOW DIRECTION
AIRFLOW DIRECTION
LOUVER
LOUVER
Switch off the power supply before cleaning
ACTIVE e-ion POWER MODULE
• Clean the filters regularly.
• Wash/rinse the filters gently with water to avoid
damage to the filter surface.
• Dry the filters thoroughly under the shade, away
from fire or direct sunlight.
e-ion FILTERS
Clean with dry cotton
bud.
• Active e-ion
generator cleaning is
recommended every 6
months.
ACTIVE e-ion GENERATOR
To operate the air-conditioner when the remote
control is misplaced or malfunctioned.
Action Mode
Press once. Automatic
Press and hold until you hear one beep,
then release. Cooling
Press and hold until you hear one beep
then release.
Press and hold until you hear two beeps
then release.
Heating
• To turn off, press the AUTO OFF/ON button again.
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON

13
ENGLISHENGLISHENGLISHENGLISH
OPEN CLOSE
CLOSE OPEN
CARE & CLEANING (For DB-series indoor unit)
CLOSE OPEN
OPEN CLOSE
CS-E15DB4EW, CS-E18DB4EW
Wipe the unit
gently with a
soft, dry cloth.
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
Remove
Remove
• It is recommended to clean the filters once every 6 weeks.
• Wash/rinse the filters gently with water to avoid damage to
the filter surface.
• Dry the filters thoroughly under the shade, away from fire or
direct sunlight.
AIR FILTER
AIR FILTER
AIR FILTER
AIR FILTER
To operate the air-conditioner when the remote
control is misplaced or malfunctioned.
Action Mode
Press once. Automatic
Press and hold until you hear one beep,
then release. Cooling
Press and hold until you hear one beep
then release.
Press and hold until you hear two beeps
then release.
Heating
• To turn off, press the AUTO OFF/ON button again.
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
WASHING INSTRUCTIONS Hints
Clean the filter regularly for best performance and to reduce
power consumption.
Please consult your nearest dealer for seasonal inspection.
Switch off the power supply before cleaning

14
CS-ME10DTEG, CS-E15DTEW, CS-E18DTEW
CARE & CLEANING (For DT-series indoor unit)
Wipe the unit gently with a
soft, dry cloth.
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
AIR FILTER
AIR FILTER
AIR FILTER
AIR FILTER
Remove
Remove
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
WASHING INSTRUCTIONS Hints
Clean the filter regularly for best performance and to reduce
power consumption.
Please consult your nearest dealer for seasonal inspection.
Switch off the power supply before cleaning
To operate the air-conditioner when the remote
control is misplaced or malfunctioned.
Action Mode
Press once. Automatic
Press and hold until you hear one beep,
then release. Cooling
Press and hold until you hear one beep
then release.
Press and hold until you hear two beeps
then release.
Heating
• To turn off, press the AUTO OFF/ON button again.
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AIRFLOW DIRECTION
AIRFLOW DIRECTION
LOUVER
LOUVER
AIRFLOW DIRECTION
AIRFLOW DIRECTION
LOUVER
LOUVER
• It is recommended to clean the filters once every 6 weeks.
• Wash/rinse the filters gently with water to avoid damage to
the filter surface.
• Dry the filters thoroughly under the shade, away from fire or
direct sunlight.

15
ENGLISHENGLISHENGLISHENGLISH
CARE & CLEANING (For GF-series indoor unit)
AIR OUTLET SELECTION SWITCH
AIR OUTLET SELECTION SWITCH
AIR OUTLET SELECTION SWITCH
AIR OUTLET SELECTION SWITCH
1. Release
1. Release
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
WASHING INSTRUCTIONS Hints
Clean the filter regularly for best performance and to reduce
power consumption.
Please consult your nearest dealer for seasonal inspection.
INTAKE GRILLE
INTAKE GRILLE
INTAKE GRILLE
INTAKE GRILLE
1. Release 2 levers to open.
2. Release string to remove.
Wash gentle and dry.
AIR FILTER
AIR FILTER
AIR FILTER
AIR FILTER
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
INDOOR UNIT
Remove
Remove
Remove
Remove
1. Release
1. Release
2. Release
2. Release
• Clean the filters regularly.
• Wash/rinse the filters gently with water to avoid
damage to the filter surface.
• Dry the filters thoroughly under the shade, away
from fire or direct sunlight.
Wipe the unit
gently with a
soft, dry cloth.
To select preferred airflow pattern.
Selection Pattern Description
This setting blows air from upper outlet only.
This setting automatically decides airflow pattern depending on mode and
conditions (Default and recommended).
For Heat mode, during start or low discharge temperature
/ For Cool mode, when setting temperature is achieved,
the air is blown from the upper air outlet only.
Air is blown from the upper and lower air outlets for high
speed cooling during COOL mode, and for filling the room
with warm air during HEAT mode.
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
AUTO OFF/ON BUTTON
Switch off the power supply before cleaning
To operate the air-conditioner when the remote
control is misplaced or malfunctioned.
Action Mode
Press once. Automatic
Press and hold until you hear one beep,
then release. Cooling
Press and hold until you hear one beep
then release.
Press and hold until you hear two beeps
then release.
Heating
• To turn off, press the AUTO OFF/ON button again.
CS-E9GFEW, CS-E12GFEW, CS-E18GFEW

16
Symptom Cause
Power indicator blinks before the unit is
switched on.
The operation mode is different from other indoor unit.
This is a preliminary step in preparation for the operation when the ON timer has been set.
Power indicator blinks during operation
and the indoor fan is stopped.
The unit is in defrost mode, and the melted frost is drained from the outdoor unit.
Occasionally knocking sound is heard. Switching over of refrigerant gas in the system during defrosting and at the end of
operations.
Cracking sound can be heard during
operations.
Panel expanding/contracting due to change in temperature.
Water flowing sound during operations. Refrigerant flow inside the unit.
Airflow continues even after operation has
stopped.
Extraction of remaining heat from the indoor unit (maximum 30 seconds).
Indoor fan stops occasionally during
heating operation.
To avoid unintended cooling effect.
Indoor fan stops occasionally during
automatic fan speed setting.
This helps to remove the surrounding odour.
The room has a peculiar odour. This may due to damp smell emitted by the wall, carpet, furniture or clothing.
Mist emerges from indoor unit. Condensation effect due to cooling process.
Outdoor unit emits water/steam. Condensation or evaporation occurs on pipes.
Timer indicator is always on. The timer setting repeats daily once set.
Operation is delayed a few minutes after
restart.
The delay is a protection to the unit’s compressor.
TROUBLESHOOTING
The following symptoms do not indicate malfunction.
Symptom Check
Heating/Cooling operation is not working
efficiently.
Set the temperature correctly.
Close all doors and windows.
Clean or replace the filters.
Clean any obstruction at the air inlet and air outlet vents.
Noisy during operation. Check if the unit has been installed at an incline.
Close the front panel properly.
Remote control does not work. Insert the batteries correctly.
Replace weak batteries.
The unit does not work. Check if the circuit breaker is tripped.
Check if timers have been set.
Patrol sensor or e-ion indicator on the
indoor unit is blinking (for GK-series
indoor unit).
Press or twice. If the patrol sensor or e-ion indicator still blinking, please consult
your nearest dealer.
Check the following before calling for servicing.
For GF-series indoor unit.
Jot down error code at indicator.
CHECK
TIMER
ON SET
OFF CANCEL
132Press to retrieve error
code, then jot down the
error code at indicator.
If the error code does not appear at the
indicator.
For DB, DD, DT, GK-series indoor unit.
Press for 5 seconds.
Press until you hear beep
sound, then jot down the
error code.
Press for 5 seconds to quit
checking.
CHECK
TIMER
ON SET
OFF CANCEL
132
Turn the unit off and reveal the error code to your nearest dealer.
Note:
• The unit may be operable (with 4 beeps) on a limited basis, depending on the error.
The unit stops and the timer indicator blinks.

17
ENGLISHENGLISHENGLISHENGLISH
TURN OFF POWER SUPPLY and CALL Authorized Distributor under the following conditions:
• Abnormal noise during operation. • Circuit breaker switches off frequently.
• Water/foreign particles have entered the remote control. • Power cord becomes unnaturally warm.
• Water leaks from Indoor unit. • Switches or buttons are not functioning properly.
NON SERVICEABLE CRITERIAS
• Activate heat mode for 2~3 hours to thoroughly dry the unit.
• Turn off the power supply.
• Remove the remote control batteries.
FOR EXTENDED NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents:
Cooling: 8°C
Heating: 14°C
SEASONAL INSPECTION AFTER EXTENDED NON-USE

18
DEFINICIÓN
Advertencia Precaución
Para prevenir daños personales, daños a otras personas o daños materiales, se deben seguir las instrucciones siguientes.
El uso incorrecto por no seguir las instrucciones puede causar daños o averías; su gravedad se clasifica con las indicaciones siguientes:
Advertencia Esta indicación advierte del
posible peligro de muerte o de
daños graves. Precaución Esta indicación advierte de los
posibles daños o desperfectos
materiales.
Las instrucciones que deben seguirse están clasificadas mediante los siguientes símbolos:
Este símbolo denota una acción que está
PROHIBIDA. Estos símbolos denotan acciones
que son OBLIGATORIAS.
Fuente de energía
Durante el funcionamiento
• Apague la unidad antes de proceder a la
limpieza o al mantenimiento.
• Desconecte la unidad si no va a utilizarla
durante un periodo prolongado de tiempo.
• Este aparato de aire acondicionado
dispone de un dispositivo incorporado
de protección frente a sobrecargas. Sin
embargo, y para evitar posibles averias
provocadas por tormentas eléctricas
especialmente violentas, se recomienda
desenchufar la unidad. No toque el
aparato de aire acondicionado si hay
tormentas: podría sufrir una descarga
eléctrica.
Mando a Distancia
Durante el funcionamiento
• No utilice pilas recargables
(Ni-Cd).
• No permita que bebés y
niños pequeños jueguen
con el mando a distancia
para evitar que ingieran
accidentalmente las pilas.
• Extraiga las pilas si no va
a utilizar la unidad durante
un periodo prolongado de
tiempo.
• Para que el mando a
distancia funcione bien, es
necesario insertar las pilas
según la polaridad indicada.
Unidad Interior
Durante la instalación
• No instale, desinstale ni
reinstale la unidad usted
mismo; una instalación
incorrecta podría causar fugas
de agua, descargas eléctricas
o incendios. Consulte con un
distribuidor autorizado o con
un especialista para realizar el
trabajo de instalación.
Durante el funcionamiento
• No introduzca los dedos ni
ningún otro objeto en la unidad
interior o exterior.
• No intente reparar la unidad
usted mismo.
Unidad Interior
Durante la instalación
• No instale la unidad en una atmósfera
potencialmente explosiva.
• Verifique que los tubos de drenaje estén
conectados adecuadamente. De lo
contrario, podrían producirse pérdidas de
agua.
Durante el funcionamiento
• No lave la unidad con agua, benceno,
disolvente o limpiador en polvo.
• No utilice la unidad para otros fines, como
la conservación de alimentos.
• No utilice ningún equipo combustible en
la dirección del flujo de aire.
• No se exponga directamente al aire frío
durante un periodo prolongado de tiempo.
• Ventile la habitación con regularidad.
Entrada
Entrada
de aire
de aire
Salida
Salida
de aire
de aire
Fuente de energía
Durante la instalación
• Este equipo debe estar conectado a tierra e
instalado con interruptor de circuito con toma
de tierra. De lo contrario, podría provocar
descargas eléctricas o un incendio en caso
de mal funcionamiento.
Durante el funcionamiento
• No conecte otros aparatos a la misma toma
de corriente.
• No manipule los cables de alimentación.
• No utilice cables de extensión.
• No utilice la unidad con las manos mojadas.
• Utilice el cable de alimentación especificado.
• Para evitar riesgos, si el cable de
alimentación está dañado y es necesario
cambiarlo, deberá hacerlo el fabricante, un
representante del servicio técnico o una
persona cualificada.
• En caso de emergencia o condiciones
anormales (olor a quemado, etc.), apáguelo,
y consulte su proveedor más cercano.
Unidad Exterior
Durante la instalación
• Verifique que los tubos de drenaje estén
conectados adecuadamente. De lo
contrario, podrían producirse pérdidas de
agua.
Durante el funcionamiento
• No apoye ni coloque ningún objeto en la
unidad interior o exterior.
• Después de haber utilizado la unidad
durante periodos de tiempo prolongados,
compruebe que el bastidor de instalación
no esté dañado.
PRECAUCIONES DE SEGURIDAD
Entrada
Entrada
de aire
de aire
Entrada
Entrada
de aire
de aire
Salida
Salida
de aire
de aire

19
ENGLISHESPAÑOLENGLISHENGLISH
CONTENIDO
Nota:
Las ilustraciones de este manual sirven
únicamente para describir las explicaciones
y pueden no coincidir exactamente con las
del aparato suministrado. Están sujetas
a cambios sin previo aviso con el fin de
mejorar el producto.
Muchas gracias por elegir una
unidad de aire acondicionado
PRECAUCIONES DE SEGURIDAD
18
INFORMACIÓN REGLAMENTARIA
19
PARA PONER EN FUNCIONAMIENTO
(Para unidad interior serie GK)
20~23
PARA PONER EN FUNCIONAMIENTO
(Para unidad interior serie DB, DD, DT y GF)
24~25
FUNCIÓN DE ACONDICIONADOR
DE AIRE MÚLTIPLE
CUIDADO Y LIMPIEZA
(Para unidad interior serie DD)
26
CUIDADO Y LIMPIEZA
(Para unidad interior serie GK)
27~28
CUIDADO Y LIMPIEZA
(Para unidad interior serie DB)
29
CUIDADO Y LIMPIEZA
(Para unidad interior serie DT)
30
CUIDADO Y LIMPIEZA
(Para unidad interior serie GF)
31
LOCALIZACIÓN DE AVERÍAS
32~33
GUÍA RÁPIDA
Cubierta trasera
INFORMACIÓN REGLAMENTARIA
Utilice este aparato de aire acondicionado dentro del siguiente intervalo de temperaturas.
Temperatura (°C) Interior Exterior
*DBT: Temperatura en seco
*WBT: Temperatura en húmedo
*DBT *WBT *DBT *WBT
ENFRIAMIENTO Máxima 32 23 43 26
Mínima 16 11 16 11
CALENTAMIENTO Máxima 30 – 24 18
Mínima 16 – -10 -11
CONDICIONES DE FUNCIONAMIENTO
Este aparato no debe ser utilizado por niños ni por personas discapacitadas sin
supervisión. Se debe vigilar que los niños no jueguen con el aparato.
REQUISITOS MEDIOAMBIENTALES
Cómo deshacerse de las pilas
Debe reciclar las pilas o deshacerse de ellas correctamente.
CÓMO DESHACERSE DEL APARATO
“Instrucciones para usuarios finales” de aparatos de aire acondicionado:
Este aparato de aire acondicionado incluye la marca mostrada arriba, que
indica que no debe deshacerse del equipo eléctrico del mismo modo que
lo haría con otros desechos domésticos. Los países de la Comunidad
Europea (*) cuentan con un sistema dedicado a la recolección de este tipo
de productos. No intente desmontar el sistema por sus propios medios,
ya que podría tener efectos nocivos sobre su salud y dañar el entorno
por la manipulación incorrecta de desechos. La extracción y desechado
del refrigerante, el aceite y otras piezas debe ser llevado a cabo por
un instalador cualificado y siempre siguiendo las normativas locales y
nacionales correspondientes. Los aparatos de aire acondicionado deben
tratarse como dispositivos de tratamiento especializado para su reutilización,
reciclaje y recuperación, y no deben eliminarse dentro del flujo normal de
desechos municipales. Póngase en contacto con un instalador, distribuidor
o autoridad local para obtener más información. También se pueden aplicar
sanciones por una incorrecta manipulación de productos de desecho, según
las leyes nacionales.
*sujeto a la legislación nacional de cada Estado Miembro
Información relativa al modo de deshacerse de productos eléctricos en
otros países fuera de la Unión Europea
Estos símbolos sólo son válidos en la Unión Europea. Si quiere deshacerse
de este producto, póngase en contacto con un instalador, distribuidor o
autoridad local para informarse sobre el método más adecuado.

20
0!42/,
3%.3/2 
PARA PONER EN FUNCIONAMIENTO (Para unidad interior serie GK)
TRANSMISOR DE MANDO A DISTANCIA
Para utilizar con unidad interior serie GK.
• Asegúrese de que el paso de la señal no esté obstruido.
• Algunos tipos de lámparas fluorescentes pueden interferir en la
transmisión de la señal. Consulte con el distribuidor más cercano.
CS-E7GKDW, CS-E9GKDW, CS-E12GKDW, CS-E15GKDW,
CS-E7GKEW, CS-E9GKEW, CS-E12GKEW, CS-E15GKEW
Notas:
• Pulse el botón RESET para restablecer los ajustes
predeterminados del mando a distancia.
• En funcionamiento normal, los botones y RESET no se
utilizan.
• Mientras utilice el mando a distancia, procure estar atento
al indicador OFF de la pantalla del mando a distancia para
impedir que la unidad comience / pare incorrectamente.
• PATROL funciona automáticamente una vez que la unidad
es encendida con el botón .
MODO AUTOMÁTICO - PARA SU CONVENIENCIA
• En el modo de calentamiento, la unidad tarda unos
instantes en calentarse. El indicador de encendido
parpadea durante el funcionamiento.
MODO CALOR - PARA DISFRUTAR DE AIRE
CALIENTE
MODO FRÍO - PARA DISFRUTAR DE AIRE
FRÍO
• En modo deshumidificación, el ventilador interior funciona
a baja velocidad para lograr una función de suave
refrigeración.
El rango de temperaturas para seleccionar va de
16°C ~ 30°C.
El funcionamiento de la unidad dentro de la
temperatura recomendada podría resultar en el
ahorro de energía.
MODO CALOR : 20°C ~ 24°C.
MODO FRÍO : 26°C ~ 28°C.
MODO DESHUMIDIFICACIÓN : 1°C ~ 2°C menos que la
temperatura ambiente.
MODO DESHUMIDIFICACIÓN - PARA
DESHUMIDIFICAR EL AMBIENTE
Seleccionar Conectar Ajuste de
temperatura
AUTO HEAT
DRY COOL
• La unidad selecciona automáticamente el modo de
funcionamiento según los ajustes de temperatura y las
temperaturas interior y exterior.
• El modo de operación es seleccionado nuevamente cada
3 horas. Durante la selección del modo de operación el
indicador de encendido parpadea.
MODO DE OPERACIÓN
MODO DE OPERACIÓN
MODO DE OPERACIÓN
MODO DE OPERACIÓN
Pantalla del
mando a
distancia
Cierre
Inserte pilas AAA
o R03
Quite
Insertar las baterías
• La vida útil de las pilas suele ser aproximadamente de
1 año. Cambie las pilas cuando la pantalla del mando a
distancia o la señal de transmisión se vuelvan débiles.
Programar la hora
Ajuste la hora
Confirmar
Pulse
PREPARACIÓN DEL MANDO A
PREPARACIÓN DEL MANDO A
DISTANCIA
DISTANCIA
PREPARACIÓN DEL MANDO A
PREPARACIÓN DEL MANDO A
DISTANCIA
DISTANCIA
Distancia máxima : 8m
INDICADOR
INDICADOR
INDICADOR
INDICADOR