Panasonic DMP-BD55; DMP-BD35 User manual

Panasonic
Operating Instructions
Blu-ray Disc Player
Model No. DMP-BD55
DMP-BD35
- --- ------------------------- -
~ _; Panasonic
----=-=--
The illustration shows the image of DMP-BD55.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
~
BD~
~
~
[Q]O§@
C~~
$)
Blu·r~yD/sc
lJ,LIVETM
VIDEO
DIGITAL AUDIO
~
=-'
s~,·
Hom."
'11_ (~ ~ir1kTM
L:\VCHD TM
Java-
':'3
'4IQttOHINlT\OHUU~'tlol(Ol.o.tNu:Il'.\Cf.
POWERED
I!DJII:The warranty can be found on page 42.
mm:!lI:The warranty can be found on page 43.
• g"d:"~' 'm .""gy 'ffio'."'Y
'ji'iititJit.!;1
• For Canada only: The word "Participant" is used in place of the word
"Partner".
Region management information
SD·Video Example:
This unit plays BD-Video marked with labels containing the region code A.
.=tit.
@1
CJ
ml3
DVD·Video
Example:
This unit plays DVD·Video marked with labels containing the region number "1" or "ALL".
(1)(1)
(I)
HHIf you have any questions contact
As an ENERGY STAR" Partner,·
~:1-800-211-PANA(7262)
III
Panasonic has determined that
mmD:1-800-561-5505
, ~
this roduct meets the ENERGY STAR"
La referencia rapida en espanol se puede encontrar en la pagina 45.
RQT9243-P

IMPORTANT SAFETY INS-rRUCTIONS
DANGER - VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AVOID DIRECT
EXPOSURE TO BEAM FlJ,o, 21 ':FR CI;,l>. m~
(Inside ot product)
CAUTION
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DONOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits
for aClass Bdigital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in aresidential installation. This eqUipment
~enerates, uses, and can radiate radio frequency energy and, if not
Installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
HDwever, there is no
guarantee that interference will not occur in aparticular installation.
If this equipment does cause harmful interference
to radio or
television reception, which can be determined by turning the
equipment
Dff and on, the user is encDuraged tD try to CDrrect the
Interference by one
Dr more of the following measures:
-Reorient or relDcate the receiving antenna.
-Increase the separation between the equipment and receiver.
-CDnnect the equipment into an outlet
on acircuit different from
that
tD which the receiver is cDnnected.
-Consult the dealer or an experienced radiofTV technician for help.
FCC
Caution: To assure continued compliance, follow the
attached Installation instructions and use only shielded
interface cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation
is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
Interference received. including interference that may cause
undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus,
NJ 07094
Support Contact:
Panasonic Consumer Electronics CDmpany
Telephone No.: 1-800-211·PANA (7262)
The lightning flash with arrowhead symbol, within
A
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
A
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit
and the applicable
safety instructions listed below.
Keep these operating
instructions
handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean
only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance
with the manufacturer's instructions.
8)
Do not install near any heat sources such as radiators heat
registers, stoves, or other apparatus (including amplifi~rs)
that produce heat.
9)
Do not defeat the safety purpose of the polarized or
grounding-type plug. Apolarized plug
has two blades with
one
wider than the other. Agrounding-type plug has two
blades
and athird grounding prong. The wide blade or the
third prong
are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement
of the obsolete outlet.
10) Protect
the power cord from being walked on or pinched
particularly at plugs, convenience receptacles,
and the point
where they exit from the apparatus.
11)
Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or •
table specified by the manufacturer,
or sold with
the apparatus.
When a cart is used, use
caution when
moving the carVapparatus
combination
to avoid injury from tip-over.
13)
Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refe.r all servicing
to qualified service personnel. Servicing is
required
when the apparatus has been damaged in any way,
such as
power-supply cord or plug is damaged. liquid has
been spilled or objects have fallen into the apparatus, the
apparatus
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
-DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
-USE ONLY THE RECOMMENDED ACCESSORIES.
-DO NOT REMOVE THE COVER (OR BACK); THERE
ARE
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A
BOOKCASE, BUILT-IN CABINET
OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS
WELL
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE
THAT CURTAINS AND ANY OTHER MATERIALS DO NOT
OBSTRUCT THE VENTILATION VENTS.
CAUTION!
THIS PRODUCT UTILIZES ALASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING
TO QUALIFIED
PERSONNEL.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended b.y the manufacturer. Dispose of used
battenes according to the manufacturer's instructions.
The socket outiet shall be installed near the equipment and
easily accessible. The mains plug of the power supply cord
shall remain readily operable.
To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from AC receptacle.

Unit and media care
Disc and card handling ,
-. -
Clean discs
DO DO NOT
~~
Wipe with adamp cloth and then wipe dry.
Disc and card handling precautions
-Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.
-Do not attach labels or stickers to discs (This may cause disc warping, rendering it unusable).
-Do not write on the label side with aball-point pen or other writing instrument.
-Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.
-
Do not use scratch-proof protectors or covers.
-Clean any dust, water, or foreign matter from the terminals on the rear side of the card.
-Do not use the following discs:
-Discs with exposed adhesive from removed stickers or labels (rented discs etc).
-Discs that are badly warped or cracked.
-Irregularly shaped discs, such as heart shapes.
Maintenance
~ .--
Clean this unit with asoft, dry cloth
-Never use alcohol, paint thinner or benzine to clean this unit.
-Before using chemically treated cloth, carefully read the instructions that came with the cloth.
Observe
the following points to ensure continued listening and viewing pleasure.
Dust and dirt may adhere to the unit's lens over time, making it impossible to play discs.
Use the lens cleaner (not included) about once every year, depending
on frequency of use and the operating environment. Carefully read the lens
cleaner's instructions before use.
Lens cleaner: RP-CL720PP
-This lens cleaner is sold as specific for OlGA, but can be used
without problem
on this unit as well.
To dispose or transfer this unit
-. . - ~ ~ -- _. .. - ~ .. -~. .------ ... --
This unit may record information of your operating procedures. If you discard this unit either by disposal or transfer, then follow the procedures to
return all the settings
to the factory presets to delete the recorded information. (~ 38, ''To return to the factory preset")
-When BO-Video
is played back, the operation history may be recorded in the memory of this unit. The recorded contents differ depending on the
disc.

Table of contents
Getting started
- -- .- ~ -
IMPORTANT SAFETY
INSTRUCTIONS 2
Unit and media care 3
Accessory information 5
Disc and
card information 6
Audio and video information 8
Con
nections 10
Broadband network connection 14
Firmware
updates 14
Remote
control and unit reference
guide 15
Setting 16
Network settings 17
Playback 'J
. . .
Basic play
(Playing video contents) 19
Enjoying the advanced functions on
SO-Video discs 21
Chapter playback 22
Playing
still pictures 22
Playing DivX
videos 24
Playing
music 25
Linked operations with the TV
(VIERA Link™ "HDAVI ControI™'').... 26
Settings
Changing settings with the
on-screen menu 28
Changing the unit's settings 30
Reference
About MP3/JPEG/DivX files 35
Messages 36
Troubleshooting guide 38
Specifications 41
Limited Warranty
(ONLVFOR U.S.A. )42
Limited Warranty
(ONLY FOR CANADA) 43
Product Service 44
Licenses !!!'!!! •••••••• 44
Referencia rapida en
espanol
(Spanish Quick Reference) 45
Glossary '46
Index
Back cover
About descriptions in these operating instructions
•These operating instructions are applicable to models DMP-BD55 and DMP-BD35. Unless otherwise indicated, illustrations in
these operating instructions are of DMP-BD55.
rnllii]J :indicates features applicable to DMP-BD55 only.
1 B03S1 :indicates features applicable to DMP-BD35 only.
i/·-·'··
,\ 4 ,
'-\'-"-'./
RO~"9243··_·····_-_··~~-------_·_· ... -- .. --.--.----------.--
I
~/
--------_ ... ,.../

Accessory information
oo
o
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for
replacement parts.
(Product numbers correct as of August 2008. These may be subject to change.)
o
Only for U.S.A.: To order accessories, refer to "Accessory Purchases" on page 42.
Only for Canada: To order accessories, call the dealerfrom whom you have made your purchase.
~---------_._---------------------_._-----
1Remote control
(N2QAYB000184)
AudioNideo
cable
(K2KA6BA00004)
2Batteries
for remote control 1
AC power supply cord
(K2CB2CB00022)
eFor use with this unit only.
Do not use it with other equipment.
Also, do not use cords from other
equipment with this
unit
(ONLY FOR U.S.A. )
Product Registration Card
Please complete and return the included product registration card, or register via the Internet at:
http://www.prodreg.com/panasonic/
[B@:
180351: (ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the
unit
Using the remote control ;
~ --...... - ... ~ - ,.- -.-.- ~ -.
Batteries
Insert so the poles (+ and -) match those in the remote control.
When closing the lid. insert it from the -(minus) side.
Use
Remote control signal sensor
~c:::=9o
{C~
R6/LR6, AA 7 m (23 feet) directly
in front
of the unit
eDo not use rechargeable type batteries.
eDo not mix old and new batteries.
eDo not use different types at the same time.
eDo not heat or expose to flame.
eDo not leave the battery(ies) in an automobile exposed to direct
sunlight for along period of time with doors and windows closed.
e
Do not take apart or short circuit.
eOo not attempt to recharge alkaline or manganese batteries.
eOo not use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause afire.
Remove batteries if the remote control
is not going to be used for a
long period of time. Store in acool, dark place.
If you cannot operate the unit or other equipment using the remote
control after changing the batteries, please re-enter the codes
(916,33).
CAUTION
Do not place objects in front of the unit. The disc tray may collide with
objects when it is opened, and this may cause injury.
( 5 );
________________ '-:::;!J
RQT9243

Disc and card information
----------------_. __ ._ ... _.- •.. _._----------------_._---_ .. __ ._._._----
/
i
,Commercially sold discs
-.
This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that should appear on the
discs and/or packaging.
II,
Indicated as
Type of media
Logo
Features ,
I
BD-Video
~
This format supports High Definition video and audio content
mD
including:
I1lu-r~gDIGc
-BD-Live (BD-ROM version 2Profile 2). This format provides
interactive features when this player is connected to the
Internet via abroadband connection.
BD4i
l".;LI VEn,
-BONUSVIEW allows virtual packages or picture-in-picture
functions to be viewed.
BONUSVIEW'·
DVD-Video
DVD
~
This format supports high quality video and audio playback.
D1!lD!I
... e.e ... ~
VI DEO
CD
mJ~~
Compact Discs (CD's) that contain audio and music I'm
-Operation and sound quality of CDs that do not conform to
DIGfTAL AUDIO CD-DA specifications (copy control CDs, etc.) cannot
be
guaranteed.
-The digital audio content side of aDualDisc does not meet
the technical specifications of the Compact Disc Digital Audio
(CD-DA) format so play may not be possible.
User recorded media
.--
This chart shows the different type of discs recorded with other devices that you can use.
enMtmiMThis mark means you must finalize the disc with the DVD recorder, etc. before playback. For details about finalizing, refer to the
operating instructions for your equipment.
Type
of media
I
Logo
I
Formats
I
Indicated as
BD-RE
~
-Version 3of the BD-RE Recording Format
mD
-JPEG format IImI
I1lu.,-agDlsc
BD-R
~
-Version 2of the BD-R Recording Format 1mB
B/u-rWlgO/sc
DVD-RAM
DYe
-Version 1.1 of the DVD Video Recording Format
~
-JPEG format IImI
RAM
-AVCHD format
Ilrl.'im'J
RAM4_7
DVD-R1RW •DVD-Video Format I!mD
Mi/itt/Fml
ore
ore
-Version 1.1 of the DVD Video Recording Format
~
RRIN
-AVCHD format
BDmJ
R4.7
-IBossl: DivX format (DVD-RW is not supported)
mm
DVD-R DL
DYe
•DVD-Video Format mD!J
.. 11tttII
-Version 1.2 of the DVD Video Recording Format
~
R
-AVCHD format
Ilrl.'im'J
ROL
-180551: DivX format
mm
+R1+RW/+R DL
-+VR (+R/+RW Video Recording) Format
D1!lD!I
emmtmI
-_AVCHD format
BDmJ
CD-R/RW
-CD-DA format I'm
.iMtmiII
-MP3 format
IimD
-
-JPEG format IImI
-l.@.~.J: DivX format
mm
-II may not be possible to play the above discs in some cases due to the type of discs, the condition of the recording, the recording method and
how the files were created.
_When adisc recorded in the AVCHD format is being played, the video may
be paused for afew seconds at portions spliced, due to deletion or
editing.
\'. l
' ........ ....---'/
.'-......._-------_._-_._-_._--_._-------_._-------
RQT9243

SD cards .
--
This chart shows the different type of cards recorded with other devices that you can use.
i•
"Includes miniSD Card and microSD Card
-Please confirm the latest information on the following website.
http://panasonlc.co.jpJpavclglobal/cs
(This site is in English only.)
-When using cards from 4GB to 32GB, only SO cards using the SDHC logo can be used.
-This unit is compatible with SO MemDry Cards that meet SO Card SpecificatiDns FAT12 and FAT16 formats, as well as SDHC Memory Cards in
FAT32 format.
-The card types mentioned above will be referred to as "SD card"
in these operating instructions.
-MiniSD Cards and microSD Cards can be used. but must be used with an adaptor card. These are usually supplied with such cards,
or otherwise customer provided.
-1mI1: To play the virtual package (Q 21). it is recommended that you use acard that supports SD Speed Class Rating Class 2and
has 1GB or more free space.
-Useable memory
is slightly less than the card capacity.
-If the SD card you are attempting to use was formatted Dn a PC. it is possible that the card may not work properly.
-We recommend using aPanasonic SO card.
-Keep the Memory Card Dut Df reach of children to prevent swallDwing.
-When acard recorded
in the AVCHD format is being played. the video may momentarily pause, especially where one recDrding ends
and the
nex1 one begins. This is normal and does not indicate aproblem.
-To protect the card's contents, move the record prevention tab (on the SD card) to "LOCK".
SO Memory Card* (from 8 MB to 2GB)
SOHC Memory Card (from 4GB to 32 GB)
Discs that cannot be played in this unit '
- - - - _¥- . ,- - - - ~
-BD-RE discs (with cartridge)
-2.6 GB and 5.2 GB DVD-RAM
-DVD-RAM that cannot be remDved from cartridge
-3.95 GB and 4.7 GB DVD·R (Authoring)
-Version 1.0 DVD-RW
-+R Bcm (3"), DVD-ROM, CD-ROM, CDV, SACD, Photo CD, MV-Disc
and
PD
-DVD-Audio
-Video CD and SVCD
-WMA discs
-I B035 I: DivX discs
-PAL Discs
-HD DVD
-BD-Video discs recorded at arate of 50 fields/sec
-Any other disc that is not specifically supported
Structure of folders that can be played in this unit
" ~- ..... - ~ ~-- '" --- . ~ ~ --- ~- ~. --~,.
You can play flies on this unit by structure of folders 8S shown below. However depending on the method of writing data (writing
software), play may not be in the order you numbered the folders.
- Folder structure created on aDVD-RAM, BD·RE or an SD card is not displayed.
~ FDlder which can be displayed with this unit
***: Numbers
XXX: Letters
"1 ***: from 001 to 999
"2
***: from 100 to 999
XXX: up
to 5figures
"3 ***
*: from 0001 to 9999
Structure of MP3 folders in CD-R/CO·RW
Prefix the file names with 3-digit numbers in the order you want to play them.
Structure of DivX folders in CD-R/CD-RW/DVD-RlDVD-RW/DVD-R OL I BOSS I
Files inside afDlder are displayed in the order they were updated or taken.
Structures of still picture (JPEG) folders
in CD·R/CD-RW
Files inside afolder are displayed in the order they were updated or taken.
in BD·RElOVD-RAM
-When the highest level folders are "DCIM" folders, they are displayed as apriority in the "Select Folder" screen,
in SO card
-When the highest level folders are "DCIM" folders, they are displayed as apriority in the "Select Folder" screen,
JPEG
DCIM,,**"'
,< ***xxxxx0
2
XXXX****.JPG °3
003XXXX.mp3 P0000003.jpg
004XXXX.mp3 P0000004.jpg
005XXXX.mp3
POOOO005.Jpg
Folder BFolder BFolder B
006XXXX.mp3 POOOOO06.divx POOOOOO6.Jpg
ggh~~~~ ~gg=h~~ ~ggggml~ I
009XXXX.mp3 POOOOO09.divx POOOOOO9.jpg 1
Folder CFolder C . Folder C
010XXX
X.m·" POOOO010.d;vx POOOO010.jpg 01
xx
"" POOOO011.d;" POOOO011.Jpg
'--
O_1_1x_x_._m_
P3
__ -'- P_O_OOO_O_12_.d_;VX __ -'- PO_O_OO_O_12_.j_~ __ --'--"'__ -'- --' 7 /)
012XXXX.mp3 •• ?
RQT9243

Audio and video information
About audio from audio output terminals
-.
Sefore connecting, read the table below, and confirm the desired audio type and necessary sel1ings ("SO-Video Secondary Audio", "Dolby D/Dolby
o+/Dolby TrueHD" or "DTS/DTS-HD"). (~ 9)
•The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT/DIGITAL AUDIO OUT(Coaxial B055 Optical)
5.1ch PCM
7.1ch
PCM"'
1i1'!liI!J: 5.1 ch PCM Down-mixed
2ch PCM
DTS Digital
Surround/
DTS-ES'6
DTS Digital
Surround
Down-niixed
2ch PCM
Dolby Digital7.1ch PCM
7.1ch PCM
1mI1: 7.1ch PCM"
5.1ch PCM'2
Down-mixed
5.1ch PCM'2
DTS Digital
Surround/
DTS-ES
7.1ch PCM
Dolby Digital
Plus
DTS-HD High
Resolution
Audio
Dolby TrueHD
DTS-HDMaster
Audio
DTS Digital
Surround/
DTS-ES'6
DTS Digital
Surround
Down-mixed
5.1ch PCM
AUDIO OUT (Analog)
7.1ch"
Down-mixed
5.1ch*2
7.1ch
7.1ch
5.1ch 2ch
•Also, depending
on the specifications or the settings of the amplifier/receiver, the results of the output may vary.
"1 When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Digital Surround
bitstream
or down-mixed 2ch PCM (e.g., TV).
"2
1mI1: When playing SO-Video without secondary audio or clicking sound, the audio is output as the same format as if "SO-Video Secondary
Audio" was set to "Off".
'3 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
'4 1mI1: When the connected equipment is supported with 7.1 channel surround, the audio output is amplified from 5.1 ch or 6.1 ch to 7,1 ch
depending on the DTS, Inc. specifications.
"5 With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio
decoded as DTS Digital Surround, and DTS-ES recorded to SO-Video becomes PCM audio decoded
as DTS-ES.
'6 miI!i: When "SO-Video Secondary Audio" is set to "On", Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital
Surround, however if playing SO-Video without secondary audio
or clicking sound, the audio is output as the original format.
Enjoying High Bit rate Audio of BD-Video miI!i
-.
This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in
BD-Video.
In order to enjoy these audio formats, the following conditions are necessary. (Part shown in the shaded area of table given above)
NECESSARY CONNECTIONS
•HDMI AV OUT terminal: Connect this unit to your amplifier/receiver supporting HDMI (High Bit rate Audio) using aHigh Speed HDMI cable (~ 11).
•
7.1 ch AUDIO OUT terminal ~: Connect this unit to your amplifier/receiver supporting 7.1 channels using audio cables (~ 12).
NECESSARY SETIINGS (~ 9)
.Set "SO-Video Secondary Audio" to "Off'.
•HDMI
AV OUT terminal: Set "Dolby D/Dolby 0+/Dolby TrueHD" or "DTS/DTS-HD" to "Sitstream" or "PCM" .
•7.1ch AUDIO OUT terminal
"J...Qss:': Set "Analog Audio Output" to "7.1ch".
;'
(8 •The clicking sound on the menu and audio with secondary video in picture-in-picture mode (~ 21) is not output.
1\
~ .. _ ... - ..... _...... --- .. - ..
ROT9243

Regarding 24p output 1mB
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second
in accordance with the display format.
These can be output
in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS
-Connect to aTV supporting 1080/24p input via an HDMI cable.
NECESSARY SETTINGS
-"24p Output"; "On" (~ 32)
Necessary settings
-.--..
After connecting to the terminals, perform necessary settings.
-
PCMo-e-on _
DOwnalI. _
DI Itil AudIo OUtput
."
., ,
"
. ~. '.'
~
~
," ~ "
.' ~"
• ~ 'c. '. •
.~ <~~'J";;;;~;Y'?~,<,,),.:. >
1) While stopped
Press (SETUPj.
2) Press
[.&., ~j to select "Audio" and press [OKj.
3) Press
[.&., ~jto select "Digital Audio Outpuf' and press [OK).
4) Press
["', ~] to select "Dolby D/Dolby D+/Dolby TrueHD", "DTS/DTS-HD",
or "BD-Video Secondary Audio" and press [~, ~1to select the option.
1) While stopped
Press [SETUP].
2) Press [A, ~] to select ''TV /Device Connection" and press [OK].
3) Press [.&., ~] to select "Analog Audio Outpuf' and press [OK].
4) Press
[.&., ~l to select the option and press [OK].
5) Press [OK].
-The channel selling screen is displayed. (~ 34)
-For more information about settings, refer
to page 31, 32, 34.
-When using the different terminal at the same time, the sound may not be output with the desired audio if the setting is incorrect.
In the following case, set "HDMI Audio Output"
to "Off", (~ 32)
-When connecting acompatible amplifier/receiver using 7.1ch AUDIO OUT/5.1 ch AUDIO OUT terminals, and connecting acompatible television
using HDMI
AV OUT terminal
-When connecting acompatible amplifier/receiver using both 7.1ch AUDIO OUT/5.1
ch AUDIO OUT terminals and HDMI AV OUT terminal if
outputting the audio from analog terminals
-When connecting acompatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting acompatible television using HOMI
AV
OUTterminal
To return to the previous screen
Press [RETURNj.
To exit the screen
Press [SETUPj.
RQT9243

Connections
About terminal
_. - - - ,-"- -
-This unit offers several different types of audio and video connections.
-Your TVlreceiver/amplifier mayor may not support all the connections shown.
-If your system does not support HOMI, you will need to select one video connection and one audio connection.
_If your system supports HOMI, this one connection provides both the audio and video connection.
)
XU. _~&
.S3
c- .c 4# _. g .. c
(Video Connections (TV)
-3, 3X "_~, (3 ~;L .•. u U&'" ~ .
-- ... - ... _-_._-----------_ .... _---_ .. __ ._---------------- -----
(
!
I
I
I
Highest
Quality
Standard
Quality
HDMI AVOUT
480p, 720p, 1080i,
1080p
COMPONENT VIDEO OUT
SD-Video: 480i, 480p, 720p,
10801
DVD-Video: 480i, 480p
VIDEO OUT
48Qi
Digital Audio Connections (Receiver/Amplifier)
Highest
Quality Standard
Quality
HDMI AVOUT DIGITAL AUDIO OUT
(COAXIALI B055 VOPTICAL)
Analog Audio Connections (Receiver/Amplifier)
Highest
Quality
Standard
Quality
7.1ch AUDIO OUT \B05SI 5.1ch AUDIO OUT 1
BOSSJ 2ch AUDIO OUT
•Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
•Before making any connections we strongly suggest that all units be temporarily disconnected from AC power.
•Do not connect video signals through avideo recorder. Due to copy guard protection the picture may not be displayed properly
-Non-HDMI-compliant cables cannot be utilized.
-Please use High Speed HOMI Cables that have the HOMIIogo (as shown on the cover). It is recommended that you
use Panasonic's HOM! cable. When outputting 1080p signal, please use HOMI cables 5.0 meters (16.4 tt) or less.
Recommended part number:
RP-CDHG10 (1.0 m/3.3 tt), RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG20 (2.0 m/6.6 tt), Rp·CDHG30 (3.0 m/9.8 ft.), RP-CDHG50
(5.0 m/16.4 ft.), etc.
-This unit incorporates HDMI (Deep color, x.v.Color, High Sit rate Audio) technology. (Q 46, 47)
G
RQT9243 ------

"Connecting to your TV, via HDMI AV OUT
Connecting to atelevision
-"HOMI Video Mode" and "HOMIAudio
Output" should be set to "On".
(~ 32)
-To experience bettersound consider
adding asurround sound receiver, using
connections
0, 0, Gor (i). (~ 12, 13)
-The HOMI connection supports VIERA
Link "HDAVI Control"
(~ 26) when used
with acompatible Panasonic
TV.
HOMI
compatible
television
o
HDMIIN
-IB055~ "Analog Audio Outpuf should be
set to "2ch (Oownmix) +5.1ch".
(~32)
-The Component Video cable does not
carry audio. so you must also connect the
land Raudio channels using the Audio/
Video cable.
-
To experience better sound consider
adding asurround sound receiver, using
connections
0,0, G or Ci). (~ 12,13)
(Unplug the red and white plugs.)
-Connect terminals of the same color.
-Set the "Black level Control" to "Darker".
(~31)
-Using the COMPONENT VIDEO OUT
terminal, while playing OVO-Video, the
video output resolution is limited
to
"480p".
-Be sure your TV supports at least 480p.
Set "Component Video Resolution"
to
"480p", "720p" or "1080i". (~ 32)
-If this unit is connected to an amplifier/
receiver, etc. via
an HOMI cable with
"HOMI Video Mode" set
to "On" (~ 32),
the video will be fixed
to 480i.
-[B055I: "Analog Audio Outpuf' should be
set to "2ch (Oownmix) +5.1ch".
(~ 32)
-Using the two analog audio channels this
connection provides, you will not be able
to use any surround sound audio modes.
-
To experience better sound consider
adding asurround sound receiver, using
connections
0, G, Gor Ci). (~ 12, 13)
(Unplug the red and white plugs.)
-Conneclterminals of the same color.
-High definition video cannot be viewed
using this connection.
To view high
definition video. please use connection
types 0or
0. (0) above)
AUOIONIOEO IN
Television
Back
of the unit
AudloNideo cable (included)I,-=-=-=-,,:==~-
Television
Back of the unit
oConnecting to your TV, via COMPONENT VIDEO OUT
eConnecting to your TV, via VIDEO OUT
2ch AUDIO OUT ~
'-- -----l ---J~
RQT9243

Connections
_ .. - ._------- -._. __ ._--_. __ ._--_._------------------
Connections using a surround sound receiver/amplifier
-- _. -
G) Installation using the HOMI connection
."HDMI Video Mode" and "HDMI Audio Output"
should be set
to "On". (~ 32)
•"Digital Audio Output" :Depending on the
connected amplifier/receiver.
(Q 31)
eThe HDMI connection supports VIERA Link
"HDAVI Control"
(Q 26) when used with a
compatible Panasonic
TV.
eThis unit comes eqUipped with aDolby Digital
Plus, Dolby TrueHD and DTS·HD decoder.
When an amplifier/receiver with
7.1 ch
speakers that supports HOM I(High Bit rate
Audio) is connected using High Speed
HOM I
cable, you can enjoy surround sound
recorded with Dolby Digital Plus, Dolby
TrueHD or DTS-HD. (Q 8)
IIHDMI
~I
compatible
television
.' '" .. - --~1!lIr..l'~II···· .- .. ,
f ) i~~> IWIDitiJid','P '.; .\
... ,. ,i~-:._.../ ...
• :: __ ~.'_. . '--'.< A,
Back of the unit
•
HDMIOUT 8
1~;;:::=====::;;;;;/J\ ~o 0 HOMIIN
HDMI compatible
amplifier/receiver
1- HOMI cable
Multi channel speakers
HDMIIN
eConnecting to 7.1ch AUDIO OUT terminal I BDSS I
."Analog Audio Output" should be set to
'7.1ch".
(~32)
.This unit comes equipped with aDolby Digital
Plus, Dolby TrueHD and DTS-HD decoder.
When connected to acompatible amplifier/
receiver using the 7.1ch AUDIO OUT
terminals, you can enjoy surround sound
recorded with Dolby Digital Plus, Dolby
TrueHD
or DTS-HD.
-When connecting amplifier/receiver or other
devices with HDMI
AV OUT terminal, set
"HOMIAudio
Outpur to "Off". (~ 32)
(Otherwise, depending on the specifications
of connected devices, the audio from AUDIO
OUT terminal may
be output as two channels
only,)
-When connecting a TV (~ 11,0) with HDMI
AV OUT terminal, set "HDMI Audio Output" to
"Off".
(~32)
(Otherwise, the sound may not be output with
the desired audio.)
•Depending
on how the disc was recorded, the
audio may not be output properly on the
number of channels desired.
Cable connections
eSurround back speaker (UR)
oFront speaker (UR)
GSurround speaker (UR)
C!) Center speaker
oSubwoofer
J
Amplifier/receiver with
7.1ch AUDIO IN
Multi channel speakers
•
1.ldl
Back of the unit
.
,
I
~-::----' -
ROT9243

GConnecting to 5.1ch AUDIO OUT terminal I BOSS I•"Analog Audio Output" should be set to "2ch
(Downmix) +5.1ch".
(~32)
•Using this connection. 7.1 channel surround
is mixed down to
5.1 channel audio.
.When connecting amplifier/receiver or other
devices with HDMI
AV OUT terminal, set
"HDMI
AUdio Output" to "Off". (~ 32)
(Otherwise, depending on the specifications
of connected devices, the audio from AUDIO
OUT terminal may be output as two channels
only.)
.When connecting aTV (~ 11,0) with HDMI
AV OUT terminal, set "HDMI Audio Output" to
"Off', (~ 32)
(Otherwise, the sound may not be output with
the desired audio.)
•Depending on how the disc was recorded, the
audio may not be output properly
on the
number of channels desired.
Cable
connections
eFront speaker (UR)
G) Surround speaker (UR)
GCenter speaker
C!) Subwoofer
]
Amplifier/receiver with
5.1ch AUDIO IN
t
Back of the unit
Multi channel speakers
•
~ ==f===~~iiiii~~ii~==ftt;~ Connect Audio
cables to
'-.,. ...... terminals
corresponding
to
the speakers you
have connected.
(I Installation using Coaxial [B1555]/Optical Digital Audio connection
With COAXIAL Coaxial cable
_-II----<C}
-- f--'-'
~qc~~L 0 0 ~PUf~"~oe;,~}
~ :' lbuilt-In decoder or a
Back of the unit decoder-amplifierl
receiver combination
•Please set "Digital Audio Output" to the
connection you will use, coaxial
or optical
digital.
(~ 31)
•When connecting aTV
(~ 11, 0) with HDMI
AV OUT terminal, set "HDMI Audio Output" to
"Off. (~32)
(Otherwise, the sound may not be output with
the desired audio.)
With OPTICAL
Back of the unit
Optical digital audio cable ®
' 0 OP;L1N
~iElil~,.~P,~Lill.iE!i~' ~, lit =f:::::=======~1!'!!t~~...,ill.,xm~!..ij'll
\ i /
., o~=JQ,O, ~P,,~,/~~,e,w~
built-in decoder or a
decoder-ampllflerl
receiver combination
AC power connection .
•For best results this unit should be connected
Cooling fan
directly to an AC outlet.
JI., •. ,,·.~n,'
_""-l.(.,. ... ~
~~Isa
=~:d
•This unit consumes asmall amount of AC
1IIIl:S.16'.·:.,~
86<:;':;>66
power (less than 0.6 W) even when turned off.
_0
0
"!~
00
~g~~~8
In the interest of power conservation, if you
Ctl
will not be using this unit for an extended
Back of the unit
AC power supply cord (inCIUded) __ !period of time, it can be disconnected.
To a household AC outlet +
(AC 120 V, 60 Hz)
AQT9243

Broadband network connection
.By connecting this unit to abroadband connection, this unit can
support the BD-Live feature offered on some movie titles. SO-Live
offers additional interactive media and games that are associated
with the movie title.
(~ 21)
.Once connected to abroadband connection, this unit can also
automatically check for firmware updates.
Firmware updates
-_. -_._~
Occasionally, Panasonic releases firmware updates for this BD
Player. Firmware
is embedded software that controls this unit's
microprocessor. These updates may add or improve afeature of this
unit. Firmware updates may also be released
to correct operating
irregularities that are discovered with certain movies. These updates
are available at no charge.
Internet
Automatically check the firmware .
CTlltlT
-r' nfi I
This unit is capable of auto firmware check if it is connected to the
Internet via abroadband connection.
When latest firmware version is available, the following screen is
displayed.
Select "Yes"
or "No".
.If "Yes" is selected, then follow the on-screen instructions.
-II "No" is selected, then manually update the firmware later.
(~ below)
After the latest firmware is downloaded, the system will be restarted
and the firmware will be updated.
When the system
is restarted, the screen
display disappears and "START"
is displayed
on the unit's display.
After the firmware
is updated and the system is restarted, the
following screen indicates that the firmware update has been
completed.
Back of the unit
Hub or broadband router
(not included)
~.
Straight LAN cable (not includedr--
I
Telecommunications
equipment (modem, etc.)
•After physically connecting.this unit to your broadband connection,
some configuration is required.
(~ 17)
.With installation where your broadband modem is connected
directly
to your PC, arouter must be installed.
-In case all available connection on your router is being used, ahub
or switch can be installed to provide additional connections.
-Use arouter that supports 10BASE-T/100BASE-TX.
•Inserting any cable other than aLAN cable in the LAN terminal can
damage the unit.
•Use only shielded LAN cables when connecting to peripheral
devices.
-During the update process, no other operations can be performed.
Serious damage may occur if you turn the power off and/or press
any buttons.
-Downloading will require several minutes. It may take longer or the
Internet may not be connected depending
on the connection
environment.
It is required that you use abroadband connection.
-When the unit is connected
to the Internet, communication charges
may be generated.
-If you do not want to check for the latest firmware version when the
unit is turned on, set "Automatic Update Check" to "Off'.
(~ 33)
Manually updating the firmware
If the firmware update is not carried out when the unit is turned on, a
message is displayed when displaying the FUNCTIONS menu.
The latest firmware is available.
Please update firmware in Setup.
~'1
. .. J
You can manually update the firmware.
1) Press [SETUP].
2) Press ["', T] to select "Others" and press [OK].
3) Press ["', T] to select "Firmware Update" and press [OK].
4) Press ["', T] to select "Update Now" and press [OK].
5) Press [ .... , ~] to select "Yes" and press [OK].
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn It to aCD-R to update the
firmware.
http://panasonlc.netlsupportl
(This site is in English only.)
AQT9243

Remote control and unit reference guide
r-----II
oTurn the unit on and off (Q 16)
EI TV operation buttons (Q 16)
You can operate the TV through the unit's remote control.
[(!) TV POWER] :Turn the television on and off
[TVNlDEO] :Switch the input channel
[1\ vCH] :Channel select
[+ -VOL] :Adjust the volume
II Open or close the disc tray (q 19)
BNumbered buttons
Select title numbers, etc.lEnter numbers (q 19)
iii Cancel
mBasic playback control buttons (q 19)
DShow status messages (Q 20)
mShow Pop-up menu (Q 19)
Ii) Show Top menu/Direct Navigator (Q 19)
1m Show sub menu (Q 22)
m:I These buttons are used when operating a
BD-Video disc that includes
Java™ applications
(BD-J). For more information about operating this
kind of disc, please read the instructions that came
with the disc.
The [A] and [B) buttons are also used with the ''Title View".
"Picture View" and "Album View" screens (q 22).
IE Show Setup menu (Q 30)
IE Switch on/off Secondary Video (Picture-in-picture)
(Q 21)
1m Transmit the remote control signal
IE Receiver operation buttons (q 16)
You can operate an amplifier/receiver through the unit's
remote control.
[+ -VOL] :Adjust the volume
[MUTING) :Mute the sound
mReproduce more natural audio (Q 20)
mSelect audio (q 20)
IE Show FUNCTIONS menu (q 20)
ml Selection/OK. Frame-by-frame (q 20)
ml Show on-screen menu (Q 28)
II Return to previous screen
~ Select disc drive or SD card drive (Q 19)
11 Switch on/off Secondary Audio (q 21)
CD ~ ~ @@ @~
c~1 ~I~~~I~ I~I :::I::J
~~~~=-=~~9r~ ~1Y'
®®@ Pull to flip down the
front panel.
CD POWER button (POWER 6/1) (~ 16)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming asmall amount of power.
®Display
r:J Disc indicator m SD card indicator
The indicator blinks when reading data from adisc or card, or
writing data to acard.
®Disc tray (~ 19)
@I Bossi: SD Card LED
-It is possible to set the LED to turn on/off. (~ 32, SD Card LED
Control)
®Remote control signal sensor (~ 5)
®SD card slot (~ 22)
(f) Open or close the disc tray (~ 19)
®Stop (~19)
®Pause (Q 19)
®Start play (Q 19)
Rear panel terminals (Q 10-14)
R0T9243

Setting
,------------_.,.,-- -,-,-_._.-
Easy Setting
After connecting your new player and pressing the power button, ascreen for the basic settings will appear.
Preparation
Turn
on the television and select the appropriate video input on the television.
oPress [<!.> BO POWER]. -You can perform this setup anytime by
Sselecting "Easy Setting"
In the Setup
etup screen appears. menu (Q 33)
elf this unit is connected to aPanasonic TV (VIERA} _ You c~n also chan th settin s
supporting HDAVI Control 2or HDAVI Control 3via an HOMI 'd'
'd II ( 32)ge ese g
cable, then the "On-screen Language" and
"TV Aspect" In IVI ua y. Q
setting information on the TV are captured from the TV,
•Follow the on-screen instructions and
make the settings with
[A, T] and [OK].
"On-screen Language". "TV Aspect" and "Analog Audio
Output"IBD551 are set. (Q 32)
Reprogramming the remote control for TV/amplifier/receiver control .
• _ _ ~L ~
You can operate the TV or amplifier/receiver using the unit's remote control.
Point the remote control at the television or amplifier/receiver.
oFor televisions
Input the 4-digit code with the numbered buttons while
pressing [<!.> TV POWER].
For amplifiers/receivers
Input the 4-digit code with the numbered buttons while
pressing [MUTING].
e.g., 0001: [0] 9 [OJ 9 [0] 9 [1]
8Test by turning on the television or adjusting the
volume
of the amplifier/receiver.
-If your television or amplifier/receiver
brand
has more than one code listed,
select the one that allows correct
operation.
-If your television or amplifier/receiver
brand
is not listed or if the code listed
for them does not allow control of your
television or amplifier/receiver, this
remote control is not compatible with
them.
Use their remote control.
-When audio is muted, press (MUTING]
again.
Brand TV Code
j
Brand Amplifier Receiver Code
Code
Panasonic 0308
1308/0039/0367/164112001/
2002
TECHNICS
0308
130810039/0208
BOSE
0674
1229/0639/1253/1933
DENON
1360lO004I0121/0273/1142/
130611311
HARMAN
0110/0189/1289/1306
KARDON
0110/0189/1289/1306
KENWOOD
131310027/004210077/0186
KLH
139011412/1428
LINN
0189
MARANTZ
1189/1269/0039/0189101281
112011289
MClmOSH 0251 1289
NAD
0320
ONKYO
0135103801129811320
PHILIPS
1189/126910189/0391/11201
126611368
PIONEER 0823
102310150/024410531106301
1343/1384
QUASAR
0039
RCA 0823
1023/1609/1254/0054/0530/
0531/107411390/1511
SAMSUNG 1295
SANYO
1251/1469/1801
SHARP
0186/1361
SHERWOOD
0491/0502/1077/1423/1517/
1653
SONY
0815/
1622/015810168/0474/1367/
1126
1529/1658/1758
TEAC
0463/1074/1390
TOSHIBA
0135
YAMAHA
0354
10231017610186/1331
RCA
RUNCO
SAMPO
Brand TV Code
SANSUI
SANYO
SAMSUNG
MITSUBISHI
NORCENT
OPTOMA
ORION
PHILIPS
PHilIPS
MAGNAVOX
PIONEER
POLAROID
PROSCAN
PAOVIEW
SHARP
SONY
SVA
SYLVANIA
TOSHIBA
001410019/009310098/0150/0155/01781
03311035810836/086811250
074lW82411 089
OB87
017!W23&'0463/1463
005410690/1154/1454
002lYlla241OO2&'OO3OtOO3&
0179101861018710230103861069070fJ
080211154/1254/1454
00381016810172/067~0866
07651086511262112761131411316113261
13271132811341/149llJ1523
004710747/1347/1447
083511401/1498
00181OO1~0029/oo381OO47/0090/01351
01741027810679/0747/1047/1147/1247/
1347/1447/1547
0017JOO3O((l2S1104971Olm
0030/0032/003910052/0100/0110/1755
00191llO301'llO3:?178/0329/
040llI042710587107Dm766lO812108141
1080
0463
l1088KJl0710146101541015910232104841
079910893
0039/009310153/0157/016510220/0281/
03861039810491/06881081810851
0000/0011/0080lO111/0273/0353/08101
083410867/1100
0587/0748/0768/0865/08701087110872
0020/002a1OO30/0054IOO65/0096/0171/
0381
SYMPHONIC 0171/0180
SYNTAX-BRILUAN 1007/114411240/125511257/1258/1331
TATUNG 0003/0049/0055/039611101/1756
THOMSON 02091021010047
003610060/014910 154/0 156/0650/08321
084511 15611164/125611265/1356/1656/
1704
ULTRA 0391
VIEWSONIC 0857/0864/0885/1755
WESTINGHOUSE 088MlB89I089O/1282/1577
YAMAHA 0019/0030/0769/0833/0639
ZENITH 00 1610017/0092101781048311265
1088/1089/1101/149411502
0748
001610032/0038/005&009510097/0145/
0151/0173/0227/0279104091041311145
073610736/07 41!U75210781/116411 516
003610053lO069I016010169/018210731/
1253
076510767
0019/0030/0032/0100/017810317/0409/
0442/0457/07001085611178/1265
0136
0020/0024/0028/00301003610054100961
0179/0186/01871023010386/0706108021
125411454
003010054/0444/07041085410855/1154
001610106/0150/015410178/0179/0403
Panasonic 0051/0055/025010650
AOVENT 0761/0783108151081710842
AKAI 0030/009810672/0702/0812
AMERICA ACTION 0180
AOC 0003/0019/0030/0052/0137/0185
APEX DIGITAL 0748/076510767/08791['J}OO
AUDIOVOX 0003/0092/0180104S1/062310802/08751
1937
AXION 1937
BANG & OLUFSEN0620/1620
BROKSONIC 0003/~
CASIO 0611/1205
OAEWOO 0019100391OO661OO871OO911OO9W4S1/
06231066110672/1661
0019/0038/0039/0 154/015810171/0177/
017810179/0180/0181/0182/01 B3I0165/
023610270/0280/0282/0463/0623
0030/0813
083310840
015410159
0179/01861068310809/0853
0021/0027/0029/0047/0051lO055I0135/
013810174/0178m51/0279I028W4S1/
0747/1347/1447
001910030/003210 1 06/0178/0317/0400/
0442/0457/0700/085611178/1265
0886
0768/1034
1348/1351/1352
EMERSON
ENVISION
EPSON
ASHER
FUJITSU
GE
MAGNAVOX
GOLDSTAR
GO VIDEO
HAlER
HANNSPREE
HEWLETI
PACKARD
HI SENSE
HITACHI
INFOCUS
oNC
KlH
LG
LOEWE
~ MARANTZ
~ MEMOREX
AOT;:;:9~24;:;3------------------------------- --_ ~_._._ _-- _. .- - ---

Network settings
--------------------_._--------------
Setting the DNS-IP
- --~ ~ - -
-After checking the specifications for your broadband router, enter
each number. If the number is unknown, then check the number of
other devices such as personal computers connected via aLAN
cable. Assign adiHerent number from those of other devices for the
"IP Address" and the same number for others.
-If awrong number is entered, then press [CANCEL].
-The numeric input range is between 0and 255.
Setting the IP address
oPress [ .... , T] to select "ONS Auto
Configuration (DHCP)" and press
[~, ~] to select "Off".
oPress [ .... , T] to select "Primary
DNS" or "Secondary DNS"and
press [OK].
oEnter numbers with the numbered
buttons and press [OK].
In most cases, default settings can normally be used without making
any changes.
Set the IP address only when the router has no DHCP server
functions or when the router's DHCP server function is disabled.
After performing steps'-0 (¢ left)
oPress [ .... , T] to select "IP Address
Auto Configuration (DHCP)" and
press
[~, ~] to select "Off".
oPress [ .... , T] to select "IP Address",
"Subnet Mask"
or "Default
Gateway" and press [OK].
oEnter numbers with the numbered
buttons and press [OK].
oPress [~, ~] to select "Yes" and
press [OK].
In most cases, default settings can normally be used without making
any changes.
When setting an assigned DNS server from your Internet service
provider, perform the following settings.
After performing steps G-E) (q left)
oPress [SETUP].
8Press [ .... , T] to select "Network"
and press [OK].
6) Press r .... , T] to select "IP Address!
DNS Settings" and press [OK].
oPress [ .... , T] to select "Connection
Test" and press [OK].
These settings are used if you will connect this unit to the Internet.
-The connection to the Internet may take time or the Internet may not
be connected depending on the connection environment. (Q 33)
It is required that you use abroadband connection.
.IPAdd AaJlo ConIIgundlon (DHCP)
:
IPAdd .....
Testing the connection
-- - .
Preparation
-Connect to abroadband network. (Q 14)
Always test the connection when aLAN cable
is connected or when
new "IP AddressJDNS Settings" have been made.
"Testing": The test is in progress.
"Pass": The connection is completed.
Press [RETURN] to exit.
"Fail": Please check the connection and settings.
(~ 36)
-If the connection test fails, it may be necessary to set the MAC
address of this unit
at the router side. The MAC address can be
displayed by pressing [SETUP] and selecting "Network".
oPress [~, ~] to select "Yes" and
press [OK].
-Follow the instructions given by your Internet service provider and
enter the numbers. If the number is unknown. then check the
number of other devices such as personal computers connected via
aLAN cable and assign the same number.
-If awrong number is entered, then press [CANCEL].
-The numeric input range is between 0and 255.
-------------------.---------------------.---- .. -.---.---=R""QT-:'9243

l;.18
""·L~,_./·
RQT9243
Network settings
Setting the connection speed
When the connection test results in "Fail" after the IP and DNS-IP
addresses are assigned, perform the following settings.
After performing steps 0-0 (~ 17)
oPress [ .. , -.] to select" Auto Detect
Connection Speed" and press
[~, ~] to select "Off".
oPress [ .. , -.] to select "Connection
Speed Setting" and press [~, ~] to
select aconnection speed.
-Select aconnection speed in accordance with the environment of
the network connected.
-When the settings are changed. the network connection may be
disabled depending on the device.
Setting the proxy server
. .. -.
In most cases, default settings can normally be used without making
any changes.
Please use this setting when instructed to
by your Internet service
provider.
oPress [SETUP].
f) Press [ .. , -.] to select "Network"
and press [OK].
ePress [ .. , -.] to select "Proxy
Server Settings" and press [OK].
oPress [ .. , -.] to select "Proxy
Address" and press [OK].
oPress [ .. , -.,~,~] to select a
character and press [OK].
Text field: shows the text you have entered
Pro"" Address
Using the numbered buttons to enter characters
e.g., entering. the letter "F"
Jil
l!
3 3 [
33D E F [
[] ill] [[] OJ [
1) Press [3] to move to the 3rd row.
2) Press [3) twice to highlight OF".
3) Press [OK).
Repeat this step to enter other characters.
•Press [II] to delete.
oPress [.] when you complete the
entry.
GPress [ .. , -.] to select "Proxy Port
Number" and press [OK].
oEnter numbers with the numbered
buttons and press [OK].
oPress [~, ~] to select "Yes" and
press [OK].
-The specified ports may be blocked and not be able to be used
depending on the network environment.
In order to restore the default settings
After performing steps o-e
1) Press [.A., "'j to select "Reset to factory preset" and press [OK).
2) Press [..., .. )to select "Yes" and press [OK].

Basic play (Playing video contents)
---------------_._------------------------------ ..........
wwm. )
.,,-_ ..$
nc!&!!Si&._ZS&&.aa~
.•. , .~. $ .. -
Direct Play
SLOW/SEARCH
~ ~ Search/Slow-motion
The stopped position is memorized.
-Press
[II] again or [~] (PLAY) to restart play.
Skip to the title, chapter or track you want to play.
•Each press increases the number of skips.
-1!llD: Backward direction [ ~ Ionly.
During playback, you can access specific recordings or scenes
through direct entry of the numbered buttons.
Play starts from the selected title or chapter.
ImDI mmm I!m'D
e.g., 5: [0] Q[a] Q [5] e.g., 5: [0] Q [5J
15: [0] Q [1] Q [5] 15: [1] Q [5]
-While stopped (the image on the right is
displayed on the screen), the title is designated.
While playing, the chapter
is designated.
Slow-motion
While paused, press [......jor (~~ j.
slmDl rJBIl]: Forward direction [~~l only.
-~: If continued for approx. 5minutes, slow-motion play
pauses automatically.
!'Ii""
Other operations during play
(These functions may not work depending on the diSC.)
- - -- -- ~ -
The speed increases up to 5steps.
-Press [~] (PLAY) to revert to normal playback speed.
-For some discs, the speed may not change.
Search
While playing, press [......]or [~~ I.
-1mDI1F..i.'l'!'mlD I!ED 1!m'D:
Audio is heard during first level of forward search.
sl!llD: Audio is not heard during all levels of search.
-e:J miD: The speed is fixed to asingle step.
Resume play function
Press [~ I(PLAY) to restart from this position.
sThe position is cleared if the tray is opened
or you press r-] several
.times to display "STOP" on unit's display.
slmDl: On BD-Vldeo discs Including BD-J (~ 46), the resume
playfunction does not work.
se:J miD 1!llD: The position is cleared if the unit is turned off.
[ I "i" IStop
[
,....SKIP .... )
~ ~
Skip
_ .S&S
sauusx x&3 AX·
[ 1 "Ii'l Pause
J .... L-WiJi.&£E£239 ttiM
• 1111
.~z.
8, 2 WS. ,_. 9¥L ... p,_X
Instructions for operations are generally described using the remote
control in these operating instructions.
1!llD: [B05SI only
Preparation
Turn on the television and select the appropriate video input on the
television.
ImDI rJBIl] I!ED I!m'D
Press [TOP MENU/DIRECT NAVIGATOR].
The Pop-up menu is aspecial feature available with some BD-Video
discs. This menu may vary with discs. For the operating method, refer
to the instructions for the disc.
1) Press [POP-UP MENU].
2) Press [.&,
T, ... , ~] to select the item and press [OK].
sPop-up menu also appears by pressing [SUB MENU] and selecting
"Pop-up Menu".
-Press [POP-UP MENU] to exit the screen.
BO
~
@'----i---<O
Ciftit.UC6C
&-+~
[I] [2] raJ
[4](53ffiJ
CZJ[ID[ID
[Q]
8'8r[~r8
~rm~
oPress [<9 BD POWER] to turn on the
unit.
f) Press [ ..... OPEN/CLOSE] to open the
disc tray and insert the disc.
slnsert double-sided discs so the label for e.g.,
the side you want to play is facing up.
sDVD-RAM: Remove discs from their
cartridges before use.
-Press the button again to close the tray.
Play starts.
-If the menu is displayed, press [.&, T, ..., ~] to select the item and
press [OK].
-If the screen prompting you to use the color buttons appears,
continue to operate with the color buttons on the remote control.
-DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED.
Press [_I when you have finished playback to protect the unit's
motor, your television screen and so on.
-The producers of the disc can control how discs are played. So you
may not always be able to control playas described in these
operating instructions. Read the disc's instructions carefully.
-When playing aset of two or more BO-Video discs, the menu
screen may continue to display even if the disc has been ejected.
C To sWitc~ dr~v~s 2 c. &£C&. __ SkQJ.a::& At L. •• m)
Press [BD/SD] to select "BD" to playa disc.
-If adisc or an SO card is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.
( To display menus
(
To show Pop-up menu ImD )
.2s_ tL Ga. S SiS sa _!.~&j x.
RQT9243

Basic play (Playing video contents)
Frame-by-frame
UDIO Changing audio during play
The status messages give you information about what is currently
being played. Each time you press [STATUS], the information
displayed will change.
~
"AudioLR" is -
selected
-~
Reproducing more natural audio
(Discs recorded at 48 kHz or less)
RE·MASTER
o
il~TOPMenU
ii.+ \Jli\"
---_.-
Bll Pilyer FlINCTlONS
@OYD·Video
Showing FUNCTIONS menu
.-.
Select the one that you like best.
oPress [FUNCTIONS].
•Items to be displayed may vary with the media.
ePress [A, T] to select the item and
press [OK].
e.g .•
This feature gives you a more natural sound by adding higher
frequency signals not recorded on the track.
Press [RE-MASTER) to select "Re-master 1", "Re·master 2"
or
''Re-master 3".
m!Drmmllmlm!l
e.g.1mlm!I
~ II!l!EJfffiSEtill§-1
I
English is selected.
You can change the audio channel number each time you press the
button. This allows you to change the soundtrack language
(~ 28,
Soundtrack), etc.
DmBJDJl!EI
AudioLR-.AudioL-.Audio R
tI
e This function IS effective for audIo from the HDMI terminal or the
DIGITAL AUDIO
OUT terminal only when "Dolby D/Dolby 0+/Dolby
TrueHD"
or "DTS/DTS-HD" is set to "PCM". (However, in this case,
audio is output as 2ch from the DIGITAL AUDIO
OUT terminaL)
Some functions of this unit can be operated from the FUNCTIONS
menu.
When playing LPCM sound Other types of
Setting Type of music sound
Effect level
Re-master 1High
tempo (e.g., pop and Light
rock)
Re-master 2Various tempos (e.g., jazz) Medium
Re-master 3
Low tempo (e.g., classical) Strong
Off Off Off
Items
change
depending on the
disc played.
Current position
PL: Playlist
T: Title
C:
Chapter
r
l
No display
While paused, press [
.... ] ( .... 11) or [~] (II~).
Each press shows the next frame.
-Press
and hold to change in succession forward or backward.
-Press
[~) (PLAY) to revert to normal playback speed.
-m!D rmmJ: Forward direction [~] (II~) only.
When black bars are shown at the top, bottom, left, and right sides of
the screen, you can enlarge the image to fill the screen.
<D Press [SUB MENU].
®Press lA, ~) to select "Screen Aspect" and press [OK).
@Press [ .... , ~) to select "Side cut" or "Zoom".
Normal: Normal output
Side cut: The black bars
on the right and left sides of the 16:9
image disappear and the image is enlarged. Please note
that the right
and left sides of the image are cut off when
the black bar is not displayed.
Zoom:
The black bars on the top and bottom sides of the 4:3
image
disappear and the image is enlarged. Please note
that the
top and bottom sides of the image are cut off
when the black
bar is not displayed.
-m!D 1mlm!I: "Side cut" does not have any effect.
-When 'TV Aspect" (~ 32) is set to "4:3 Pan &Scan" or "4:3
Letterbox", the "Zoom" effect is disabled.
e.g. m!D
(Screen Aspect
,.~.~ ~., __ ", J
[...." .... k""'? .... TAT"""US.....,..~s=ta ... t",.u.",,:_p:~e ... ~s=_:=_~"": ... ~ ....... "' ... 0 .... ..... w"".Q_.< ..... _. ,""'''''''"' .. ,.,)
Depending on the kind of disc or the playback status, this
display may not appear. !
i .. , -, •
i.·tUZD
eTop Menu
eMenu
ePlayback
-SO card
-BD/DVD/CD
- Other Functions
20 ;
RQT9243
Switches to the SO drive.
Switches to the disc drive.
"Playlists":
You can play playlists created on DVD·VR.
Press
[A, ~, .... , ~] to select the playlist and
press [OK]. J
"Setup" (~ 30)
"Card Management"
(~ 21)
~ .• _~ ..... __ ._ .. _--_._------_ .. __ .. _._---- ------_._---- --.-- --- ----