Panasonic Digital Palmcorder PalmSight PV-DV600 User manual

Digital Palmcorder® Panasoni C
PalmSight”
Digital Video Camcorder
Operating Instructions
Model No. PV-DV600
Before attempting to connect, operate or adjust this product, please read these
instructions thoroughly.
Spanish Quick Use Guide Is included.
Guía para rápida consulta en espanol está incluida.
For assistance, call 1-800-211-PANA(7262)
LSGTO213A

Things You Should Know E
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable products on the market
today. Used properly, we're sure it will bring you and your family years of enjoyment.
Please take time to fill in the information below. The serial number is on the tag located on
the underside of your Palmcorder. Be sure to retain this manual as your convenient
Palmcorder information source.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Unpack your Camcorder
1 pc. AC Adaptor (PV-DAC10) 1 pc. Battery Pack 1 pc. A/V Cable
with AC Cable and DC Cable (PV-DBP8 or PV- (LSJA0280)
DBP8A)
1 pc. Lens Cap 1 pc. Color 1 pc. PC 1 pc. CD-ROM of
(LSYFO395) Enhancement Light Connection Cable Driver for Adobe
(VYKW3130) with for Windows PhotoDeluxe
Light Holder (LSJA0276) (VFTWO014)
- 89
1 pc. PHOTOVU 1 pc. MultiMediaCard 1 pc. Shoulder
LINK DRIVER & (LSFT0198) Strap (LSFC0013)
CARD LINK DRIVER
(LSFTO196)
Q E
Microsoft and Windows are registered trademarks of Microsoft in the United States and
other countries.
Adobe, the Adobe logo & PhotoDeluxe are trademarks of Adobe Systems Inc.
2 For assistance, call 1-800-211-PANA(7262)

Things You Should Know
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Your “fy” Palmcorder is designed to record and play back in Standard Play (SP) mode
and Long (LP) mode.
It is recommended that only cassette tapes that have been tested and inspected for use in
VCR machines with the yaik: mark be used.
G)
D
zi
=)
(©
y)
ste
B
S
©
o
This symbol warns the user that uninsulated
CAUTION voltage within the unit may have sufficient
RISK RISK OF ELECTR SHOCK ELECTRIC SHOCK magnitude to cause electric shock.
ar NOT OPEN Therefore, it is dangerous to make any kind
of contact with any inside part of this unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, This symbol alerts the user that important
DO NOT REMOVE COVER (OA BACK) literature conceming the operation and
NO USER-SERVICEABLE PARTS INSIDE maintenance of this unit has been included.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Therefore, it should be read carefully in orde
to avoid any problems.
The above markings are located on the appliance bottom cover.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful
interference when operated in a residential environment.
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, use the equipment in another location
and/or utilize an electrical outlet different from that used by the receiver.
If necessary, consult the dealer or an experienced radio/TV technician for help. You may
find the booklet, ‘Something About Interference’ available from FCC local regional offices
helpful.
FCC Warning: To assure continued FCC compliance, use only the provided shielded
interface cable when connecting digital video camera to computer in
accordance with instruction herein. Also, any unauthorized changes or
modifications to this equipment could void the user's authority to operate.

Important Safeguards
10.
Read Instructions — All the safety and operating
instructions should be read before the unit is
operatad.
Retain Instructions — The safety and operating
instructions should be retained for future reference.
Heed Wamings — All wamings on the unit and in the
operating instructions should be adhered to,
Follow Instructions — All operating and maintenance
instructions should be followed.
Cleaning — Unplug this video unit from the wall outlet
before cleaning. Do not use liquid or aerosol
cleaners. Use a dry cloth for cleaning.
Attachments — Do not use attachments not
recommended by the video product manufacturer as
they may be hazardous.
Water and Moisture — Do not use this video unit near
water — for example near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, and the like.
Accessories — Do not place this video unit on an
unstable cart, stand, tripod, bracket, or table. The
video unit may fall, causing serious injury to a child or
adult, and serious damage to the unit. Use only with
a cart, stand, tripod, bracket, or table recommended
by the manufacturer, or sold with the video unit, Any
mounting of the unit should follow the manufacturer's
instructions and should use a
mounting accessory
recommended by the
manufacturer. An appliance and
cart combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance and cart
combination to overtum.
. Ventilation — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the video unit and to protect it from
overheating. These openings must not be blocked or
covered. Never place the video unit on a bed, sofa,
rug, or other similar surface, or near or over a radiator
or heat register. This video unit should not be placed
in a built-in installation such as a bookcase or rack
unless proper ventilation is providad or the
manufacturer's instructions have been adhered to.
Power Sources — This video unit should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer
or loca! power company. For video units intended to
be operated from battery power, or other sources,
refer to the operating instructions.
11.
12.
13.
14.
Grounding or Polarization — This video unit may be
equipped with either a polarized 2-wire AC
(Alternating Current) line plug (a plug having one
blade wider than the other) or 3-wire grounding type
plug, a plug having a third (grounding) pin.
The 2-wire polarized plug will fit into the power outlet
only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. if the plug still fails to fit, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
The 3-wire grounding type plug will fit into a
grounding type power outlet. This is a safety feature.
if you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding type plug.
Power-Cord Protection — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords of
plugs, convenience receptacles, and the point
where they exit from the unit.
Outdoor Antenna Grounding — If an outside
antenna or cable system is connected to the video
unit, be sure the antenna or cabla system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Part 1 of
the Canadian Electrical Code, in USA Section 810
of the National Electrical Code, provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
POWER SERVICE GROUNDING
*— 7 ELECTROOE SYSTEM
C ART
NEC - NATIONAL ELECTRICAL COOE 250, PART H)
Lightning — For added protection of this video unit
receiver during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the video unit due to lightning and power-line
surges.
For assistance, call 1-800-211-PANA(7262)

Important Safeguards
15. Power Lines — An outside antenna system should b. If any liquid has been spilled onto, or objects have
not be located in the vicinity of overhead power lines fallen into the video unit,
or other electric light or power circuits, or where it can c. If the video unit has been exposed to rain or water.
fall into such power lines or circuits. When installing d. If the video unit does not operate normally by
an outside antenna system, extreme care should be following the operating instructions. Adjust only
taken 19 keep from acning Susi power Hnes OF those controls that are covered by the operating
circuits as contact with them might be fatal. instructions, as an improper adjustment of other
16. Overloading — Do not overload walt outlets and controls may result in damage and will often
extension cords as this can result in a risk of fire or require extensive work by a qualified technician to
electric shock. restore the video unit to its normal operation.
17. Objects and Liquids — Never push objects of any e. If the video unit has been dropped or the cabinet
kind into this video unit through openings as they has been damaged.
may touch dangerous voltage points or short out f. When the video unit exhibits a distinct change in
parts that could result in a fire or electric shock. performance — this indicates a need for service.
Never spill liquid of any kind onto the video unit.
20. Replacement Parts — When replacement parts are
18. Servicing — Do not attempt to service this video unit P B E
required, be sure the service technician has used
yourself as opening or removing covers may expose replacement parts specified by the manufacturer or
you iw dangerous voltage or other hazards. Refer all have the same characteristics as the original part.
servicing to qualified service personnel. Unauthorized substitutions may result in fire, electric
19. Damage Requiring Service — Unplug this video unit shock or other hazards.
ITO (DB wall nri and kaa: eir to qualified 21. Safety Check— Upon completion of any service or
service personnel under the following conditions: repairs to this video unit, ask the service technician to
a. When the power-supply cord or plug is damaged. perform safety checks to determine that the video
unit is in safe operating order.
Precautions
USE & LOCATION
* TO AVOID SHOCK HAZARD ... Your Camcorder and power supply should not be exposed to rain or moisture. Do
not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed for
outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a direct
splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of your
Camcorder. Do not attempt to disassemble this unit, There are no user serviceable parts inside. Unplug your
Camcorder from the power supply before cleaning.
* DO NOT AIM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS
* DO NOT LEAVE THE PALMCORDER WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE
DAMAGE TO THE INTERNAL PARTS OF THE EVF
* DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, in direct sunlight,
inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your
Camcorder.
* AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is suddenly moved from a cold place to a warm
place, moisture may form on the tape and inside the unit.
* DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.
* STORAGE OF YOUR CAMCORDER ... Store and handle your Camcorder in a manner that will not subject it to
unnecessary movernent (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which
could be damaged by improper handling or storage.
CARE
* TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder
body.
* TO PROTECT THE LENS ... Do not touch the surface of the lens with your hand. Use a commercial camcorder
lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.
* TO PROTECT THE FINISH OF YOUR CAMCORDER ... Before handling your Camcorder, make sure your hands
and face are free from any chemical products, such as suntan lotion, as it may damage the finish.
5
Q)
D
=>
-
Q
o
=>
c
kan 1
e
(D
o

Table of Contents
Getting Started
Things You Should KNOW nl os 2
Important Saléguarmds adi di AE E ES 4
Preca le Ta cm 5
Quick GUJE "TC 8
Supplylng TET E E A tie 11
TTT LB IO eT eT 14
ero sido ninia ia rei ZR ar 16
Attaching the Shoulder Strap aora seda tura rra coin asad aaraa aTAKSio ses 17
Setting the SON a a 19
Using me Palmcorder Menu isis ica 20
MENU OSD. MM nstd AAA 21
Electronic Viewfinder/LCD Monitor Indications sss sss sees sees eee ee eee 26
Basic Operation
Camera < Tee eis H AAA 30
Remote Control (Optional) sss sese liinda 34
Playback Your Recordings AAA A A olapessabentnayhatavers 35
Special Features
so A A NI 41
Recording images From a Jape coin aia 42
Plavback -Shll Images... osos aldo 43
Delete Specific Image Pages .............. rrr retten ruote tour ana tera tica ener ka rra aai nen 45
Delete. AIT image: Pages nadia do 46
Format the MultiMediaCard ¿iii aire 47
PBOLO- TO A abans 48
Dual Digital Electronic Image Stabilization System (D.E.1.S.) ...................................ss. 50
A ZN or TRT aR ETRE ead TRER Ray ge onsec TER UN s 51
Digital PROS a asi T 52
Index- 5 cipe PATCH 52
White Balanca PEA E cadet e Eu ae ence ne ra dickob spi: 53
Recording Still PICDUEBS satin r acp eer PNE act ec bus Pensa Rue ia etra rien Erde E XD PIENO RA 53
INELTER E ——————————— — E 53
PROGRA AE A do tee ismod eee cere End EID C s hes Crue desde secs 54
Digital iacit 55
FOCUS Or caia 56
Audio/Video: Fade Te 57
o A O 57
High Speed ShullBE. acera id ti ake Bid 58
Audio Dubbing using the External or Built-in Microphone .......ooooooccccccnnocconcconncnonaranonccnnos 59
Meinory-Stop Editing sss dsd di add 60
Copying your Tapes to S-VHS or VHS Cassette eee 61
Copying S-VHS or VHS Cassette to your Tapes sese eee 62
Copying from Digital Equipment (dubbing) «0.00... sees eee eee 63
PC Connection with DV Interface Cable (IEEE 1394) see eee eee enen 64
XC i ein PD EN 65
Software Installation (Windows 95/99)... ee 66
CARD CIN ai ia TT 67
PHOTOVUELINK:. aria a 70
Adobe® PhotoDeluxe” HE 3.0 inci 72
A A A erint iba 73
6
For
assistance,
call
1-800-211-PANA(7262)

Table of Contents
For Your Information Y
Palmcorder Accessory System c coin d eee italia ds 74 z1
Palmcorder Accessory Order Form sse essere esse ereer 75 =
Notes On ODGralofis titi da iia dd 76 Me
Tee 1 el soos Aqua rd A A A di T a aa eda 78 "7^
Before Requesting Service iii X——— 79 c
Request for Service Noise... 80 =
Index of Controls ar A A dTie 81 ep
icq, M ———————P—ÀÁ— À—€ 86 D
Spanish Quick Use Guide/Guía Para Uso Rápido ......................... essere 88
[io qct MS 91

Quick Guide
Insert the Battery -:
Before you begin...
e Charge the Battery (page 11).
1 Slide the Viewfinder
backward to its fully
LT ~ N
Protection Film |
expanded position and then
tilt it upward.
: E 2 2 Insert the Battery and slide it down
Remove the Protection Film before use. util it locke with a click,
Insert Cassette
1 Set POWER Switch to 2 Slide TAPE EJECT 3 Insert a cassette with its
VCR or CAMERA. Switch to open the window side facing up.
Cassette Compartment
* Make sure the record tab
is closed (page 15).
>
OFF CAMERA
Protection Film
* Remove the
Protection Film
before use.
bI |
PUSH TO bn: à
CLOSE mark
4 Press PUSH TO CLOSE mark to
close the Cassette Compartment
Cover.
When using a Tape, you must set TAPE/M-CARD
Switch to TAPE.
For assistance, call 1-800-211-PANA(7262)

Camera Recording 2
When the LCD monitor is fully open, the Adjust the Vision
Viewfinder automatically turns OFF. Adjustment Control
Protection
Film
to
your
eyesight.
Viewfinder
* Remove the Protection Film before use.
1 Set POWER Switch
to CAMERA.
LCD Monitor
3 Press LCD-OPEN Button to
unlock the LCD monitor.
Swing it fully open and 4
adjust the angle. Press RECORD/PAUSE Button
to start recording.
Press RECORD/PAUSE Button
Insert MultiMediaCard again lo pause recording.
Be sure to insert the MultiMediaCard before using the Card PhotoShot (page 41).
M-CARD Door
1 Press LCD-OPEN Button to
unlock the LCD monitor.
Swing it fully open and
adjust the angle.
2 Slide CARD
EJECT Switch to
open M-CARD
door.
LCD Monitor
4 Close the M-CARD Door.
TAPE
Bl When using a MultiMediaCard, you must set
M-CAR TAPE/M-CARD Switch to M-CARD.
Q)
(D
=
=
=|
e
o
p
Rt
im 4
mp
D
[e]

UN EAN EVI EIA Mier] Before you begin...
(Liquid Crystal Display) * Charge the Battery (page 11).
When the LCD monitor is fully open, the
Viewfinder automatically turns OFF.
9
md I e a:
Set POWER Switch
2 Press LCD-OPEN Button to unlock
the LCD monitor. Swing it fully open
and adjust the angle.
3 Press REW Button to 4 Press PLAY Button to
rewind the tape. start playback.
E—————
5 Press STOP Button
to stop playback.
= [helen | |
ose
10
For
assistance,
call
1-800-211-PANA(7262)