Panasonic HDC-TM99 User manual

Operating Instructions
High Definition Video Camera
Model No. HDC-SD90
HDC-SD99
HDC-TM99
Before use, please read these instructions completely.
VQT3J83
until
2011/1/24

- 2 -
∫About the recording format for
recording motion pictures
You can select from AVCHD, 1080/50p or
iFrame recording formats to record motion
pictures using this unit. (l41, 52)
AVCHD:
You can record high definition quality images
with this format. It is suitable for viewing on a
large format TV or for saving to disc.
1080/50p:
This is a 1080/50p (1920k1080/50
progressive) recording mode that can record
in maximum quality*. 1080/50p motion
pictures can be saved and played back with
this unit or the HD Writer AE 3.0.
* This means the highest quality for this unit.
iFrame:
This is a recording format suitable for
viewing and editing on a Mac (iMovie’11).
Using iMovie’11, iFrame motion pictures can
be imported faster than AVCHD motion
pictures. Also, the imported file size of
iFrame motion pictures will be smaller than
that of AVCHD motion pictures.
≥It is not compatible with motion pictures
recorded in AVCHD or 1080/50p format.
∫Indemnity about recorded
content
Panasonic does not accept any
responsibility for damages directly or
indirectly due to any type of problems that
result in loss of recording or edited content,
and does not guarantee any content if
recording or editing does not work properly.
Likewise, the above also applies in a case
where any type of repair is made to the unit
(including any other non-built-in memory
related component).
∫Handling of built-in memory
[HDC-TM99]
This unit is equipped with the built-in
memory. When using this component, pay
attention to the following points.
Back up data periodically.
The built-in memory is temporary storage. In
order to avoid erasing data due to static
electricity, electromagnetic waves,
breakage, and failures, back up the data to a
PC or DVD disc. (l98, 110)
≥Access lamp [ACCESS] (l8) illuminates
while the SD card or built-in memory is
being accessed (initialization, recording,
playback, deleting etc.). Do not perform
the following operations when the lamp
illuminates. It may damage the built-in
memory or cause a malfunction in the unit.
jTurn the unit off (remove the battery)
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
≥About disposing of or giving away this unit.
(l135)
∫Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card
and SDXC Memory Card
≥4 GB or more Memory Cards that do not
have the SDHC logo or 48 GB or more
Memory Cards that do not have the SDXC
logo are not based on SD Memory Card
Specifications.
≥Refer to page 12 for more details on SD
cards.
Information for Your Safety

- 3 -
∫For the purposes of these
operating instructions
≥SD Memory Card, SDHC Memory Card
and SDXC Memory Card are referred to
as the “SD card”.
≥Function that can be used for motion
picture recording mode:
Function that can be used for still picture
recording mode:
≥Function that can be used for motion
picture playback mode:
Function that can be used for still picture
playback mode:
≥Pages for reference are indicated by an
arrow, for example: l00
These operating instructions are designed
for use with models ,
and . Pictures
may be slightly different from the original.
≥The illustrations used in these operating
instructions show model ,
however, parts of the explanation refer to
different models.
≥Depending on the model, some functions
are not available.
≥Features may vary, so please read
carefully.
≥Not all models may be available
depending on the region of purchase.

- 4 -
Information for Your Safety......................2
Preparation
Parts identification and handling ............ 6
Power supply............................................. 9
Inserting/removing the battery............. 9
Charging the battery ......................... 10
Charging and recording time............. 11
Recording to a card ................................ 12
Cards that you can use
with this unit ...................................... 12
Inserting/removing an SD card.......... 13
Turning the unit on/off............................ 14
Turning the unit on and off
with the power button ........................ 14
Turning the unit on and off
with the LCD monitor......................... 14
Selecting a mode ....................................15
How to use the touch screen .................16
About the touch menu ....................... 17
Setting date and time..............................18
Basic
Before recording ..................................... 19
Selecting a media to record
[HDC-TM99] .............................................20
Recording motion pictures ....................21
Recording still pictures .......................... 23
Recording still pictures
in motion picture recording mode...... 24
Intelligent auto mode.............................. 25
Motion picture/Still picture playback ....27
Using the menu screen ..........................30
Using the Setup Menu ............................31
Advanced (Recording)
Zoom in/out function .............................. 39
Extra optical zoom ............................ 39
Image stabilizer function........................ 40
1080/50p recording ................................. 41
Recording with the touch function ....... 42
Touch function icons ......................... 42
Recording functions
of operation icons .................................. 45
Operation icons................................. 45
Recording functions of menus.............. 51
Manual recording.................................... 65
White balance ................................... 66
Manual shutter speed/
iris adjustment................................... 67
Manual focus adjustment .................. 68
Recording 3D video ................................ 69
Functions not available
during 3D recording .......................... 71
Advanced (Playback)
Playback Operations .............................. 72
Motion picture playback
using operation icon.......................... 72
Creating still picture
from motion picture ........................... 73
Highlight&Time frame index.............. 74
Repeat playback ............................... 74
Resuming the previous playback ...... 75
Zooming in on a still picture
during playback (Playback zoom)..... 75
Various playback functions ................... 76
Playing back motion pictures/
still pictures by date .......................... 76
Highlight playback............................. 77
Changing the playback settings and
playing back the slide show .............. 79
Contents

- 5 -
Deleting scenes/still pictures ................81
Dividing a scene
(AVCHD, 1080/50p) .......................... 82
Dividing a scene to partially delete
(iFrame) ............................................ 83
Deleting personal information ........... 84
Protecting scenes/still pictures.......... 84
DPOF setting ........................................... 85
Relay scene combining
[HDC-TM99] .............................................86
Watching Video/Pictures on your TV .... 88
Connecting with
a HDMI mini cable............................. 91
Connecting with
the AV multi cable ............................. 91
Playback using VIERA Link ...................92
3D video playback...................................94
Functions not available during
3D playback ...................................... 95
Copy/Dubbing
Copying between SD card and
Built-in Memory [HDC-TM99] .................96
Connecting a DVD burner to copy to/
play back a disc ......................................98
Preparing for copying/playing back... 98
Copying to discs.............................. 100
Playing back the copied disc........... 102
Managing the copied disc ............... 103
Dubbing with a Blu-ray disc recorder,
video device, etc. .................................. 104
3D video storage ................................... 108
With a PC
What you can do with a PC.................. 110
End User License Agreement......... 112
Operating environment ........................ 113
Installation............................................. 116
Connecting to a PC .............................. 118
About the PC display ...................... 120
Starting HD Writer AE 3.0..................... 121
Reading the operating instructions
of the software applications ............ 121
If using Mac ........................................... 122
Others
Indications............................................. 123
Messages .............................................. 126
About recovery................................ 127
Troubleshooting ................................... 128
Cautions for use ................................... 134
About copyright.................................... 140
Recording modes/approximate
recordable time ..................................... 141
Approximate number of recordable
pictures.................................................. 142
Optional accessories ........................... 143

- 6 -
1 Power button [ ] (l14)
2 Shoe adaptor release lever
[SHOE ADAPTOR RELEASE] (l143)
3 USB terminal [ ] (l99, 104, 118)
4 Intelligent auto/Manual button
[iA/MANUAL] (l25, 65)
5 Optical image stabilizer button
[ O.I.S.] (l40)
6 1080/50p button [1080/50p] (l41)
7 Battery release lever [BATT] (l9)
8 HDMI mini connector [HDMI]
(l88, 92)
9 AV multi connector [AV MULTI] (l88,
107)
≥Use the AV multi cable (only the supplied
cable).
10 Microphone terminal [MIC]
≥A compatible plug-in powered microphone
can be used as an external microphone.
≥Audio will be stereo (2 ch) with the
external microphone input.
≥(Microphone input level
meter) is displayed when the external
microphone is connected. (l59)
≥When the unit is connected with the AC
adaptor, sometimes noise may be heard
depending on the microphone type. In this
case, please switch to the battery for the
power supply and the noise will stop.
Preparation
Parts identification and handling
2
4
5
6
3
7
1
MIC
AV MULTI
9
810

- 7 -
11 Speaker
12 Lens cover
≥The lens cover opens in motion
picture recording mode or still picture
recording mode. (l15)
13 Built-in flash (l48)
14 Step up ring attachment part
(concave)
15 Lens
16 Internal stereo microphones
17 Video light (l50, 64)
18 Shoe adaptor mounting part
[SHOE ADAPTOR] (l143)
19 Status indicator (l14)
20 Recording start/stop button (l21)
21 LCD monitor (Touch screen) (l16)
≥It can open up to 90o.
≥It can rotate up to 180oAtowards the lens
or 90o B towards the opposite direction.
22 Battery holder (l9)
11
12
13
14
15
16
17
18 19 20
2221
Due to limitations in LCD production
technology, there may be some tiny bright
or dark spots on the LCD monitor screen.
However, this is not a malfunction and
does not affect the recorded picture.


- 8 -
23 Tripod receptacle
≥If you attach a tripod which has 5.5 mm
screw or larger, it may damage this unit.
24 SD card cover (l13)
25 Access lamp [ACCESS] (l13)
26 Card slot (l13)
27 Photoshot button [ ] (l23)
28 Zoom lever [W/T] (In motion picture
recording mode or still picture
recording mode) (l39)
Thumbnail display switch [ / ]/
Volume lever [sVOLr] (In playback
mode) (l28)
29 Mode switch (l15)
30 Grip belt
Adjust the length of the grip belt so that it fits
your hand.
1Flip the belt.
2Adjust the length.
3Replace the belt.
31 DC input terminal [DC IN] (l10)
≥Do not use any other AC adaptors except
the supplied one.
24
23
25
26
28
27
30
31
29




- 9 -
∫About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBK180/VW-VBK360.
≥The unit has a function for distinguishing batteries which can be used safely. The
dedicated battery (VW-VBK180/VW-VBK360) supports this function. The only
batteries suitable for use with this unit are genuine Panasonic products and
batteries manufactured by other companies and certified by Panasonic. (Batteries
which do not support this function cannot be used). Panasonic cannot in any way
guarantee the quality, performance or safety of batteries which have been
manufactured by other companies and are not genuine Panasonic products.
Inserting/removing the battery
≥Press the power button to turn off the unit. (l14)
Install the battery by inserting it in the direction shown in the figure.
Preparation
Power supply
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not liable
for any accident or failure occurring as a result of use of a counterfeit battery pack.
To ensure that safe products are used we would recommend that a genuine
Panasonic battery pack is used.
Removing the battery
Be sure to hold down the power button until
the status indicator goes off. Then remove
the battery while supporting the unit to
prevent it dropping.
Move the battery release lever in the
direction indicated by the arrow and
remove the battery when unlocked.
ャモヵヵ
AInsert the battery until it clicks and
locks.

- 10 -
Charging the battery
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is
always “live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥Do not use the AC cable with any other equipment as it is designed only for this unit.
Also, do not use the AC cable from other equipment with this unit.
≥The battery will not be charged if the unit is turned on.
≥It is recommended to charge the battery in a temperature between 10 oC to 30 oC.
(The battery temperature should also be the same.)
ADC input terminal
≥Insert the plugs as far as they will go.
1Connect the AC adaptor to the DC input terminal.
≥Be careful not to pinch the DC input terminal cover.
2Connect the AC cable to the AC adaptor, then the AC outlet.
≥The status indicator will flash red at an interval of 2 seconds, indicating that charging has
begun.
It will turn off when the charging is completed.
∫Connecting to the AC outlet
It is possible to use this unit with power supplied from the AC outlet by turning on the unit with
the AC adaptor connected.
≥If the status indicator flashes at a particularly fast or slow rate, refer to page 136.
≥We recommend using Panasonic batteries (l11).
≥If you use other batteries, we cannot guarantee the quality of this product.
≥Do not heat or expose to flame.
≥Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period
of time with doors and windows closed.
When this unit is purchased, the battery is not charged. Charge the battery fully
before using this unit.



- 11 -
Charging and recording time
∫Charging/Recording time
≥Temperature: 25 oC/humidity: 60%RH
≥The stated times are when the AC adaptor is used.
≥These times are approximations.
≥The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
≥Recordable time of 3D recording mode is the same. (During 3D recording mode, 1080/50p
and iFrame recording mode can not be used.)
≥The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
≥The batteries heat up after use or charging. This is not a malfunction.
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuously
recordable time
Actual
recordable
time
Supplied battery/
VW-VBK180 (optional)
[3.6 V/1790 mAh]
2h25min
[1080/50p] 1 h 35 min
50 min
[HA],[HG],
[HX],[HE] 1h40min
[iFrame] 1 h 45 min 55 min
VW-VBK360 (optional)
[3.6 V/3580 mAh] 4h20min
[1080/50p] 3h10min 1h40min
[HA],[HG],
[HX],[HE] 3h25min 1h45min
[iFrame] 3h35min 1h50min
Battery capacity indication
≥The display changes as the battery capacity reduces.
####
If there is less than 3 minutes remaining, then will become red. If the battery
discharges, then will flash.
≥The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. The actual time can vary depending on your actual use.
≥When using the AC adaptor or batteries made by other companies, the remaining
battery capacity will not be shown.

- 12 -
The unit can record still pictures or motion pictures to an SD card or built-in memory. To
record to an SD card, read the following.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for
motion picture recording.
* SD Speed Class Rating is the speed
standard regarding continuous writing.
Check via the label on the card, etc.
≥Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/
SDXC Memory Cards that can be used for motion picture recording on the following
website.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
≥4 GB or more Memory Cards that do not have the SDHC logo or 48 GB
or more Memory Cards that do not have the SDXC logo are not based
on SD Memory Card Specifications.
≥When the write-protect switch A on SD card is locked, no recording,
deletion or editing will be possible on the card.
≥Keep the Memory Card out of reach of children to prevent swallowing.
Preparation
Recording to a card
This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC
Memory Cards and SDXC Memory Cards. When using an SDHC memory card/SDXC
memory card with other equipment, check the equipment is compatible with these memory
cards.
Card type Capacity Motion picture recording Still picture recording
SD Memory
Card
8MB/16MB/
32 MB Cannot be used. Cannot be guaranteed
in operation.
64 MB/128 MB/
256 MB
Cannot be guaranteed in
operation.
512MB/1GB/
2GB
Can be used. Can be used.
SDHC
Memory Card
4GB/6GB/8GB/
12 GB/16 GB/
24 GB/32 GB
SDXC
Memory Card 48 GB/64 GB
e.g.:
32

- 13 -
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1Open the SD card cover and
insert (remove) the SD card
into (from) the card slot B.
≥Face the label side Cin the direction
shown in the illustration and press it
straight in as far as it will go.
≥Press the centre of the SD card and then
pull it straight out.
2Securely close the SD card
cover.
≥Securely close it until it clicks.
≥Do not touch the terminals on the back of
the SD card.
≥Do not apply strong shocks, bend, or drop
the SD card.
≥Electrical noise, static electricity or the
failure of this unit or the SD card may
damage or erase the data stored on the
SD card.
≥When the card access lamp is lit, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
Performing the above while the lamp is on
may result in damage to data/SD card or
this unit.
≥Do not expose the terminals of the SD
card to water, garbage or dust.
≥Do not place SD cards in the following
areas:
jIn direct sunlight
jIn very dusty or humid areas
jNear a heater
jLocations susceptible to significant
difference in temperature (condensation
can occur.)
jWhere static electricity or
electromagnetic waves occur
≥To protect SD cards, return them to their
cases when you are not using them.
≥About disposing of or giving away the SD
card. (l138)
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (l36) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.



Access lamp [ACCESS] A
≥When this unit is accessing the SD
card
or built-in memory , the access lamp
lights up.

- 14 -
You can turn the unit on and off using the power button or by opening and closing the LCD
monitor.
Turning the unit on and off with the power button
Open the LCD monitor and press the power button to turn on the unit.
AThe status indicator lights.
Turning the unit on and off with the LCD monitor
The unit is turned on when the LCD monitor is opened, and unit is turned off when it is
closed.
During normal use, opening and closing of the LCD monitor can be conveniently used
to turn the unit on/off.
∫To turn on the unit
AThe status indicator lights.
∫To turn off the unit
BThe status indicator goes off.
≥The unit will not turn off while recording motion pictures even if the LCD monitor is closed.
≥In the following cases, opening the LCD monitor does not turn on the unit. Press the power
button to turn on the unit.
jWhen the unit is purchased
jWhen you have turned off the unit using the power button
≥To turn off the unit while connecting an external microphone with the MIC terminal, press
the power button.
Preparation
Turning the unit on/off
A clicking sound is heard when the unit is shaken.
≥This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned on and change the mode to
or .

To turn off the unit
Hold down the power button until the status
indicator goes off.



- 15 -
Change the mode to recording or playback.
Operate the mode switch to change the mode to , or .
Preparation
Selecting a mode
Motion picture recording mode (l21)
Still picture recording mode (l23)
Playback mode (l27, 72)

- 16 -
You can operate by directly touching the LCD monitor (touch screen) with your finger.
It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with
your fingers.
∫Touch
Touch and release the touch screen to select icon or
picture.
≥Touch the centre of the icon.
≥Touching the touch screen will not operate while
you are touching another part of the touch screen.
∫Slide while touching
Move your finger while pressing on the touch screen.
∫About the operation icons
///:
These icons are used to switch the menu and thumbnail
display page, for item selection and setting etc.
:
Touch to return to the previous screen such as when
setting menus.
Preparation
How to use the touch screen

- 17 -
About the touch menu
Touch (left side)/ (right side) of on the touch menu to switch the operation icons.
Touch (left side)/ (right side) of on the touch menu.
≥It is also possible to switch the operation icons by sliding the touch menu right or left while
touching it.
BTouch these icons to switch pages upward or downward.
CDisplayed only during the manual mode.
∫To display the touch menu
≥Do not touch the LCD monitor with hard pointed tips, such as ball point pens.
≥Perform the touch screen calibration when the touch is not recognised or wrong location is
recognised. (l38)
ATouch menu
Recording mode Playback mode
The touch menu will disappear when no function is
performed for a specific period of time during
recording mode. To display it again, touch .
T
W



MENU
T
W
FOCUS
WB
SHTR
IRIS

MENU
ALL

- 18 -
When the unit is turned on for the first time, a message asking you to set the date and time
will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
1Select the menu. (l30)
2Touch the date or time to be set, then set the desired value using /
.
ADisplaying the World time setting (l31):
[HOME]/ [DESTINATION]
≥The year can be set between 2000 and 2039.
≥The 24-hour system is used to display the time.
3Touch [ENTER].
≥A message prompting for World time setting may be
displayed. Perform the World time setting by touching the screen. (l31)
≥Touch [EXIT] to complete the setting.
≥The date and time function is driven by a built-in lithium battery.
≥When this unit is purchased, the clock is set. If the time display becomes [- -], the built-in
lithium battery needs to be charged. To recharge the built-in lithium battery, connect the AC
adaptor or attach the battery to this unit. Leave the unit as it is for approx. 24 hours and the
battery will maintain the date and time for approx. 4 months. (The battery is still being
recharged even if the unit is off.)
Preparation
Setting date and time
: [SETUP] #[CLOCK SET]
MENU

- 19 -
∫Basic camera positioning
1Hold the unit with both hands.
2Put your hand through the grip belt.
3It is convenient to use the recording button icon Awhen holding the unit around your
waist.
≥When recording, make sure your footing is stable and there is no danger of colliding with
another person or object.
≥When you are outdoors, record pictures with the sunlight behind you. If the subject is
backlit, it will become dark in the recording.
≥Keep your arms near your body and separate your legs for better balance.
≥Do not cover the microphones with your hand etc.
∫Basic motion picture recording
≥The unit should normally be held steady when recording.
≥If you move the unit when recording, do so slowly, maintaining a constant speed.
≥The zoom operation is useful for recording subjects you cannot get close to, but overuse of
zoom in and zoom out can make the resulting motion picture less enjoyable to watch.
∫Recording Yourself
Rotate the LCD monitor towards the lens side.
≥The image is horizontally flipped as if you see a mirror
image. (However the image recorded is the same as a
normal recording.)
≥Only some indications will appear on the screen. When
appears, return the direction of the LCD monitor to
normal position and check the warning/alarm indication.
(l126)
Basic
Before recording



- 20 -
The card and built-in memory can be selected separately to record motion pictures or still
pictures.
1Change the mode to or .
2Select the menu. (l30)
3Touch the media to record motion pictures or still pictures.
≥The media is selected separately to motion pictures or still pictures is highlighted in yellow.
4Touch [ENTER].
Basic
Selecting a media to record [HDC-TM99]
: [MEDIA SELECT]
A[VIDEO/SD CARD]
B[VIDEO/Built-inMemory]
C[PICTURE/SD CARD]
D[PICTURE/Built-inMemory]
MENU


