Panasonic Palmcorder PV-L50 User manual

Palmcorder” Panasonic'
PalmSight"
Vide
Camcorder
Operating
Instructions
Models No. PV-L50/PV-L60
(PV-L50) — (PV-L6O)
Please read these instructions carefully betore attempting to operate this product.
Please save this manual.
Guia para rápida consulta en español está incluida.
1-800-211-PANA(7262)
consumerproducts @ pana sonic.com
LSOTOZ67A
For assistance, please call
or send e-mail to

Things You Should Know
Thank you for choosing ‘Panasonic!
You have purchased one of the most sophisticated and reliable products on the market
today. Used properly, it will bring you years of enjoyment. Please take time to fill in the
information below. The serial number is on the tag located on the rearside of your
Camcorder. Be sure to retain this manual as your convenient Camcorder information
source.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Unpack your Camcorder
These accessories are provided in order to set up or use your Camcorder.
1 pc. AC Adaptor 1 pc. Battery Pack (PV-BP15) 1 pc. Audio/Video Cable
(PV-A17) (pages 11, 12, 13) (LSJA0283/VJAWO032/
with DC Power Cable VJAW0039) (pages 31, 33)
(page 14) a
1 pc. Shoulder Strap 1 pc. VHS PlayPak ` 1 pc. CR2025 Clock Battery
(LSFC0012) (page 16) (PV- P1/VYMWO009) and (VSBWO004)
one "AA" battery (page 32) (installed in Camcorder)
(page 50)
SF,
1 pc. Remote Control Holder 1 pc. 8-Function Remote 1 pc. Compact Video
(VGQ6893) (pages 16, 28) (VSQW0038) with one Cassette Tape
CR2025 Battery. (page 28) (NV-TC30AH/NV-TC30H)
(pages 15, 32) (PV-L60 only)
CD :
v € Æ
Remote has been loaded with
battery.(page 50)
For assistance, please call : 1-800-211-PANA(7262)
2 Wor send e-mail to : consumerproducts Y panasonic.com

Things You Should Know
Safety Precautions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Your Compact VHS Camcorder is designed to record and play back in Standard Play
(SP) and Super Long Play (SLP) modes. You can also play a Compact VHS
Camcorder recording on your VHS VCR using the VHS PlayPak supplied.
This Camcorder is equipped with the HQ System to provide exceilent video pictures,
and is compatible with standard VHS equipment.
It is recommended that only cassette tapes that have been tested and inspected for use
in VCR machines with the MBIN and/or mark be used.
This symbol warns the user that
uninsulated voltage within the unit may
An FEE RATÓN have sufficient magnitude to cause electric
ludi) d NOT OPEN shock. Therefore, it is dangerous to make
any kind of contact with any inside part of
this unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). This symbol alerts the user that important
NO USER-SERVICEABLE PARTS INSIDE. literature concerning the operation and
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL, maintenance of this unit has been included
Therefore, it should be read carefully in
order to avoid any problems.
The above markings are located on the appliance bottom cover.
FCC Warning: Any unauthorized changes or modifications to this equipment would
void the user's authority to operate.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interterence that may cause undesired operation.
Note: This equipment has been tested and found to comply with Part 15 and part 18 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
when operated ín a residential environment.
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, use the equipment in another location and/or
utilize an electrical outlet different from that used by the receiver.
If necessary, consult the dealer or an experienced radio/TV technician for help. You may find the
booklet, ‘Something About Interference’ available from FCC local regional offices helpful.

Important Safeguards
EE IPAE IM ee IA
"Aire, Eeër XT
FERS AA e rs
10.
Read Instructions — All the safety and operating
instructions should be read before the unit is
operated.
Retain Instructions — The safety and operating
instructions should be retained for future reference.
Heed Warnings — Alt warnings on the unit and in
the operating instructions should be adhered to.
Follow Instructions — All operating and
maintenance instructions should be followed.
Cleaning — Unplug this video unit from the wall
outtet before cleaning. Do not use liquid or aerosol
cleaners. Use a dry cloth for cleaning.
Attachments — Do not use attachments not
recommended by the video product manufacturer
as they may be hazardous.
Water and Moisture — Do not use this video unit
near water — for example near a bath tub, wash
bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, and the like.
Accessories — Do not place this video unit on an
unstable cart, stand, tripod, bracket, or table. The
video unit may fall, causing serious injury to a child
or adult, and serious damage to the unit. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sotd with the
video unit. Any mounting of the unit should follow
the manufacturer's instructions and should use a
mounting accessory recommended by
the manufacturer. An appliance and
cart combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance and cart
combination to overturn.
Ventilation — Slots and openings in the cabinet are
provided for ventilation and to ensure reliable
operation of the video unit and to protect it from
overheating. These openings must not be blocked
or covered. Never place the video unit on a bed,
sofa, rug, or other similar surface, or near or over a
radiator or heat register. This video unit should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.
Power Sources — This video unit should be
operated only from the type of power source
indicated on the marking tabel. If you are not sure
of the type of power supply to your home, consult
your appliance deater or local power company. For
video units intended to be operated from battery
power, or other sources, refer to the operating
instructions.
For assistance, please call :
11.
12.
13.
14.
Grounding or Polarization — This video unit may
be equipped with either a polarized 2-wire AC
(Alternating Current) line plug (a plug having one
blade wider than the other) or 3-wire grounding
type plug, a plug having a third (grounding) pin.
The 2-wire polarized plug will fit into the power
outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still fails to fit, contact
your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
The 3-wire grounding type plug wiil fit into a
grounding type power outlet. This is a safety
feature. if you are unable to insert the plug into the
outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of
the grounding type plug.
Power-Cord Protection — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Paying particular attention to cords of
plugs, convenience receptacles, and the point
where they exit from the unit.
Outdoor Antenna Grounding — If an outside
antenna or cable system is connected to the video
unit, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges. Part 1 of
the Canadian Electrical Code, in USA Section 810
of the National Electrical Code, provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna
discharge unit, connection to grounding efectrodes,
and requirements for the grounding electrode.
ELECTRIC
SERVICE
EQUIPMENF GROUNDING CONDUCTORS
(NEC SECTION 810-21)
Le GROUND CLAMPS -
NEC — NATIONAL ELECTRICALCODE INEC ART 250, PART Hj
Lightning — For added protection of this video unit
receiver during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system, This will prevent damage
to the video unit due to lightning and power-line
surges.
1-800-211-PANA(7262)
or send e-mail to : consumerproducts ? panasonic.com

Important Safeguards m
eH LY ek A eno EE e PETENDUM DEE RA Let NA "gen EN coe ER A IE es MAA AA aie
15. Power Lines — An outside antenna system should b. If any liquid has been spilled onto, or objects
not be located in the vicinity of overhead power have fallen into the video unit.
tines or other electric light or power circuits, or c. If the video unit has been exposed to rain or
where it can fall into such power lines or circuits. water.
When installing an outside antenna system, d. If the video unit does not operate normally by
extreme care should be taken to keep from following the operating instructions. Adjust only
touching such power lines or circuits as contact those controls that are covered by the operating
with them might be fatal. instructions, as an improper adjustment of other
16. Overloading — Do not overload wall outlets and controls may result in damage and will often
extension cords as this can result in a risk of fire or require extensive work by a qualified technician
electric shock. to restore the video unit to its normal operation.
17. Objects and Liquids — Never push objects of any e. If the video unit has been dropped or the cabinet
kind into this video unit through openings as they has been damaged.
may touch dangerous voltage points or short out f. When the video unit exhibits a distinct change in
parts that could result in a fire or electric shock. performance — this indicates a need for service.
Never spill liquid of any kind onto the video unit. 20. Replacement Parts — When replacement parts are
18. Servicing — Do not attempt to service this video required, be sure the service technician has used
unit yourself as opening or removing covers may replacement parts specified by the manufacturer or
expose you to dangerous voltage or other hazards. have the same characteristics as the original part.
Refer all servicing to qualified service personnel. Unauthorized substitutions may result in fire,
19. Damage Requiring Service — Unplug this video electric shock or other hazards.
unit from the wait outlet and refer servicing to 21. Safety Check— Upon completion of any service or
qualified service personnel under the following repairs to this video unit, ask the service technician
conditions: to perform safety checks to determine that the
a. When the power-supply cord or plug is video unit is in safe operating order.
damaged.
Precautions
USE & LOCATION
* TO AVOID SHOCK HAZARD ... Your Camcorder and power supply should not be exposed to rain or moisture.
Do not connect the power supply or operate your Camcorder if it gets wet. Your Camcorder has been designed
for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or
a direct splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts
of your Camcorder. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug
your Camcorder from the power supply before cleaning.
* DO NOT AIM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS.
* DO NOT LEAVE THE CAMCORDER WITH THE EVF AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE
DAMAGE TO THE INTERNAL PARTS OF THE EVF.
* DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, in direct sunlight,
inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your
Camcorder.
* AVOID SUDDEN CHANGES IN TEMPERATURE ... If the unit is suddenly moved from a cold place to a warm
place, moisture may form on the tape and inside the unit.
* DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.
* STORAGE OF YOUR CAMCORDER ... Store and handle your Camcorder in a manner that will not subject it to
unnecessary movement (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which
could be damaged by improper handling or storage.
CARE
* TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder
body.'
* TO PROTECT THE LENS ... Do not touch the surface of the lens with your hand. Use a commercial camcorder
lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.
* TO PROTECT THE FINISH OF YOUR CAMCORDER ... Before handling your Camcorder, make sure your
hands and face are free from any chemical products, such as suntan lotion, as it may damage the finish.

Table of Contents
odie EE SESS ee EE. OS AA
"Getting Started
Things You Should KNOW EE 2
ul el (ée EE 4
SEENEN ENEE 5
GIN Démo RTE 8
Quick Operation Guide caia 9
Supplying e 11
Cassette Intormialioh Zuse no 15
Attaching Shoulder Strap/Remote Holder... 16
MENU MOOG...... ege mare re iba vi pn en n Ra o AVE c dae ye Ue ne Ea oca 17
Seting tha Clock eege Ee de EY ei nid 19
Buüilt-in Auto: LIRE or ——————————— 22
Basic Operation:
Gamer FE COMMING iis satay Ge ane Eeer e 23
8-Function Remote Control EE 28
Leg le Welte ne CEET 29
Copying your Tapes (GUBDING) EE 33
Special Features `
FOur-Speed- Power LOOM EE 34
iz izle e La EE 34
EE T CPC HELME PAPE ERNE INA 35
High Speed SMU E 36
uri LAND EN 37
IER geeiert Eege 38
Color Digital Fade EE 39
Digital LOOM EE? 40
Digital Electronic Image Stabilization (E LS). 41
Secure MODO dao 42
Ee Tier E AS A AA E AE A 43
Viewfinder/LCD Monitor e —————— —————— À—— 46
Oberallon Notes a dee ven coe eee tum ee imp ee rA 49
Replacing Clock/Remote Battery... oorr rete dai ege 50
Palmcorder Accessory System EE B1
Palmcorder Accessory Order POT! acc eet rét axe ergo e than eos deeg 52
le nl ET 53
Request for Service Notice iios pde Re ERO SM lips 53
Before Requesting Service ..................es sse Eege 54
A E TA E T E TT 55
le ET 57
Spanish Quick Use Guide/Guía Para Uso Råpido ....ooooocccnoncccccccccccccconnaconananono ronca ncnananens 59
For assistance, please call : 1-800-211-PANA(7262)
6 or send e-mail to : consumerproducts @panasonic.com

Table of Contents
This operating instruction book is designed for use with models PV-L50 and PV-L60.
illustrations in this manual show the PV-L60. Features may vary, so please read carefully.
9
He
(UY
Differences between models
Model Number PV-L50 PV-L60
LCD Monitor 63.5 mm (2.5 inch) 101.6 mm (4.0 inch)
Liquid Crystal Display Liquid Crystal Display
Compact Video
PAAS

DOWN
O;
DISPLAY MENU
Self Demo Mode
Self Demo mode is on when the |
screen at the right appears. Follow
the steps below to turn it off.
For assistance, please call : 1-800-211-PANA(7262)
or send e-mail to : consumerproducts @ panasonic.com
dt
Before you begin...
* Connect Camcorder to power source.
EVF or LCD Monitor
Panasonic
ITS TAPES PLAY
IN YOUR VCR
YES, IT'S VHSI
18x LENS / 150x D.ZOOM
DIGITAL STABILIZATION
FULL-SIZE HEAD SYSTEM
AUTO/PHRASE TITLER
1 Set POWER to CAMERA.
Press MENU for MENU mode.
Press UP A or DOWN Y to select
SELF DEMO}
DISPLAY E ON
i OFF
ECURITY ` : OFF
VIDEO EFFECTS ; FADE
BLACK
SELECT: PUSH Y/A KEY
SET : PUSH DISPLAY KEY
ENU KEY
END ` ; PUSH MEN
3 Press DISPLAY to select OFF.
4 Press MENU to exit.
Note:
* Self Demo stops automatically if
battery is attached (page 12) and
cassette tape is inserted (page 15).
* Inserting a tape alone (or attaching a
partially charged battery) only temporarily
stops Self Demo.
* Self Demo stops for 30 seconds when a
function key other than Record/Pause
Tape Speed Selector, Light, Play, Rewind
search, Fast forward search, Stop, and
Still is pressed.
To turn Self Demo back on.
e Set to SELF DEMO: ON in MENU screen.

Quick Operation Guide
Charge Battery Pack fully before operation (page 11).
2 Insert Battery.
CHARGE Lamp
lights and then goes
out when charging is
done.
insert Cassette
2 Slide TAPE EJECT to open door.
1 Attach fully charged Battery
(pages 11, 12).
3 Insert cassette (page 15).
4 (PV-L60 shown}
Press here to close door.
Camera Recording
When the LCD monitor is open, the EVF automatically turns OFF (page 24).
1 Press LCD-OPEN to unlock the
LCD monitor. Swing it fully open 3
and adjust the angle. Press RECORD/PAUSE to start
recording.
Press RECORD/PAUSE again to
pause recording.

Quick Operation Guide
Playback using the LCD Before you begin... m
S : * Charge Battery Pack fully before operation
Monitor (page 11).
When the LCD monitor is open, the EVF
automatically turns OFF (page 29).
1 Press LCD-OPEN to
unlock the LCD monitor.
Swing it fully open and (PV-L60 shown)
adjust the angle.
2 Set POWER to VCR.
3 Press REWIND/SEARCH
to rewind tape.
Press PLAY to
start playback.
>
Press
STOP
to
stop
playback.
For assistance, please call : 1-800-211-PANA(7262)
1 0 or send e-mail to : consumerproducts € panasonic.com

Supplying Power _
Charge Battery Pack fully before use.
CHARGE
1 Plug in AC Adaptor.
Lamp
27
1 POWER Lamp lights.
2 Insert Battery.
3 @ Align right side of Battery with line
on AC Adaptor.
© Press Battery down and slide in
direction of arrow.
CHARGE Lamp lights and then goes
out when charging is done.
(approx. 1 hour)
3 Remove Battery
Slide Battery out and off.
* Battery life gradually decreases after
repeated use and recharging. If operation
time becomes very short even after a
sufficient charge, discard Battery properly
(page 12).
Battery Charging
Confirmation Marker
Use this marker as a reminder to yourself
when the battery is fully charged or in need
of a charge. This marker performs no
function and is for your reference only.
Note:
After recharging 5 times, use BATTERY
REFRESH feature as explained on
page 12.
11

Sa labo Power
A fully OS Battery provides a maximum of about 1 hour 10 minutes of continuous
use (LCD monitor off) or about 55 minutes (LCD monitor on). Actual time may vary due to
operating conditions. Using the Built-in Light decreases operating time.
1 Attach Battery
(O) Align Battery with top of mounting
surface.
BATTERY @ Press and snap into place.
PACK 2
Remove Battery
While sliding BATTERY RELEASE,
remove Battery.
Battery Refresh
This feature completely discharges Battery before recharging begins.
Use after about every 5 charges for optimum Battery performance.
1 Plug in AC Adaptor.
* POWER Lamp stays on as long as
Adaptor is plugged in.
CHARGE Lamp
2 Place Battery into Adaptor.
3 Press BATTERY REFRESH.
The CHARGE Lamp flashes during
discharge then stays lit until charging
is complete.
If BATTERY REFRESH is pressed
^ by mistake, remove Battery from
3 BATTERY 2 4 Adaptor and reinsert it for normal
REFRESH
,
charging.
4 Remove Battery.
* Charging takes about 5 hours when
Battery Refresh is used.
* Battery will not operate in extremely high
temperatures.
For assistance, please cail : 1-800-211-PANA(7262)
1 2 or send e-mail to : consumerproducts € panasonic.com

Supplying Power
Caution: To avoid Battery damage:
* Charge only with specified charger. * Do not drop or jar Battery.
* Battery can be charged within a temperature * Use Battery with specified units only.
range of 10 °C (50 °F) and 35 °C (95 °F). * |f Battery is used in extremely high
* Battery is normaily warm after charging or just temperatures, a safety device will
after use. automatically prevent operation.
* Do not use an insufficiently charged or worn-
out Battery.
To prolong Battery life:
* While not in use, remove Battery from the
Safety precautions: Camcorder and AC Adaptor and store in a
* Do not get Battery near, or dispose of in fire. cool, dark, dry place.
* Do not directly connect (short circuit) the * Keep Battery terminals clean.
positive (+) and negative (—) terminals.
* Never attempt to disassemble or reassemble
Battery.
U.S.A. CONSUMERS:
ATTENTION:
The product you have purchased is powered by a nickel cadmium battery which is
recyclable. At the end of its useful life, under various state and local laws, it is illegal to
dispose of this battery into your municipal waste stream. Please call 1-800-8-BATTERY
Hr for information on how to recycle this battery.
A
13

EE
AC
Adaptor
3
Connect AC Adaptor VCR DC OUT
to Camcorder DC IN with supplied
DC Power Cable.
Plug in AC Adaptor.
POWER Lamp lights.
: * AC Adaptor cannot power Camcorder while
VCR DC OUT Connector charging Battery.
* When not in use, unplug AC Adaptor from AC
outlet. (Adaptor uses 1.2 W of electricity while
plugged in.)
CAUTION:
This unit will operate on 110/120/220/240 V AC. An AC plug adaptor may be
required for voltages other than 120 V AC. Please contact either a local or foreign
electrical parts distributor for assistance in selecting an alternate AC plug.
We recommend using the accessory power plug adaptor (VJSS0070) in an area
which has special AC outlets. *
Car Battery Cord (Optional)
Connect PV-C16 Car Battery Cord
(optional) to Camcorder DC IN.
2 A Start engine first.
B Plug Car Battery Cord into
Cigarette lighter socket.
* If Car Battery cord fuse needs
replacing, use exact current rating
(in amps).
DC IN i
Connector {f
d
Cigarette Lighter Note:
Socket (12 V) * This cord only works in vehicles equipped
with DC 12 V (negative ground) battery.
Check with your car/truck dealer. Use
only specified car battery cord.
* To avoid blowing the car battery cord
fuse, do step 2 in the proper order.
* Running vehicles must be well ventilated.
Car Battery Cord Cigarette
- * When not in use, disconnect cigarette
(optional) Lighter Plug lighter plug.
For assistance, please call : 1-800-211-PANA(7262)
1 4 or send e-mail to : consumerproducts 9 panasonic.com

Cassette Information
= > ;
Sa, Steg oe.
Cassette Insertióon/Removal :
Turn Tape Wheel in direction of
arrow until there is no slack.
Attach Battery (page 12).
ee
Slide TAPE EJECT to open door.
N
da OON =
Insert cassette as shown.
5 Press here to close door.
« To remove the cassette, slide the
TAPE EJECT switch.
Record/Playback Time — TAPE SPEED Selector
Use tapes with the [VHSIA] mark in this unit. .
Tape Speed Cassette type
Selector Position | TC-20 TC-30 TC-40
SP
;
:
SLP
1
hour
1
hour
2
hours
(Super Long Play) 30 minutes
» SLP playback may contain more picture noise.
Erase Protection Tab
A record tab ensures recordings are not accidentally erased.
1 To prevent erasure,
break off tab with screwdriver.
(Or, slide tab open.)
2 To record again,
cover hole with adhesive tape.
(Or, slide tab closed.)
— = rr 15

Attaching Shoulder Strap/Remote Holder
Remove Battery Pack before doing steps.
1 Undo strap ends from buckles.
2 Remove one buckle.
3 ( Thread strap (with no buckle)
through Remote Holder so it
faces outward.
(B) Replace buckle.
4 Thread strap ends through Strap
Rings on Camcorder.
CÁM A. geg 5 e a
TK A ST Re-insert the strap ends into
mw, buckles.
min. 25.4mm (1 inch)
Insert Remote into Holder when not.
in use.
Pull a loop of strap from buckle.
Pull strap tight to shorten or
lengthen.
Adjust Hand Strap length to fit your
hand as shown.
For assistance, please call : 1-800-211-PANA(7262)
or send e-mail to : consumerproducts @ panasonic.com

Using MENU Mode
A
Ce
DOWN
X
DISPLay MENU
MENU Mode
Before you begin...
* Connect Camcorder to power source.
* Set POWER to CAMERA or VCR.
1 Press MENU for MENU mode.
--- MENU --- PAQE v2 --- MENU ---
TITLE ` AUTOMANUAL DISPLAY ; ON
TALLY LAMP ; ON
STAND-BY RELEASE ; OFF
CLOCK SET
SELECT: PUSH Wia KEY SELECT: PUSH ¥/& KEY
: PUSH DISPLAY KEY SET : PUSH DISPLAY KEY
END : PUSH MENU KEY END : PUSH MENU KEY
CAMERA MODE i VCR MODE
2 Press UP A or DOWN Y to
highlight a menu item.
Select a desired item.
3 Press DISPLAY to set selection.
4 Press MENU to exit.
Note:
* The Menu mode is canceled if UP/
DOWN(4/¥), DISPLAY, or MENU are not
pressed within 5 minutes when Self Demo
mode is off.
* The Menu mode is canceled if UP/
DOWN(A/Y), DISPLAY, or MENU are not
pressed within 30 seconds when Self Demo
mode is on.
17

EE
NUIMode:Screen (CAMERA: MODE)
1 PROGRAMMED REC (page 27).
Camcorder starts and stops
recording at a preset time.
2 TITLE (pages 43-45).
AUTO/MANUAL : 16 items
PHRASE : 10 items
3 TALLY LAMP (page 37).
ON: lamp lights during recording.
4 STAND-BY RELEASE (page 25).
ON: enables quick resumption of
recording from Stand-by mode.
PAGE 2/2 5 CLOCK SET (pages 19-21).
Select to set clock.
--- MENU ---
PROGRAMMED REC
TITLE ; AUTO/MANUAL
; ON
; OFF
PAGE 1/2
oh WN =
SELECT: PUSH V/A KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
A
DISPLAY ; ON
SELF DEMO ; OFF
SECURITY `; OFF 6 DISPLAY (page 46)
VIDEO EFFECTS ; FADE ON: On-screen Display (OSD) screens
BLACK are displayed.
OONO
SELECT: PUSH V/A KEY
SET : PUSH DISPLAY KEY 7 SELF DEMO (page 8)
END : PUSH MENU KEY ON: SELF DEMO screen is displayed.
8 SECURITY (page 42).
ON: enables Motion Security
recording.
9 VIDEO EFFECTS (pages 38, 39).
AUTO FADE : BLACK or WHITE
DIGITAL FADE: TYPE — 7 types
COLOR — 8 colors
MENU Mode Screen (VCR MODE)
--- MENU ---
CLOCK SET
6 DISPLAY ` ; ON
SELECT: PUSH Y/A KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
For assistance, please call : 1-800-211-PANA(7262)
or send e-mail to : consumerproducts @panasonic.com
18

Setting the Clock
Set the following items in order: Time Zone, Daylight Saving Time, Date and Time.
. ^ Before you begin...
Setting the Time Zone * Connect Camcorder to power source.
The Camcorder is preset to Eastern time, * Set POWER to CAMERA or VCR.
To change time zone, do steps at right. Note:
* Clock may lose or gain up to 2 minutes per
month. To adjust, see page 21.
1 Press MENU for MENU mode.
Press UP A or DOWN Y to select
CLOCK SEI
--- MENU --- PAGE t/2
PROGRAMMED REC
TITLE ; AUTOMANUAL
TALLY :
--- MENU +++
DISPLAY ` ON
LAMP :
STAND-BY RELEASE ; OFF
9!
SELECT: PUSH Y/A KEY
: PUSH DISPLAY
: PUSH Fa KEY
SET : : DISPLAY
END : PUSH MENU KEY
: PUSH MENU KEY
CAMERA MODE VCR MODE
2 Press DISPLAY for CLOCK SET
menu. Press UP 4 or DOWN Y to
select --- CLOCK SET ---
TIME ZONES ; EASTERN
D. S. T. S
DATE/TIME : 12:00: 00AM
JAN 1 2000
SELECT: PUSH V/A KEY
: PUSH DISPLAY KEY
: PUSH MENU KEY
3 Press DISPLAY for SELECT TIME
ZONE menu. Press UP A or
DOWN _¥ to select local time zone.
ATLANTIC PACIFIC
ALASKA
CENTRAL HAWAII
MOUNTAIN SAMOA
SELECT: PUSH ¥ia KEY
SET : PUSH DISPLAY KEY
4 Press DISPLAY to confirm entry.
Press MENU twice to exit.
* When traveling, repeat these steps
and select one of the 8 listed time
zones to set the clock to local time.
3 8:00: 9:00 £ 10:00: 11:00: 12:00:
Note:
When traveling outside the listed time zones,
set clock to local time manually (page 21).
19

Setting the Clock
Before you begin... — ~
Clock
will
auto-adjust
to
daylight-saving
*
Connect
Camcorder
to
power
source.
time
(DST).
*
Set
POWER
to
CAMERA
or
VCR.
: : Note:
Ne borin n ei * Auto DST does not function if time zone is
your area, set to OFF DSR the set to Hawaii or Samoa (page 19).
following steps.
1 Press MENU for MENU mode.
Press UP A or DOWN Y to select
CLOCK SETH
--- MENU ---
DISPLAY ` ON
--- MENU --- PAGE 1/2
PROGRAMMED REC
TITLE ; AUT
TALLY LAMP ; ON
STAND-BY RELEASE
; OFF
: PUSH V/A KEY SELECT: PUSH ¥/a KEY
: PUSH DISPLAY KEY SET ` PUSH Y
: PUSH MENU KEY END : PUSH MENU KEY
CAMERA
MODE
VCR
MODE
2 Press DISPLAY for CLOCK SET
menu. Press UP A or DOWN ¥ to
select DANA. Ee
TIME ZON
bag ; AUTO
DATE/TIME ; 12:00: 00AM
JAN 1 2000
SELECT: PUSH F/A KEY
SET ` : PUSH DISPLAY KEY
S MENU KEY -
Press DISPLAY for DAYLIGHT
Spring
(First
Sunday
in
April):
SAVING
TIME
menu.
Press
UP
A
or
DST:
AUTO
-
ahead
one
hour.
DOWN
Y
to
select
OFF
or
AUTO.
1:00 a.m. 2:00 a.m.
Daylight Saving e
Time 3:00 a.m. 4:00 a.m.
Autumn
(Last
Sunday
in
October):
Press
DISPLAY
to
confirm
entry.
DST:
AUTO
=
back
one
hour.
Press
MENU
twice
to
exit.
Daylight
Saving
1:00
a.m.
2:00
a.m.
Time
.
[Normal Time | —— a
1:00 a.m, 2:00 a.m.
AUTO
OFF
SELECT: PUSH V/a KEY
SET : PUSH DISPLAY
20 For assistance, please call : 1-800-211-PANA(7262)
or send e-mail to : consumerproducts @ panasonic.com