Panasonic Palmcorder VDR-D100 User manual

DVD/DVC Camera
Seminar
VDR-D100/200/300 and PV-GS29/39
Panasonic

Features (VDR-D100~300)
• DVD Multi DVD-RAM/R/-RW
• DSC Feature (Disc & SD Card)
• One Touch Navigation & Joystick
• Built in Video Light (D105&D200 Only)
• Multi Language OSD
• High Zoom Ratio
• USB2.0 HS Mode
• Zoom Microphone
• SD Slot (D200 Only)
• 30X Zoom

DVD Camera Comparison

Recording/Playback Media (DVD Camera)

Discs that can not be used in this unit

Camera Structure VDR-D100/200

Camera Structure VDR-D300

Camera Structure VDR-D300

Extension Cables for VDR-D100-200
Adjustment procedure for the DVD and the DVC Cameras is the
same
Also used for VDR-D300
Also used for
VDR-D300
Also used for VDR-D300

Also used for
VDR-D100/200 Also used for
VDR-D100/200
Also used for
VDR-D100/200
Extension Cables for VDR-D300

Light box, Charts, etc for all DVD Cameras
Adjustment procedure for the DVD and the DVC Cameras is the
same

Adjustment Necessary After Board Replacement

Reset
If the unit displays “PUSHTHERESETSWITCH”, press
the reset switch to restart the unit.
Reset Button
NOTE: The unit turns off
automatically if the
Reset switch is not pressed
within 1 minute.

Service Mode
To Enter:
1. Turn the Power SW ON.
2. Press “DELETE”,
“RECORD” and Push
the “JOYSTICK” to the
left together for 3
seconds without a Disk
or SD Card inserted.
To Exit:
Unplug the AC Cord.

Service Mode
Use the joystick to select items in page 1/2. (Page 2/2 is
not used)
Item 1: Factory settings (Reset)
Item 2: DVD Drive information
Item 3: Reset the total power-on time
Item 4:
Item 5: Camera information To select YES

DVD Drive/Camera information
Item 5: Camera information
1.DVD drive F/W Version
2.Drive Serial No
3.BER 01234567
4.DVD ERR Code 04 03 00
5.LASER current/Temp
6.Function
7.Region code
For reference
For reference
[Hour Meter]
PWR: Total power on time
EE :
[Error Code]
Camera Error code :51 52 00
Record
TEMP: The number of time Temp message display
DRV:
No use for service
No use for service
Latest code
Previous code
Before Previous code
CAN NOT OPERATE.
TEMPARATURE IS HIGH.
PLEASE TURN OFF AND WAIT A WHILE.
Item 2: DVD Drive information

List of Error Codes
00 : No error
51 : Zoom Motor Lock
52 : Focus Motor Lock
00 00 00 : No error
04 09 04 : Laser Error
04 09 03 : Spindle Servo Error
04 53 00 : Eject Motor Lock
04 93 00 : Temperature Error
02 3A 02 : Tray open w/o Eject
To clear error code, select Item 1: Factory setting (Reset)
DVD Drive information Camera Error Code

How to Read The Error History
When an error occurs, “PUSH
THE RESET SWITCH” is
displayed on the screen.
The Service Mode can not be
entered at this time.
To read error code, perform
the following.
• Connect the PC to the unit.
• Run the adjustment software.
• Select the “Lock Info” in
diagnosis.
The Error codes are displayed
(See picture to the right).

Troubleshooting hint for DVD Error Code
00 XX XX: No error (X: any NO)
04 09 04 : Laser Error
04 09 03 : Spindle Servo Error
04 93 00 : Temperature Error
If any of these Error Codes appears, Replace the DVD Drive Unit
04 53 00 : Eject Motor Lock
02 3A 02 : Tray open w/o Eject
If any of these Error Codes appears, Replace the Disc Cover Unit
DiscCoverUnit
DVDDriveUnit

Troubleshooting hint for Camera Error Code
00 : No error
51 : Zoom Motor Lock
52 : Focus Motor Lock Replace the Lens Assembly