Panasonic ET-DLE085 User manual

Thank you for purchasing this Panasonic product.
■Please read these operating instructions and the projector operating instructions carefully, and then use
this product correctly.
■Before using this product, be sure to read “Read this first!” (Page 2).
■Please save this manual for future use.
Model No. ET-DLE085
TQDH19092-1
Zoom Lens
Operating Instructions
Product information (for Turkey only)
EEE Yönetmeliğine Uygundur.
EEE Complies with Directive of Turkey.
ET-DLE085ENTQDH19092-1.indd1ET-DLE085ENTQDH19092-1.indd1 2017/03/149:06:242017/03/149:06:24

2-ENGLISH
Read this first!
Supplied Accessories
WARNING:
Before replacing the zoom lens, be sure to turn the power off and disconnect the power plug from the
wall outlet.
Otherwise, an electrical shock may result.
CAUTION:
Supplied accessories and consumables:
Do not open the desiccant bag. Do not eat the contents. (Inadvertently ingesting desiccant could be
harmful.)
 If the desiccant gets into your eyes or mouth, immediately rinse with plenty of water and seek medical
attention.
 Keep desiccant out of the reach of children.
Make sure that the following has been provided
Part name Appearance (quantity)
Lens cap
1 of each
Always follow these precautions
ET-DLE085ENTQDH19092-1.indd2ET-DLE085ENTQDH19092-1.indd2 2017/03/149:06:242017/03/149:06:24

ENGLISH-3
Before replacing the projection lens
Attaching the Lens
2) Rotate the lens clockwise until you
hear a “click”.
Note
Gently turn the zoom lens counterclockwise to
check that it will not fall out.
1) With the lens mount cover that
came with your projector attached,
align the positioning guide on the
zoom lens with the guide grooves
on the projector, and insert the
zoom lens fully.
There is a red dot at the bottom right end of the
positioning guide.
Attaching the Lens / Detaching the Lens
Guide groove Lens mount cover
Positioning guide
Zoom lens
Return the projection lens to the home position before replacing or removing it.
For details on how to return the lens to the home position, refer to the operating instructions of the projector.
Attention
Make sure that the projector power supply is switched off before attaching or detaching the projection lens.
After removing the projection lens, store it safely away from vibration or impacts.
Do not touch the electric contact points of the projection lens with your fi ngers. Dust and dirt on the contacts
may cause contact malfunctions.
Remove the lens cap before mounting the zoom lens.
Do not touch the surface of the lens with bare hands. Finger prints and dirt on the surface of the lens will be
magnifi ed by the lens and lower the quality of the projected image. Place the supplied lens cap on the zoom
lens when the projector is not in use.
The lens is made of glass. The lens could be damaged if brought into contact with or rubbed against hard
objects. Handle the lens carefully.
Use a clean, soft and dry cloth to wipe away dust and dirt from the lens.
Do not use fl uffy cloths containing oil, water or dust for cleaning. The material in the lens is easily damaged so
do not apply excessive pressure when wiping it.
ET-DLE085ENTQDH19092-1.indd3ET-DLE085ENTQDH19092-1.indd3 2017/03/149:06:252017/03/149:06:25

4-ENGLISH
Detaching the Lens
Focus Adjustment Function
The focal balance between the center and periphery of the projected image changes depending on the size of the
projected image.
The lens is equipped with a focus balance adjustment function for the screen periphery.
Adjusting the Focus
Note
The projected image sizes and scale shown on the periphery focus adjustment ring are an approximate guide.
For details on the projection distance, see the projector specifi cations
(https://eww.pavc.panasonic.co.jp/projector/extranet/main/spec/index.html).
B
A
Lens mount cover
A
C
B
Lens release
button
2) Turn the zoom lens completely
counterclockwise while pressing
the lens release button to detach
the lens.
3) Turn the lens mount cover
clockwise to reattach it.
1) Focus the center of the screen by
operating the projector unit.
2) Turn the periphery focus ring by
hand as shown in the figure to
adjust the focus in the periphery
of the screen.
1) Turn the lens mount cover
counterclockwise to detach it from
the lens and slide it towards the
front end of the lens.
Periphery focus adjustment ring
Attaching the Lens / Detaching the Lens (continued)
ET-DLE085ENTQDH19092-1.indd4ET-DLE085ENTQDH19092-1.indd4 2017/03/149:06:252017/03/149:06:25

ENGLISH-5
F value 1.85 - 2.20
Focal Length (f) 11.8 mm (15/32 inches) - 14.6 mm (9/16 inches)
Dimensions
140 mm (5-1/2 inches)
140 mm (5-1/2 inches)
206 mm (8-1/8 inches)
Net Weight 1.3 kg (2.87 lb)
Lens Type Zoom lens
Width
Height
Depth
Note
As for projection distance, please refer to the operating instructions of the projector.
Specifications the Lens
ET-DLE085ENTQDH19092-1.indd5ET-DLE085ENTQDH19092-1.indd5 2017/03/149:06:252017/03/149:06:25

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical
and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated
collection points,where they will be accepted on a free of charge basis.
Alternatively, in some countries you may be able to return your products to your local retailer
upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any
potential negative effects on human health and the environment which could otherwise arise
from inappropriate waste handling. Please contact your local authority for further details of
your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for
the correct method of disposal.
Information for users in the European Union
Importer’s name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Center
Winsbergring 15, 22525 Hamburg, Germany
ヱ㄂ㄏ㄂ㄔㄐㄏㄊ㄄チヤㄐㄓㄑㄐㄓ㄂ㄕㄊㄐㄏ
Web Site : https://panasonic.net/cns/projector/
© Panasonic Corporation 2013 SS0513AM1047 -PS
Printed in Japan
ET-DLE085ENTQDH19092-1.indd6ET-DLE085ENTQDH19092-1.indd6 2017/03/149:06:252017/03/149:06:25