Panasonic KX-TC1085BXB User manual

ORDERNO. KM40110694C3
Telephone Equipment
KX-TC1085BXB
Cordless Phone
Black Version
(for Asia, MiddleNear East and Other areas)
SPECIFICATIONS
1

2001 KyusyuMatsushita Electronics CO., Ltd. All rights
reserved. Unauthorized copying and distribution isaviolation of
law.
1. STANDARD BATTERY LIFE
2

3

2. LOCATION OF CONTROLS
2.1. Base unit
4

2.2. Handset
5

3. CONNECTIONS
3.1. Connecting the AC Adaptor
6

-USE ONLY WITHPanasonicAC ADAPTORPQLV14BXZ.
-The AC adaptor must remainconnected at all times. (Itisnormal
for the adaptor to feel warm during use.)
-When more than one unitisused, the units mayinterfere with each
other. To prevent or reduce interference, please leave
amplespace between the base units.
3.2. Connecting the Telephone Line Cord
7

8

3.3. Adding Another Phone
4. OPERATION
4.1. Making Calls
9

10

11

4.2. Answering Calls
12

4.3. FLASHButton
13

5. DISASSEMBLY INSTRUCUTIONS
14

ShowninFig. To remove. Remove.
1LowerCabinet Screws (3 × 14)..............................(A) × 5
2 Antenna Screw(3 × 14)................................(B) × 1
15

ShowninFig. To remove. Remove.
3 RearCabinet Batterycover
4 Screws (2.6 × 14)..............................(C) × 2
5 Antenna Screw(2.6 × 14)..............................(D) × 1
6. TROUBLESHOOTING LIST
16

Symptom Referto
Unit
The base unit does not respond toa call fromhandset. ADJUSTMENTS (BASE UNIT)
Base
The base unit does not transmit orthe transmit frequencyis
off.
The transmit frequencyis off.
The transmit poweroutput is low, and the operating distance
betweenbase unit and handset is less thannormal.
The reception sensitivityof base unit is lowwithnoise.
The transmit level is large orsmall.
The reception level is large orsmall.
The unit does not link.
The charge indicatordoes not light. Check Power
The IN USE/Charge indicatordoes not flash.
The movement of BatteryLowindicatoris wrong. ADJUSTMENTS (HANDSET)
Handset
The handset does not respond toa call frombase unit.
The handset does not transmit orthe transmit frequencyis off.
The transmit frequencyis off.
The transmit poweroutput is low, and the operating distance
betweenbase unit and handset is less thannormal.
The reception sensitivityof handset is lowwithnoise.
Does not link betweenbase unit and handset.
The reception level is large orsmall.
The transmit level is large orsmall.
Cross Reference:
ADJUSTMENTS (BASE UNIT) ().
ADJUSTMENTS (HANDSET) ().
Check Power ().
7. TROUBLESHOOTING GUIDE (BASE UNIT)
17

Cross Reference:
Check Power ().
Bell Reception ().
Check Sp-phone Transmission ().
Check Sp-phone Reception ().
Check Battery Charge ().
Check Link ().
Check Handset Transmission ().
Check Handset Reception ().
7.1. Check Power
18

Cross Reference:
Initializing Circuit ().
POWER SUPPLY BLOCK DIAGRAM (BASE UNIT) ().
Cross Reference:
Reset Circuit ().
7.2. Check Sp-phone Reception
19

Cross Reference:
Telephone Line Interface ().
Attenuator control ().
7.3. Check Sp-phone Transmission
Cross Reference:
Telephone Line Interface ().
Attenuator control ().
7.4. Check BatteryCharge
Cross Reference:
Charge Circuit ().
20