Panasonic KX-TC1881B User manual

ORDERNO. KM40103769C1
F11
Telephone Equipment
KX-TC1881B
900MHzCordless Phone
Black Version
(for U.S.A.)
SPECIFICATIONS
1

2001 Kyushu Matsushita ElectricCo., Ltd. All rights reserved.
Unauthorized copying and distribution isaviolation of law.
1. STANDARD BATTERY LIFE
AfteryourPanasonic batteryis fullycharged;
While inuse
(TALK) nearthe base unit* Uptoabout 6 hours
awayfromthe base
unit Uptoabout 4 hours
While not inuse (Stand-By) Uptoabout 14 days
*Withinabout 10 feet (3 m)
2

2. LOCATION OF CONTROLS
(Base unit)
3

(Handset)
4

3. DISPLAY
The handset shows you instructions and information on the display. This displayprompts are
shownbelow.
5

6

7

4. CONNECTIONS
8

Note:
-USE ONLY WITHPanasonicAC ADAPTORPQLV1Z.
-The AC adaptor must remainconnected at all times. (Itisnormal
for the adaptor to feel warm during use.)
-Ifyour unitisconnected to aPBXwhich does not support Caller ID
services, you cannot access those services.
9

4.1. Adding Another Phone
This unit will not function during a powerfailure. To connect a standardtelephone on the same
line, use the Panasonic T-adaptorKX-J66.
10

5. OPERATIONS
5.1. Making Calls
5.1.1. Withthe Handset
11

12

13

5.1.2. Withthe Base Unit (DIgital Duplex Speakerphone)
14

15

5.2. Answering Calls
16

5.2.1. Withthe Handset
5.2.2. Withthe Base Unit
17

6. DISASSEMBLY INSTRUCTIONS
18

ShowninFig.- To Remove Remove
1LowerCabinet Screws (2.6 X 12).....(A) X 5
2 MainP.C. Board Remove the P.C. Board
3Antenna Screw(3 X 12).....(B) X 1
Speaker Screws (3 X 8).....(C) X 3
4 BatteryCover Remove the BatteryCover
5 RearCabinet Screws (2.6 X 12).....(D) X 2
6 MainP.C. Board Screw(2.6 X 12).....(E) X 1
Screws (2.6 X 8).....(F) X 2
Remove the lead
Remove the P.C. Board
Note
*1 — Afterremoving 2 screws (D), insert a (-) driverinto*1 and pull it outside of the cabinet.
6.1. Adjustment to prevent the cabinet from opening at dropping
Stick the twosheets and the rubberon the front cabinet as showninthe figure toprevent the
cabinet fromopening at dropping.
19

7. ASSEMBLY INSTRUCTIONS
7.1. Assemblythe LCD to P.C. Board (Handset)
7.2. Replace the RFunit
20