Panasonic KX-TH102M User manual

PQQW14843WA DM1105MH3096
Setting up the base unit
To connect to the AC adaptor
LUse only the included Panasonic AC adaptor PQLV205.
LThe AC adaptor must remain connected at all times.
To connect the telephone line cord
LConnect the telephone line cord until it clicks into the telephone jack.
To connect to a 2-line telephone jack
To connect to 2 single-line telephone jacks
(120 V AC, 60 Hz)
Hook
LINE1/2
LINE2
LAN
LINE1/2
LINE2 LAN
To 2-line telephone
j
ack
(
RJ14C
)
4-wire telephone line cord with green plugs
LINE1/2
LINE2 LAN
Line 1
Line 2
To single-line telephone jacks (RJ11C)
2-wire telephone line cord
with transparent plugs
4-wire telephone line cord
with green plugs
Model No. KX-TH102-M
Quick Guide
TH102_M_QG(e).fm Page 1 Monday, September 11, 2006 5:39 PM

–2 –
Setting up the handset
To connect the AC adaptor of charger
LUse only the included Panasonic AC adaptor PQLV203.
To install and charge the battery
1Open the inside cover. 3Close the handset cover in the direction
of the arrow.
2Insert the battery as shown. Insert the
Sand Tend of the battery first. Close
the inside cover.
4Place the handset on the charger for 4
hours before initial use.
(120 V AC, 60 Hz)
B
A
TH102_M_QG(e).fm Page 2 Monday, September 11, 2006 5:39 PM

–3 –
Setting up the cordless camera
LUse only the included Panasonic AC adaptor PQLV203.
LThe AC adaptor must remain connected at all times.
LYou can connect the call button if necessary. Refer to the operating instructions for the
connection and setting.
Symbols used for operations
Symbol Meaning
d, G,
A,
f, F,
h
The symbols to the left represent the base unit menu icons.
Example: d
Press the navigator key of the base unit up, down, left, or right to select that
menu icon shown on the display.
q, G,
i, s,
t, u,
v, H,
x
The symbols to the left represent the handset menu icons.
Example: q
Press the navigator key of the handset up, down, left, or right to select that
menu icon shown on the display.
Example:
“Ringer
volume”
Press the navigator key up or down to select the words in quotations shown
on the display.
iProceed to the next operation.
Example:
{MENU}
The words in the brackets show button names on the handset and base
unit.
{^}, {V} Press the navigator key up or down to scroll through the displayed items.
{<}, {>}Press the navigator key left or right to select the desired items.
(120 V AC, 60 Hz)
Hook
TH102_M_QG(e).fm Page 3 Monday, September 11, 2006 5:39 PM

–4 –
Setting the date and time (Handset)
1{MENU}(F2) ixi { SELECT}
2“Date and time” i { SELECT}
3Enter the current month, day, and
year by selecting 2 digits for each.
4Enter the current hour and minute (12-
hour clock format) by selecting 2 digits
for each.
5Press {*} to select “AM” or “PM”.
6 { SAVE}i { OFF}
Adding phonebook items (Handset)
1{MENU}(F2) iqi{SELECT}
2{ADD}
3“Name” i{SELECT}
4Enter the name (max. 16 characters).
i{OK}
5“Phone no.” i{SELECT}
6Enter the phone number (max. 32
digits). i{OK}
7“Set Ringer ID” i{SELECT}
8Select the desired ringer ID. i{OK}
9“Set Picture ID” i{SELECT}
10 Select the desired item. i
{SELECT}
11 Select the desired picture ID. i
{OK}
12 {SAVE}i{OFF}
Basic operation (Base unit)
Feature Operation
Making a call Dial the phone number. i{SP-PHONE}
LYou can also press {LINE1}or {LINE2}to make calls.
Answering a call {SP-PHONE}
Hanging up {SP-PHONE}
Speaker volume Press {V} or {^} repeatedly while on a call.
Making a call with the
redial list
1{REDIAL}
2Press {^} or {V} to select the desired number.
3{SP-PHONE}
Putting an outside call on
hold
Press {HOLD}during an outside call.
Dialing mode 1{MENU}ihi{SET}
2“Set tel line” i{SET}
3“Set dial mode” i{SET}
4Select the desired setting. i{SET}i{STOP}
TH102_M_QG(e).fm Page 4 Monday, September 11, 2006 5:39 PM

–5 –
Basic operation (Handset)
Feature Operation
Making a call Dial the phone number. i{C}
LYou can also press {LINE1}or {LINE2}to make calls.
Making a call with the
redial list
1{REDIAL}
2Press {^} or {V} to select the desired number.
3{C}
Phonebook: making a call 1{MENU}(F2) iqi{SELECT}
2Press {^} or {V} to select the desired item.
3{C}
Answering a call {C}
Turning on the
speakerphone
{s}
Hanging up {OFF}
Receiver/speaker volume Press {^} or {V} repeatedly while on a call.
Putting an outside call on
hold
Press {HOLD}2 times during an outside call.
Viewing the caller list and
calling back
1{MENU}(F2) iGi{SELECT}
2Press {V} to search from the most recent call, or {^} to
search from the oldest call.
3{C}
Ringer volume 1{MENU}(F2) isi{SELECT}
2“Ringer volume” i{SELECT}
3Select the desired line.
4Select the desired volume. i{SAVE}i{OFF}
Ringer tone (outside
calls)
1{MENU}(F2) isi{SELECT}
2“Ringer tone” i{SELECT}
3Select the desired line.
4Select the desired item. i{SAVE}i{OFF}
TH102_M_QG(e).fm Page 5 Monday, September 11, 2006 5:39 PM

–6 –
Video phone (Handset)
Feature Operation
Making a video call During an outside call, press {VIDEO}.
Answering a video call If the other party initiates a video call during a voice call, your
handset switches to a video call automatically.
Switching to a voice call {V-OFF}
Video monitor (Handset)
Feature Operation
Monitoring the room 1{MENU}(F2) iHi{SELECT}
2“Camera & Audio” i{SELECT}
3Select the desired unit. i{SELECT}
4Press {OFF}to stop monitoring.
Answering system (Base unit)
Feature Operation
Answering on/off {ANSWER ON}
Recording your greeting
message
1{MENU}iAi{SET}
2“Greeting record” i{SET}
3Select the desired line. i{SET}
4After the unit beeps, speak clearly about 20 cm (8 inches)
away from the MIC (max. 2 minutes).
5To stop recording, press {STOP}.
Listening to new
messages
When the MESSAGE indicator flashes on the base unit,
press {MESSAGE}.
Listening to old
messages
When the MESSAGE indicator does not flash, press
{MESSAGE}.
Erasing a message Press {ERASE}during playback.
TH102_M_QG(e).fm Page 6 Monday, September 11, 2006 5:39 PM

–7 –
Frequently asked questions
Question Cause & solution
What should I do when
the unit does not work?
LFully charge the battery.
LMake sure that the included AC adaptor and telephone line
cords are plugged into the unit properly.
LThe handset is not registered to the base unit. Register it
(refer to the operating instructions for registration).
LMove closer to the base unit.
When should I replace
the battery?
LReplace the battery with a new one when you charged the
battery until 1is displayed but 3is displayed after a
few 20 or 30 minute voice calls.
What should I do if I forget
the PIN?
LIf you set the PIN and you cannot remember it, you can
reset the base unit. To reset the base unit, refer to the
operating instructions.
What do I need to do to
display the 2nd caller’s
information during an
outside call?
LIn order to use Caller ID, Call Waiting, or Call Waiting
Caller ID (CWID), you must first contact your telephone
company and subscribe to the desired service. After
subscribing, you may need to contact your telephone
company again to activate this specific service, even if you
already subscribed to both Caller ID and Call Waiting with
Caller ID services (CWID).
Why new messages are
not recorded in the unit?
LIf you subscribe to the Voice Mail service, messages are
recorded by the telephone company not your telephone
(refer to the operating instructions for Voice Mail service).
How can I increase
handset volume level?
LPress the navigator key {^} repeatedly while talking.
Can I keep battery
charging all the time?
LYou can leave handset on the charger anytime. There is no
damage to the battery.
TH102_M_QG(e).fm Page 7 Monday, September 11, 2006 5:39 PM

1Read this Quick Guide or Operating
Instructions
2Visit our website:
http://www.panasonic.com/phonehelp
3Contact us via the web at:
http://www.panasonic.com/contactinfo
4Call us at:
1-800-211-PANA (1-800-211-7262)
To order a replacement battery,
please call: 1-800-332-5368
Or visit:
http://www.panasonic.com/batterystore
IMPORTANT!
If your product is not
working properly. . .
TH102_M_QG(e).fm Page 8 Monday, September 11, 2006 5:39 PM