Panasonic KX-TG1032 User manual

PQQW15571YA FC0107FF1017
Setting up
For further information, visit http://www.panasonic.com/help
Base unit CHARGE 7 HOURS
Handset
Charger
Use only the included Panasonic AC adaptor
PQLV207.
(120 V AC, 60 Hz)
(120 V AC,
60 Hz)
Hook Noise filter
(For DSL service users)
“Click”
To single-line
telephone jack
(RJ11C)
“Click”
Confirm
“Charging” is
displayed.
5
w
USE ONLY Ni-MH batteries AAA (R03) size.
Do NOT use Alkaline/Manganese/Ni-Cd batteries.
Install the batteries in proper order (S, T),
matching the correct polarity.
Use only the included
Panasonic AC adaptor
PQLV209.
Press plug
firmly.
Model No. KX-TG1032
KX-TG1033
KX-TG1034
KX-TG1035
Quick Guide
TG103xQG(e).fm1ページ２００７年１月１８日 木曜日 午後４時２８分

– 2 –
Operating tips
{}: shows button names.
Using the navigator key
Press {^}, {V}, {<}, or {>}to navigate
through menus and to select items shown on
the display.
Adjusting audio volume
Press {^} or {V} repeatedly while talking.
Date and time (Handset)
1{MENU}
2{V}/{^}: “Set date & time” i{OK}
3{V}/{^}: “Date and time“ i{OK}
4Enter the current month, day, and year by selecting 2 digits for each.
5Enter the current hour and minute (12-hour clock format) by selecting 2 digits for
each.
6Press {*} to select “AM” or “PM”. i{OK}i{OFF}
Adding items to the phonebook (Handset)
1{k} i{MENU}
2{V}/{^}: “New entry” i{OK}
3Enter the name (max. 16 characters). i{OK}
4Enter the phone number (max. 24 digits). i{OK}
5{V}/{^}: “Save” i{OK}i{OFF}
For further information, visit http://www.panasonic.com/help or refer to Operating
Instructions.
{V}
{^}
{<}{>}
TG103xQG(e).fm2ページ２００７年１月１８日 木曜日 午後４時２８分

– 3 –
Basic operation (Handset)
Feature Operation
Adjusting the receiver/speaker
volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial
list
{REDIAL}i{V}/{^}: Select the desired phone
number. i{C}
Viewing the caller list and
calling back
{MENU}i{V}/{^}: “View Caller ID” i{OK}
iPress {V} or {^} repeatedly to select the desired
item. i{C}
Ringer volume 1{MENU}
2{V}/{^}: “Handset settings” i{OK}
3{V}/{^}: “Ringer settings” i{OK}
4{V}/{^}: “Ringer volume” i{OK}
5{^}/{V}: Select the desired volume. i { OK } i { OFF }
Answering call-waiting call
(2nd call)
Press {CALL WAIT}when you hear call waiting tone.
Answering system
Feature Operation
Auto answer on/off Press {ANSWER ON}on the base unit.
Recording your greeting
message
(max. 2 minutes and 30
seconds)
1Press {MENU}on the handset.
2{V}/{^}: “Answering device” i{OK}
3{V}/{^}: “Record greeting” i{OK}
4Speak clearly about 20 cm (8 inches) away from
the microphone.
5To stop recording, press {OK}.
6{OFF}
Listening to new messages When the MESSAGE indicator flashes on the base
unit, press {MESSAGE}.
Listening to old messages When the MESSAGE indicator does not flash on the
base unit, press {MESSAGE}.
Erasing a message Press {ERASE}on the base unit during playback.
Using the answering system
remotely
1Dial your phone number from a touch tone phone.
2After the greeting message starts, enter your
remote code. (Default remote code is “111”.)
LThe unit announces the number of new
messages.
3Follow the voice guidance as necessary.
TG103xQG(e).fm3ページ２００７年１月１８日 木曜日 午後４時２８分

– 4 –
Frequently asked questions
Question Cause/solution
How can I increase handset
volume level?
LPress navigator key {^} repeatedly while talking.
Why is the conversation noisy
or cutting off?
LTry to relocate the base unit so that distance from
location to use the handset will be minimized.
LSend your unit to service, if your unit has same
problem when the handset is next to the base unit.
Can I add another accessory
handset to my base unit?
LYes, you can add up to 6 handsets (including the
handset(s) sold with your own base unit) to a single
base unit.
LTo purchase accessory handset (KX-TGA101),
please visit http://www.panasonic.com
or call 1-800-332-5368. TTY users (hearing or
speech impaired users) can call 1-866-605-1277.
Can I keep battery charging all
the time?
LYou can leave handset on the base unit or charger
anytime. There is no damage to the battery.
How can I answer a call-
waiting call (2nd call)?
LPress {CALL WAIT}when you hear call-waiting
tone.
For further troubleshooting information, visit http://www.panasonic.com/help or
refer to Operating Instructions.
TG103xQG(e).fm4ページ２００７年１月１８日 木曜日 午後４時２８分

– 5 –
Quick troubleshooting
Place the handset on the base unit, then
check if “Charging” is displayed.
“Charging” is not displayed. “Charging” is
displayed.
Unplug and then plug AC
adaptor properly to both the
base unit and AC outlet.
Unplug the AC adaptor of the base unit and remove the
batteries from the handset, then plug in the AC adaptor and
insert the batteries into the handset again. Try re-registration
as explained later in this guide.
Lift the handset, then try again.
If handset still shows the same
message, try re-registration as
explained later in this guide.
“Charging” is still not
displayed.
Re-registration failed.
Re-registration failed.
“Charging” is
displayed, now.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
“No link to base. Move closer to base, try again.”
1Handset shows:
TG103xQG(e).fm5ページ２００７年１月１８日 木曜日 午後４時２８分

– 6 –
Quick troubleshooting
Lift up the handset from the base unit or
charger.
Press {C} (TALK) at the handset, then
check if the display shows “Talk”.
Press {s} (SP-PHONE),
then check if the dial tone
is heard from the speaker
on the back.
No dial tone
Dial tone is
heard.
{C}
{s}
“No link to base.
Move closer to
base, try again.” is
displayed.
“Talk” is
displayed.
Try remedy for
1on previous
page.
Check the telephone
cord is properly
connected to both the
base unit and
telephone line jack on
the wall.
Your telephone
may need service
when only back
speaker provides
a dial tone.
2No dial tone is heard from handset.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
Still no dial tone
5
No link to base.
Move closer to
base, try again.
5
Talk
w
TG103xQG(e).fm6ページ２００７年１月１８日 木曜日 午後４時２８分

– 7 –
Registering a handset to base unit
The included handset and base unit are preregistered. If for some reason the handset
is not registered to the base unit, register the handset.
For further registration information, visit
http://www.panasonic.com/RegisterYourHandset
Handset
Handset
Press {OK}, then wait until a beep
sounds and wstops flashing.
Base unit
Press and hold {LOCATOR}until the
registration tone sounds.
LComplete next step within 1 minute
and 30 seconds.
.1%#614
{MENU}{OK}
{OK}
5
Press LOCATOR
on base for 4sec
Then press OK
0 w 4
5
Press LOCATOR
on base for 4sec
Then press OK
0 w 4
1{MENU}
2{V}/{^}: “Handset settings” i
{OK}
3{V}/{^}: “Registration” i{OK}
4{V}/{^}: “HS registration” i
{OK}
TG103xQG(e).fm7ページ２００７年１月１８日 木曜日 午後４時２８分

1Read this Quick Guide or Operating
Instructions
LIf you lost Operating Instructions, you can
download at
http://www.panasonic.com/help
2Visit our website:
http://www.panasonic.com/help
LFAQs and troubleshooting hints are available.
3Contact us via the web at:
http://www.panasonic.com/contactinfo
4Call us at:
1-800-211-PANA (1-800-211-7262)
LMonday - Friday 9:00am - 9:00pm (EST),
Saturday/Sunday 10:00am - 7:00pm (EST)
To order a replacement battery,
please call: 1-800-332-5368
Or visit:
http://www.panasonic.com/batterystore
IMPORTANT!
If your product is not
working properly. . .
TG103xQG(e).fm8ページ２００７年１月１８日 木曜日 午後４時２８分