Panasonic KX-TGA750C User manual

Thank you for purchasing a Panasonic product.
Please read this installation manual before using the unit and
save it for future reference.
For assistance, please call
1-800-561-5505 or visit us at
www.panasonic.ca
This unit is an additional handset compatible with the following
series of Panasonic Digital Cordless Phone:
KX-TG4011/KX-TG4031/KX-TG6511/KX-TG6521/
KX-TG6531/KX-TG6551/KX-TG7511/KX-TG7531/
KX-TG7571
You must register this handset with your base unit before it can
be used. This installation manual describes only the steps
needed to register and begin using the handset. Please read
the base unit’s operating instructions for further details.
Charge the batteries for about 7 hours before initial use.
Additional Digital Cordless Handset
Model No. KX-TGA750C
Installation Manual
PNQX2421ZA DC0110DT0 (A)
Printed in China
TGA750C(e).fm Page 1 Monday, January 18, 2010 11:15 AM

2
Accessory information
Supplied accessories
*1 Please read the base unit’s operating instructions for replacement
battery information.
*2 The handset cover comes attached to the handset.
Note:
LPlease read the base unit’s operating instructions for additional/
replacement accessories.
– Optional headsets: RP-TCA94, RP-TCA95, KX-TCA400,
KX-TCA430
LThe suffix (C) in the following model numbers will be omitted in these
instructions: KX-TG4011C/KX-TG4031C/KX-TG6511C/KX-TG6521C/
KX-TG6531C/KX-TG6551C/KX-TG7511C/KX-TG7531C/
KX-TG7571C series.
Accessory item/Part number Quantity
Charger 1
AC adaptor/PQLV219 1
Rechargeable batteries*1/
HHR-55AAABU or N4DHYYY00004
2
Handset cover*2 1
Belt clip 1
TGA750C(e).fm Page 2 Monday, January 18, 2010 11:15 AM

3
Setting up
Connections/Wall mounting
Note:
LUse only the supplied Panasonic AC adaptor PQLV219.
LThe AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
LMake sure that the wall is strong enough to support the weight of the
unit.
Battery installation/Battery charge
Important:
LUse the supplied rechargeable batteries. For replacement, we
recommend using the Panasonic rechargeable batteries noted in the
base unit’s operating instructions.
LWipe the battery ends (S, T) with a dry cloth.
LAvoid touching the battery ends (S, T) or the unit contacts.
LConfirm correct polarities (S, T).
LUSE ONLY Ni-MH batteries AAA (R03) size.
LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
Hooks
25.4 mm
(1 inch)
(120 V AC, 60 Hz)
Screws
(Not supplied)
TGA750C(e).fm Page 3 Monday, January 18, 2010 11:15 AM

4
Charge for about 7 hours.
LWhen the batteries are fully charged, the charge indicator goes off and
“Fully charged”is displayed.
Note:
LWhen the language selection is displayed after installing the batteries
for the first time, you can select your desired language.
{V} / {^} : Select the desired setting. i {SAVE}i{OFF}
LIf the batteries are fully charged, but the operating time seems to be
shorter, clean the battery ends (S, T) and the charge contacts with a
dry cloth and charge again.
Panasonic Ni-MH battery performance (supplied batteries)
Operation Operating time
In continuous use 13 hours max. (If Eco mode is on.)
Not in use (standby) 6 days max. (If Eco mode is on.)
Charge indicator
Confirm
“Charging”
is displayed.
Rechargeable
Ni-MH ONLY
TGA750C(e).fm Page 4 Monday, January 18, 2010 11:15 AM

5
Controls
NControl type
ASoft keys
The handset features 2 soft keys and the centre of the navigator
key. By pressing a soft key, or the centre of the navigator key, you
can select the feature shown directly above it on the display.
BNavigator key
–{^}, {V}, {<}, or {>}: Scroll through various lists and items.
– VOL. (Volume: {^} or {V}): Adjust the receiver or speaker
volume while talking.
–{<}CID (Call Display): View the caller list.
–{>}REDIAL: View the redial list.
ACharge indicator
Ringer indicator
Message indicator
BNonslip pad
LNonslip pad offers support
when you cradle the
handset between your
shoulder and ear.
CSpeaker
D{C} (TALK)
E{s} (SP-PHONE:
Speakerphone)
FHeadset jack
GDial keypad ({*}: TONE)
HReceiver
IDisplay
J{OFF}
K{FLASH}{CALL WAIT}
LMicrophone
MCharge contacts
B C
M
A
G
F
D
E
J
K
I
H
L
A
B
A
TGA750C(e).fm Page 5 Monday, January 18, 2010 11:15 AM

6
Note:
LThe preset melodies used for the ringer tone in this product are used
with permission of © 2007 Copyrights Vision Inc.
For KX-TG4011 series users
NUsing the soft keys (operational differences between handsets)
KX-TGA750C features 3 soft keys, different to your original handset
which features keys with printed function names.
Press the soft key corresponding to the desired operation
(page 5: A).
Example: When selecting/setting the desired item in programming
LSome KX-TGA750C soft key names are different to the button
names described in your base unit’s operating instructions.
Registering a handset to a base unit
1Base unit:
NKX-TG4011/KX-TG6511/KX-TG7511 series
Press and hold {LOCATOR}for about 5 seconds. (No registration
tone)
NKX-TG4031/KX-TG6521/KX-TG6531/KX-TG6551/KX-TG7531/
KX-TG7571 series
Press and hold {LOCATOR}for about 5 seconds until the
registration tone sounds.
LIf all registered handsets start ringing, press the same button to
stop. Then repeat this step.
2Handset:
Place the handset on the base unit or charger, then wait until a long
beep sounds and wis displayed.
Note:
LIf an error tone sounds, or if _is displayed, register the handset
according to the base unit’s operating instructions.
Original handset (printed key name) KX-TGA750C soft keys
{OK}{SELECT}{SAVE}
TGA750C(e).fm Page 6 Monday, January 18, 2010 11:15 AM

7
Display language
1{MENU}i{#}{1}{1}{0}
2{V}/{^}: Select the desired setting.
3{SAVE}i{OFF}
Date and time
1{MENU}i{#}{1}{0}{1}iEnter the current month, date, and
year by selecting 2 digits for each. i{OK}
Example: For July 15, 2010, enter {0}{7}{1}{5}{1}{0}.:
2Enter the current hour and minute (12-hour clock format) by selecting
2 digits for each.
Example: For 9:30, enter {0}{9}{3}{0}.
3{AM/PM}: Select “AM”or “PM”. i{SAVE}i{OFF}
Belt clip
NTo attach NTo remove
TGA750C(e).fm Page 7 Monday, January 18, 2010 11:15 AM

8
For KX-TG4031/KX-TG6511/KX-TG6521/
KX-TG6531/KX-TG6551 series users
There are some differences in the specification of your original handset
and the KX-TGA750C. The feature differences are described in the chart
below.
Main feature differences
*1 KX-TG4031/KX-TG6521/KX-TG6531/KX-TG6551 series only
Operational differences in other features
NChanging group names in the shared phonebook
See “Changing group names” (page 12).
NEditing entries in the shared phonebook
See “Editing entries” (page 12).
Feature KX-TGA750C KX-TG4031
series handset
KX-TG6511/
KX-TG6521/
KX-TG6531/
KX-TG6551
series handset
Display size 2.1 inches 1.8 inches 1.8 inches
Button size Large Extra large Large
Display mode
(page 9) r——
Message list
(page 9)
r*1 ——
TGA750C(e).fm Page 8 Monday, January 18, 2010 11:15 AM

9
Features only available for KX-TGA750C
Display mode
You can select to display either a single item or multiple items on one
screen at a time for the following features:
– handset main menu icons in function menu
– menu list, recorded message list, phonebook list, caller list, and redial
list
Select the desired setting:
–{MULTI}/“Multi items”: Multiple entries/all menu icons are shown
on one screen at a time.
–{SINGLE}/“Single item”: An entry/a menu icon is shown on one
screen in large characters at a time.
The default setting is “Multi items”.
NUsing soft key (Temporarily switching the display mode)
You can temporarily switch the display mode by pressing the right soft
key shown when viewing the lists or selecting menu icons.
NProgramming the display mode beforehand
1{MENU}i{#}{1}{9}{2}
2{V}/{^}: Select the desired setting. i{SAVE}i{OFF}
Note:
LWhen in multiple items display mode, you can move screens by
pressing {>}or {<}, without scrolling down or up through the list:
– Press {>}to go to the next screen.
– Press {<}to return to the previous screen.
LWhen in multiple items display mode, you can switch the screen to
confirm the detailed information by pressing {SINGLE}.
Differences in the answering system operations
(KX-TG4031/KX-TG6521/KX-TG6531/KX-TG6551
series only)
Message list: Listening to messages from the message list
You can select the item to play back.
TGA750C(e).fm Page 9 Monday, January 18, 2010 11:15 AM

10
1{MENU}i{#}{3}{2}{9}
2{V}/{^}: Select the desired item from the message list. i{PLAY}
LYou can erase the selected message as follows: {ERASE}i
{V}/{^}: “Yes”i{SELECT}
3When finished, press {OFF}.
Note:
LIf the item has already been heard, “Q”is displayed, even if it was
heard using another handset.
LIf the unit cannot receive caller information, “Message”is displayed in
the message list.
LWhen you play a message from the message list, the playback
operations are as shown below:
– If you press {1}or {<}, the currently playing message is played back
from the beginning.
– If you press {2}or {>}, the unit stops message playback and the
display goes back to the message list.
For KX-TG4011 series users
There are some differences in the specification of your original handset
and the KX-TGA750C. The feature differences are described in the
following chart.
Main feature differences
Feature KX-TGA750C KX-TG4011
series handset Page
Display size 2.1 inches 1.4 inches —
Phonebook settings
– Group
– All erase
r— 11, 13
Message alert r— 16, 17
Display mode r—9
Alarm r—14
TGA750C(e).fm Page 10 Monday, January 18, 2010 11:15 AM