Panasonic KX-TG200-B User manual

2.4GHz Cordless Phone
Model No. KX-TG200-B
KX-TG200-S
KX-TG205-B
Pulse-or-tone dialing capability
Operating Instructions
SPREAD SPECTRUM
TECHNOLOGY
UALÎI,
LBU. SYSTEM
KX-TG200-B
SST HOTLINE
1-800-211-PANA(7262)
PLEASE READ BEFORE USE AND SAVE.
. Charge the battery for about 15 hours before initial use.
uonesedard
uonesedo 21seg
UOHP49d0 padUenpy
UONBULOJU] {njasf

Before Initial Use
Please read IMPORTANT SAFETY
INSTRUCTIONS on pages 27-28 before use.
Read and understand all instructions.
Thank you for purchasing your new Panasonic cordless
telephone.
j Attach your purchase receipt here. l
For your future reference
Serial No. Date of purchase
(found on the bottom of the unit)
Name and address of dealer
Accessories To order accessories, call 1-800-332-5368.
D AC Adaptor (p. 8) O Telephone Line Cord (p. 8)
Order No. KX-A11-6 -
O Belt Clip (p. 13) l O Wall Mounting Adaptor (p. 23)
Order No. PQKE10073Z1 (KX-TG200-B) | Order No. PQKL24Z0
. PQKE10073Z2 (KX-TG200-S) i
PQKE10073Z3 (KX-TG205-B)
one l one

For Best Performance
Battery Charge
A rechargeable Nickel-Metal
Hydride (Ni-MH) battery powers
the handset. Charge the battery .
for about 15 hours before initial
use (p. 9).
is beneath
this cover.
Operating Distance/Noise
Calls are transmitted between the base unit and the handset using wireless
radio waves. For maximum distance and noise free operation, the
recommended base unit location is:
Away from electrical appliances In a HIGH and CENTRAL
such as a TV, personal computer, location with no obstructions
or another cordless phone. such as walls.
Raise the
antennas.
Note
While using the handset:
— If you are near a microwave oven which is being used, noise may be
heard at the receiver. Move away from the microwave oven and closer
to the base unit.
— If more than one cordless phone is being used and your handset is near
another cordless phone’s base unit, noise may be heard. Move away
from the other cordless phone’s base unit and closer to your base unit.

Contents
Location'of'Gontrols:..;....Luilla la 6
Senings:.. leche 8
GONNECUONS pillola ia 8
Battery: Chanme. eda elia E V 9
Selecting the Dialing Mode.................... rien 11
Selecting the Handset Ringer VOIUME............... 12
Selecting the Handset Ringer Tone (2 Types) ............... n 12
RISING AIG BOE. 13
Using the Optional Headset........... cc ccecscccesssseceeccecessssceeeceessnsssaseeeees 14
Connecting the Optional Headset to the Handset .............................. 14
How to Wear the Optional HeadSet... oreren 15
Basic Operation
Malina:Cdlls..... sudata 16
Answering Galls.........aoi ela a 17
Speed Dialer. LL LoL le Er 18
Storing Phone Numbers in Memory .............. i 18
Dialing a Stored Number... 19

Advanced Operation
Special Features lalla latina 20 I
One-Touch Dialer reale e enzo 20 È
Handset Locator ariani 21 Ey
For Call Waiting Service USErs ............. i 21 S
Automatic Security Code Setting ................... ii 21 à
Temporary Tone Dialing (For Rotary or Pulse Service Users) .......... 21
How to Use the PAUSE Button
(For Analog PBX Line/Long Distance Service Users) ........................ 21 ©
È
S
9
Battery Replacement ........................c cieca rire era cirie ricreca 22 y
S
Wall Mounting oo cscissssasicssicasaces denupes ssescgascvasscnaziveccsccesenceus ETNE AS Naas 23
Adding Another Phone .................... iii 24 BI
Before Requesting Help ........................ i 25 FE
Q
Important Safety Instructions 2.0.0.0... e 27 o
| © È
FCC and Other Information .................................... n 29 ES
O
3
bal“ LIONeUIOJU] jNJasn

Location of Controls
Ì Antenna
Handset
RECHARGE Indicator
(p. 9)
oY
TALK Indicator ata
(p. 11, 16) one V
RECARE
È
_- Headset Jack (p. 14)
| — (DIRECT) Button (p. 20)
l
|
| (AUTO) Button (p. 11, 18)
Button (p. 16)
FLASH | Button (p. 16, 21
(TONE)
Button
(p.
21)
utton
(p.
16,
21)
Button (p. 16)
PROGRAM
Button (p. 11, 18) Button (p. 16)
(PAUSE) Button (p. 21) [RINGER Button (p. 12)
(CH) (Channel) Button
(p. 16)
Charge Contacts (p. 10)

Base unit
uonjeiedaid
Antenna (p. 3, 8)
IN USE/CHARGE
indicator (p. 9)
Handset Hook (p. 23)
HANDSET LOCATOR
Button (p. 21)
Charge Contacts (p. 10)

Settings
Connections
Raise the antennas.
Fasten the AC adaptor cord to
prevent
it
from
being
disconnected.
Single-Line
Telephone Jack
(RJ11C)
Telephone Line Cord
Power Outlet
(AC 120 V, 60 Hz)
qu
e USE ONLY WITH Panasonic AC ADAPTOR KX-A11 or KX-A11-6.
e The AC adaptor must remain connected at all times. (It is normal for the
adaptor to feel warm during use.)
e To connect a standard telephone on the same line, see page 24.
AC Adaptor

Battery Charge
Place the handset on the base unit
and charge for about 15 hours
before initial use.
e The IN USE/CHARGE indicator lights.
IN USE/CHARGE
Indicator
Recharge
When the RECHARGE indicator flashes
or the unit beeps intermittently, recharge
the battery for about 15 hours.
e
if
you
DO
NOT
recharge
the
handset
RECHARGE
‘battery
for
more
than
30
minutes,
the
Indicator
RECHARGE
indicator
will
continue
to
flash.
uoneiedaid

10
= Settings
Battery information
If your Panasonic battery is fully charged:
*Within about 10 feet (3 m)
e Battery life may vary depending on usage conditions and ambient
temperature.
e Clean the handset and the base unit charge contacts with a soft dry
cloth once a month. Clean more often if the unit is subject to
grease, dust or high humidity. If not, the battery may not charge
properly.
e If the battery is fully charged, you do not have to place the handset on the
base unit until the RECHARGE indicator flashes. This will maximize the
battery life.
e The battery cannot be overcharged.

=
Selecting the Dialing Mode
You can program the dialing mode by using the handset near the base
unit. If you have touch tone service, set to TONE. If rotary or pulse service
is used, set to PULSE. Your phone comes from the factory set to TONE.
The TALK indicator light must be off before programming.
È
Ù
S
D)
ul
Ò
3
1 Press (PROGRAM).
e The TALK indicator flashes.
2 Press (AUTO).
TALK
Indicator
AUTO
3 To select PULSE, press [#] twice.
OR
To select TONE, press [*] twice.
4 When finished, press .
' ; PROGRAM)
e À confirmation tone sounds.* (PROGRAM)
e To cancel during programming, press (PROGRAM), then start from step 1.
e If 3 beeps sound during programming, a wrong key was pressed.
Restart from step 1.
*What the confirmation tone means
1 beep: The mode is different from the previously selected one.
2 beeps: The mode is the same as the previously selected one.
If a power failure occurs, the mode will return to the factory preset
(TONE). Reprogram if necessary.
11

12
mò Settings
Selecting the Handset Ringer Volume
The TALK indicator light must be off.
e To select HIGH (preset) or LOW, press briefly.
(Each time you press the button briefly, the selected volume will ring and
the ringer volume will change.)
e To turn the ringer OFF, press and hold until 2 beeps sound.
e To turn the ringer ON, press briefly. The ringer will sound at
the HIGH level.
Selecting the Handset Ringer Tone (2 Types)
The TALK indicator light must be off.
1 Press (RINGER].
Press (*) within 5 seconds.
e The selected ringer tone sounds.
e Each time you press within 5 seconds, the ringer tone will
change.

Using the Belt Clip
You can hang the handset on your
belt or pocket using the belt clip.
uonejedaid
To install the belt clip

14
= Settings
Using the Optional Headset
Plugging the optional headset into the handset provides a handsfree
phone conversation. Please use only the Panasonic KX-TCAS0 headset.
To order, call 1-800-332-5368.
Microphone
When the optional headset is connected to the handset, be sure to use
the headset to talk with the caller. If you want to have a normal cordless
phone conversation, disconnect the headset.
Connecting the Optional Headset to the
Handset
Open the headset jack cover, then connect the optional headset to the
headset jack as shown below.
Headset Jack

How to Wear the Optional Headset
1 Place the headset on your head .
and attach the clothing clip to
the desired position.
uonesedaig
2 Adjust the microphone to a
comfortable position.
e Place the microphone near
your mouth.
15

16
Making Calls
To have a handsfree conversation, connect the optional headset to the
handset and wear it (p. 14, 15).
1 Press [TALK].
e The TALK indicator
lights.
2 Dial a telephone
number.
e If you misdial, press
(FLASH) firmly then
dial again.
3 To hang up,
press or place
the handset on the
base unit.
e The TALK indicator
light goes out.
e If an alarm tone sounds in step 1, move closer to the base unit or place
the handset on the base unit. Then try again.
To redial the last number dialed
‘Press [TALK] » (REDIAL).
To select the receiver volume
Press (LOUD ] while talking.
e Each time you press the button, the volume level will change from
MEDIUM (preset) to HIGH to LOW.
If noise interferes with the conversation
Press to select a clearer channel or move closer to the base unit.

Answering Calls
To have a handsfree conversation, connect the optional headset to the
handset and wear it (p. 14, 15).
if the handset is off the base unit,
press (TALK).
e You can also answer a call by
‘ pressing any dialing button
(0) to (9), Mor m)
(— Any Key Talk).
OR
if on the base unit, just lift up.
O
w
O
O
v
©
Q)
a
O
33
1
Lighted handset keypad
The handset dialing buttons will light while dialing and flash when a call is
received. The lights will go out about 10 seconds after dialing or answering
a call.
When the optional headset is connected to the handset, be sure to use
the headset (p. 15) to taik with the caller. If you want to have a normal
cordless phone conversation, disconnect the headset.
17

18
Speed Dialer
Storing Phone Numbers in Memory
You can store up to 10 phone numbers in the handset. The dialing buttons
{{0) to (9)) function as memory stations.
The TALK indicator light must be off before programming.
1 Press [PROGRAM].
e The TALK indicator
flashes.
2 Enter a phone number up
to 16 digits.
e If you misdial, press
PROGRAM) to end
storing, then start from
TALK Indicator
step 1.
AUTO
3 Press [AUTO].
Memory Station —
Numbers
4 Press a memory station PROGRAM
number ((0) to (9)).
e A confirmation tone
sounds.*
e To store other numbers,
repeat steps 1 through 4.
e If a pause is required for dialing, can be stored in a phone
number counting as one digit (p. 21).
*What the confirmation tone means
1beep: The new number is stored.
2 beeps: The number is the same as the previously stored one.

To erase a stored number
Press > > the memory station number ((0) to (9) for
the phone number to be erased.
Dialing a Stored Number
1
2
Press | TALK].
Press | AUTO).
Press the memory station
number ([0) to (9)).
e The stored number is
dialed.
Memory Station
Numbers
0
D
o
©
O
GS
©
D
=
Q
3
19

20
Special Features
DIRECT
TALK j and
Indicator
TONE
PROGRAM
(PAUSE)
HANDSET LOCATOR
One-Touch Dialer
You can store a phone number in the button. The stored number
is dialed with a one-touch operation.
The TALK indicator light must be off before programming.
To store a phone number in memory
1. Press (PROGRAM).
e The TALK indicator flashes.
2. Enter a phone number up to 16 digits.
e If you misdial, press (PROGRAM), then start from step 1.
3. Press (DIRECT).
e A confirmation tone sounds: (See page 18.)
To dial a stored number
1. Press (TALK).
2. Press [DIRECT].
e The stored number is dialed.
eTo erase a stored number; Press [PROGRAM] » ( DIRECT).