Panasonic KX-TG2313AG User manual

2.4 GHz Digital Cordless Phone
Model No. KX-TG2313AG
Pulse-or-tone dialing capability
Operating Instructions
PLEASE READ BEFORE USE AND SAVE.
Caller ID Comptible
Charge the battery for 6 hours before initial use.
Contents:
Location of Controls . . . . . . . . . . . . . . . . . . . . 2
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Battery Installation/Battery Charge . . . . . . . . 5
Making/Answering Calls . . . . . . . . . . . . . . . . . 6
Caller ID Service . . . . . . . . . . . . . . . . . . . . . . 8
Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Safety Instructions . . . . . . . . . . . . . . . . . . . . . 9

– 2 –
NBase unit
Location of Controls
[HANDSET LOCATOR]
Button
Charge Contacts
Antenna
CHARGE Indicator
IN USE Indicator

– 3 –
NHandset
Antenna
Display
Receiver
Soft Keys
[OFF] Button
[MENU] Button
Navigator Key ([ d ],[ B ])
Back side
Speaker
Headset Jack
[C](TALK) Button
[s](Speakerphone) Button
[*](TONE) Button [FLASH/CALL WAIT]
Button
[REDIAL] Button
Charge Contacts
Microphone
[HOLD] Button
Ringer Indicator

– 4 –
•USE ONLY WITH Panasonic AC ADAPTOR PQLV1AG.
•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel
warm during use.)
•If your unit is connected to a PBX which does not support Caller ID, you cannot access
Caller ID services.
Connections
Fasten the AC adaptor cord.
To Single-Line Telephone Jack
Telephone Line Cord
To Power Outlet
(AC 220 V, 50 Hz)
AC Adaptor
Hooks

– 5 –
NBattery Installation
NBattery Charge
Place the handset on the base unit. Charge for 6 hours before initial use.
•The unit beeps once, the CHARGE indicator lights, and “Cargando” is displayed.
•When the battery is fully charged, “Carga completada” is displayed.
NRecharge
Recharge the battery when:
—“Recargar batería” is displayed on the handset,
— “7” flashes, or
— the handset beeps intermittently while it is in use.
• Clean the charge contacts of the handset and the base unit with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or high
humidity. Otherwise the battery may not charge properly.
•If the battery is fully charged, you do not have to place the handset on the base unit until
“Recargar batería” is displayed and/or “7” flashes. This will maximize the battery
life.
•If you want to keep the battery fully charged at all times, place the handset on the base
unit when the handset is not used. The battery cannot be overcharged.
Battery Installation/Battery Charge
1 Insert the battery in the handset.
2 Close the handset cover.
1
2
•Cuando abra la tapa de la bateria no deje la unidad portatil en la unidad base para
provenir una descarga eléctrica.

– 6 –
NTo make a call
To have a hands-free phone conversation
To dial after confirming the entered number
To redial the last number dialed, press [C]or [s], then press [REDIAL].
To adjust the receiver volume (3 levels) or speaker volume (6 levels) during
a conversation:
To increase volume, press [
B ]. To decrease volume, press [ d ].
Making/Answering Calls
1Press[C].
•“Conversar” is displayed.
2 Dial a phone number.
•The dialed number is displayed.
•After a few seconds, the display will show the length of the call.
3 To hang up, press [OFF] or place the handset on the base unit.
1Press[s].
•“Altavoz” is displayed.
2 Dial a phone number.
•The dialed number is displayed.
•After a few seconds, the display will show the length of the call.
3 When the other party answers, talk into the microphone.
4 To hang up, press [OFF] or place the handset on the base unit.
1 Enter a phone number.
•If you misdial, press Borrar. Enter the correct number.
•If a pause is required when dialing, press Pausa where needed.
•To cancel, press [OFF].
2Press[C]or [s].
3 To hang up, press [OFF] or place the handset on the base unit.

– 7 –
To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed are stored in the redial list.
To put a call on hold
To release the hold, press [C]or [s].
NTo answer a call
1Press[REDIAL].
•The last number dialed is displayed.
2 Scroll to the desired number by pressing [ d ]or [ B ].
•You can also scroll down through the list by pressing [REDIAL].
•To exit the list, press [OFF].
3Press[C]or [s].
• To erase an item, scroll to the item then press Borrar.
•If “Sin registros” is displayed, the list is empty.
Press [HOLD] during a conversation.
•“Retención” is displayed.
1Press[C]or [s].
•You can also answer a call by pressing any button except [ d ], [ B ]or [OFF].
2 To hang up, press [OFF] or place the handset on the base unit.

– 8 –
This unit is compatible with Caller ID services offered by your telephone
company. If you subscribe to Caller ID, caller’s information will be displayed and
recorded in the Caller List.
How Caller ID information is displayed
When a call comes in, the unit will ring and the caller information will be received.
Once the caller information is received, the handset display shows the caller’s
phone number after the ring.*
•After you answer the call, the display will show the length of the call.
*Private name display
If you receive a call from one of the phone numbers stored in the phone book,
the handset will show the caller’s name stored in the phone book.
•To use this function, names and phone numbers must be stored in the phone book.
The unit can record information up to 30 different callers and store this
information in the Caller List. Caller information is sorted by the most recent call
to the oldest. When the 31st call is received, the information from the 1st call is
deleted.
The handset can store up to 30 names and phone numbers in its phone book.
You can make a call by selecting a name or number from the phone book.
NChain Dial
You can dial a combination of phone book or manual key pad entries while
making a call. This feature can be used, for example, to first automatically dial a
calling card access number that you have stored in the phone book, then
manually or automatically dial your PIN and then automatically dial the
destination number from the phone book.
Caller ID Service
Phone Book

– 9 –
Take special care to follow the safety suggestions listed below.
Safety
1) The unit should be connected to a power supply only of the type described in
the operating instructions or as marked on the unit.
2) When left unused for a long period of time, the base unit should be unplugged
from the household AC outlet.
Installations
Environment
1) Do not use this unit near water—for example, near a bathtub, washbowl, sink,
etc. Damp basements should also be avoided.
2) The unit should be kept away from heat sources such as radiators, kitchen
range, etc. It also should not be placed in rooms where the temperature is less
than 5°C or greater than 40°C.
3) The AC adaptor is used as the main disconnect device, ensure that the AC
outlet is located/installed near the unit and is easily accessible.
Placement
1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are not
spilled into, the unit. Do not subject this unit to excessive smoke, dust,
mechanical vibration or shock.
3) Place the unit on a flat surface.
For best performance
1) If noise prevents the conversation from being understood at the handset,
approach the base unit to lessen the noise.
2) The handset should be used at the HIGH volume setting when the reception
tone is difficult to hear.
3) The handset should be fully recharged on the base unit when “Recargar
batería” is displayed and/or “7” flashes.
4) The handset antenna should not be touched during use because of its high
sensitivity.
5) The maximum calling distance may be shortened when the unit is used in the
following places: Near obstacles such as hills, tunnels, undergrounds, near
metal objects such as wire fences, etc.
Safety Instructions

Manufactured by Panasonic Communications de Mexico, S.A. de C.V. Tijuana
Mexico
Medical
Consult the manufacturer of any personal medical devices, such as pacemakers
or hearing aids, to determine if they are adequately shielded from external RF
(radio frequency) energy. (The unit operates in the frequency range of 2400 MHz
to 2481 MHz, and the power output level can range from 0.04 watts to 0.1 watts.)
Do not use the unit in health care facilities if any regulations posted in the area
instruct you not to do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF (radio frequency) energy.
Operating near 2.4 GHz electrical appliances may cause interference. Move
away from the electrical appliances.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR ANY TYPE OF MOISTURE.
If there is any trouble, disconnect the unit from the telephone line and connect a
known working phone. If the known working phone operates properly, do not
reconnect the unit to the telephone line until the trouble has been repaired. If the
known working phone does not operate properly, consult your telephone
company.
CONDICIONES DE OPERACION
La operación de este equipo esta condicionado a que los mismos no produzcan
interferencia perjudicial sobre otros sistemas radioeléctricos autorizados. Ademas no
habrá lugar a reclamo ante interferencias causadas sobre los sistemas en cuestion
por estaciones autorizadas.
PRIVACIDAD DE LAS COMUNICACIONES
Este equipo no esta garantizado contra la escucha ilegal.
•Tecnologia de Espectro Digital Ensanchado reduce la posibilidad deescuchas
ilegales para proteger su privacidad.