Panasonic KX-TG7120FX User manual

PQQW15234ZA DC0406DH0 FX-2/3
Digital Cordless Phone
Model No. KX-TG7100FX/KX-TG7102FX
Digital Cordless Answering System
Model No. KX-TG7120FX
To use this product in Czech or Slovakia, change the unit’s region setting to match your
country.
Refer to “Changing the unit’s region settings” in the operating instructions.
1Connections
Quick Guide
Base unit Charger (KX-TG7102 only)
(220–240 V,
50 Hz)
To telephone
network
Hook
Use only the included
AC adaptor and
telephone line cord.
Use only the included AC adaptor.
(220–240 V,
50 Hz)
Hooks
TG7100_7120FX(e-e)_QG.fm Page 1 Wednesday, March 29, 2006 7:41 PM

–2 –
2Battery installation/
Battery charge (Initial charge: 7 hours)
Note:
LUse only the included rechargeable batteries.
3Symbols used in these operating instructions
Changing the display language
16 display languages are available.
You can select “Deutsch”, “English”, “Magyar”, “Polski”, “slovensky”,
“ČeŠtina”, “Hrvatski”, “Slovenscina”, “Eesti”, “LIETUVIŠKAI”, “LatvieŠu”,
“Românã”, “БЪЛГАРСКИ”, “Srpski”, “МАКЕДОНСКИ”, or “Shqiptar”.
1{j/OK}
2Press {^} or {V} to select “Handset Setup”. i{>}
3Press {^} or {V} to select “Display Setup”. i{>}
4Press {^} or {V} to select “Select Language”. i{>}
5Press {^} or {V} to select the desired language. i{>}i{ih}
Symbol Meaning
{j/OK}Press {j/OK}.
iProceed to the next operation.
“” Select the words in quotations shown on the display (e.g., “Handset
Setup”) by pressing {^} or {V}.
*1 The pictured model is KX-TG7100.
Base unit *1 Charger *2
*2 KX-TG7102 only
Charge
contact
TG7100_7120FX(e-e)_QG.fm Page 2 Wednesday, March 29, 2006 7:41 PM

–3 –
Dialling mode (tone/pulse)
1{j/OK}
2Press {^} or {V} to select “Base Unit Setup”. i{>}
3Press {^} or {V} to select “Call Options”. i{>}
4Press {^} or {V} to select “Dial Mode”. i{>}
5Press {^} or {V} to select the desired setting. i{>}i{ih}
Date and time
1{j/OK}
2Press {^} or {V} to select “Handset Setup”. i{>}
3Press {^} or {V} to select “Time Settings”. i{>}iPress {^} or {V} to select “Set
Date & Time”. i{>}
4Enter the current day, month, and year.
5Enter the current hour and minute.
6{j/OK}i{ih}
4Basic operations
Feature Operation
Making a call Dial the phone number. i{C}/{s}
Answering a call {C}
Hanging up {ih}
Receiver/speaker volume Press {^} or {V} while on a call.
Last number redial {R} i{C}
Making a call with redial list {R} iPress {^} or {V} to select the desired number.
i{C}
Handset phonebook: storing
an entry (name and phone
numbers)
{k} i{j/OK}i“New Entry”i{>}iEnter
the party’s name (16 characters max.). i
{j/OK}iEnter the party’s phone number (24 digits
max.). i{j/OK}i“Save”i{>}i{ih}
LTo enter a name, see the character table in the
operating instructions.
Handset phonebook:
making a call
{k} iPress {^} or {V} to display the desired entry.
i{C}
Handset ringer volume {j/OK}i“Handset Setup”i{>}i“Ringer
Setup”i{>}i“Ringer Volume”i{>}i
Press {^} or {V} to select the desired volume. i{>}
i{ih}
TG7100_7120FX(e-e)_QG.fm Page 3 Wednesday, March 29, 2006 7:41 PM

–4 –
Answering system (KX-TG7120 only)
5Frequently asked questions
Changing ringtone
(outside calls)
{j/OK}i“Handset Setup”i{>}i“Ringer
Setup”i{>}i“Ext. Ringtone”i{>}i
Select the desired ringtone. i{>}i{ih}
Feature Operation
Answering on/off {j/OK}i“Answer System”i{>}i“Answer
On”or “Answer Off”i{>}i{ih}
Listening to messages {j/OK}i“Answer System”i{>}i“Play
New Msg.”or “Play All Msg.”i{>}
Question Cause & solution
What kind of power outlet
should I connect the AC
adaptor to?
Connect the AC adaptor to a 220–240 V outlet.
Why is wflashing? LThe handset is too far from the base unit. Move closer.
LThe AC adaptor is not connected. Check the
connections.
LYou are using the handset or base unit in an area with
high electrical interference. Place the handset and base
unit away from interference sources, such as antennas
and mobile phones.
LThe handset is not registered to the base unit. Register it.
{j/OK}i“Handset Setup”i{>}i
“Registration”i{>}i“Register H.set”i
{>}iPress and hold {x} on the base unit for about 3
seconds, until the registration tone sounds. iWait until
“Enter Base PIN”is displayed. iEnter the base unit
PIN (default: “0000”). i{j/OK}
Why can I not make calls? The dialling mode setting is incorrect. Set to “Tone”or
“Pulse”as needed.
Why is the handset display
blank?
The handset is not turned on. To turn the power on, press
{ih} for about 1 second.
What should I do when the
handset does not turn on?
LMake sure that the batteries are installed correctly.
LFully charge the batteries.
LClean the charge contacts and charge again.
How long should I charge new
batteries?
Charge the batteries for about 7 hours.
Feature Operation
TG7100_7120FX(e-e)_QG.fm Page 4 Wednesday, March 29, 2006 7:41 PM

–5 –
How long is the battery
operating time?
When you are using fully-charged Ni-MH batteries
(included batteries);
In continuous use: 17 hours max.
In continuous standby mode: 180 hours max.
LIt is normal for batteries not to reach full capacity at the
initial charge. Maximum battery performance is reached
after a few complete cycles of charge/discharge (use).
LActual battery performance depends on a combination of
how often the handset is in use and how often it is not in
use (standby).
Can I keep the handset on the
base unit or charger when I
am not using it?
LEven after the handset is fully charged, the handset can
be left on the base unit or charger without any ill effect on
the batteries.
When should I replace the
batteries?
If the batteries are fully charged until
1 is displayed, but
3 is displayed after a few calls, replace the batteries with
new ones.
What is a PIN? The PIN is a 4-digit number that must be entered in order
to change certain base unit settings. The default PIN is
“0000”.
What do I need to do to
display caller information?
LYou need to subscribe to Caller ID service. Consult your
service provider/telephone company for details.
LThe message “You must first subscribe to
Caller ID.” will be displayed until you receive caller
information after subscribing to Caller ID service.
Question Cause & solution
TG7100_7120FX(e-e)_QG.fm Page 5 Wednesday, March 29, 2006 7:41 PM

–6 –
6Optional service (Caller ID and SMS)
If you subscribe to Caller ID service, you can:
– display caller information
To use SMS, you must subscribe to Caller ID and/or appropriate service.
SMS (Short Message Service)
Tom
012345
TG7100_7120FX(e-e)_QG.fm Page 6 Wednesday, March 29, 2006 7:41 PM