Panasonic VE-GDX16DL User manual

Quick Reference Guide
Cordless Phone
Thank you for purchasing a Panasonic product.
●This guide explains some basic features and operations, but not all of them. For further details,
see the Japanese operating instructions.
●This product is designed for use in Japan.
Panasonic cannot provide service for this product if used outside Japan.
●Any details given in this guide are subject to change without notice.
Table of Contents
Parts Descriptions .....................................................................................................................2
Basic Operations .......................................................................................................................3
Base unit
(VE-GDX16/VE-GZX11)
Cordless handset 1
(KX-FKD510)
●Cordless handset 1 is an exclusive handset for the base unit.
●VE-GDX16DL/VE-GZX11DL includes one cordless handset 1, one cordless handset 2 and one
base unit.
●VE-GDX16D/VE-GZX11D includes one cordless handset 1 and one base unit.
Model No.
VE-GDX16DL VE-GDX16D
VE-GZX11DL VE-GZX11D
VE-GDX16DL/VE-GZX11DL VE-GDX16D/VE-GZX11D
Base unit
(VE-GDX16/VE-GZX11)
Cordless handset 1
(KX-FKD510)
Cordless handset 2
(KX-FKD508)

2
1Auto Answer button & indicator
2Stop button
Display selection button (To turn the
backlight on/To switch the display when
the backlight is on)
3Caller ID Log indicator
4Liquid crystal display
5Locator button
Base unit
Parts Descriptions
6
7
8
9
10
11
12
18
19
15
16
14
13
17
Cordless handset 1
Cordless handset 2
Backside View
20
21
21
20
Cordless handset 1/Cordless handset 2 6Earpiece
7Liquid crystal display
8Multi-operation/One-touch Dial buttons
9Hold/Intercom button
10
Caller ID button ( )
Redial button ( )
Volume control button ( )
11
Off button
12
Numeral/Character buttons
13
Speakerphone button
14
Microphone
15
Flash button
留守：Auto Answer button (Cordless
handset 1 only)
16
Tone button (to switch to tone dialing)
17
Function/Set button
18
Talk button
19
Phone book button
アラーム：Alarm button (Cordless
handset 1 only)
20
Speaker
21
Battery cover
1
2
34
Top view
5
• The illustration shown is cordless handset 1. Please refer to the
same numbers for cordless handset 2.

3
■To use TAM (Telephone Answering Machine)
When you leave home, press (
15
)
( ) or press ( 1) on the base unit
to turn on the indicator.
(To deactivate, press ( ) or
press on the base unit again to turn off the
indicator.)
When receiving a call while TAM is activated,
it answers the call automatically in Japanese,
and records the incoming messages. Then,
the auto answer indicator starts flashing and
“新しい用件が録音されました ” is displayed.
When you return home, press
( ) to play back the messages. The
answering mode is deactivated.
After playing back the messages, press
twice to erase the messages or press to
keep the messages.
To play back the messages while TAM is
deactivated, press ( )
(
10
) to select “ すべて再生 ”
（機能 /
決定）
(
17
).
After playing back the messages, press
twice to erase the messages or press to
keep the messages.
*Up to 50 messages can be recorded for approx.
12 minutes in total.
■To hear recorded messages while away from
home (Remote control)
Preparation before you leave home
Store a remote control number.
Press
（機能 /
決定）
.
Enter the desired 4-digit number. Press
（機能 /
決定）
, then press .
When you leave home, press
( ) or on the base unit.
Then auto answer indicator lights up.
To hear messages
Dial your home phone number. While the
outgoing message is played back, enter your
remote control number. Announcement.
Press 4. You will hear recorded messages if
any.
NOTE
●This operation can be made only from a
touch-tone phone.
●The number after the button shows the location
of the button described in the previous page.
Cordless handset 1
■To make a call
Lift the cordless handset 1 from the base unit
and press (
18
). Dial the phone number
(
12
). Talk. To end the call, place the
cordless handset 1 on the base unit or press
(
11
).
■To receive a call
When the phone rings, lift the cordless handset
1 from the base unit and press . Talk.
To end the call, place the cordless handset 1 on
the base unit or press .
■To make a call using the speakerphone
(Hands-free talk)
Lift the cordless handset 1 from the base unit
and press (
13
). Dial the phone number.
Talk to the microphone (
14
). To end the
call, place the cordless handset 1 on the base
unit or press .
●Speak clearly about 50 cm away from the
microphone.
●Speak alternately with the other party. The
sound may cut in and out if you both speak at
the same time.
■To receive a call with the speakerphone
(Hands-free talk)
When the phone rings, lift the cordless handset
1 from the base unit and press . Talk to
the microphone. To end the call, place the
cordless handset 1 on the base unit or press
.
■To place the current call on hold
Press ( 9) during a call with the cordless
handset 1.
(You can place the cordless handset 1 on the
base unit.)
■To retrieve the held call
Press .
■To transfer the held call to another cordless
handset
Press during a call. Press
- (Intercom No.). Press when
the other party answers.
Basic Operations

PNQP1371ZA TT0917TU0
When you return home, press
（機能 /
決定）
to select “留守電操作 ”
（機能 /
決定）
( ) to play back the messages.
The answering mode is deactivated.
After playing back the messages, press
twice to erase the messages or press to
keep the messages.
To play back the messages while TAM is
deactivated, press
（機能 /
決定）
to select
“留守電操作 ”
（機能 /
決定）
( )
to select “すべて再生 ”
（機能 /
決定）
.
After playing back the messages, press
twice to erase the messages or press to
keep the messages.
Cordless handset 2
(VE-GDX16DL/VE-GZX11DL only)
■To make a call
Lift the cordless handset 2 from the charger and
press . Dial the phone number.
Talk. To end the call, place the cordless
handset 2 on the charger or press .
■To receive a call
When the phone rings, lift the cordless handset 2
from the charger and press . Talk. To
end the call, place the cordless handset 2 on the
charger or press .
■To make a call using the speakerphone
(Hands-free talk)
Press . Dial the phone number. Talk
to the microphone. To end the call, place the
cordless handset 2 on the charger or press .
●Speak clearly about 50 cm away from the
microphone.
●Speak alternately with the other party. The
sound may cut in and out if you both speak at
the same time.
■To receive a call with the speakerphone
(Hands-free talk)
When the phone rings, press . Talk to
the microphone. To end the call, place the
cordless handset 2 on the charger or press .
■To place the current call on hold
Press during a call.
■To retrieve the held call
Press .
■To transfer the held call to another cordless
handset
Press during a call. Press
- (Intercom No.). Press when
the other party answers.
■To use TAM (Telephone Answering Machine)
When you leave home, press
（機能 /
決定）
to select “留守電操作 ”
（機能 /
決定）
( ).
(To deactivate, press
（機能 /
決定）
to
select “留守電操作 ”
（機能 /
決定）
( ).)
Panasonic Corporation 2017
C