Panasonic Diga DMR-ES20 User manual

RF
IN
VHF/UHF
RF IN
VIDEO
IN
VIDEO S-VIDEO
OUT
RF
IN
VIDEO
IN VHF/UHF
RF IN
1
3
4
2
43
1
2
RF
IN
1
2
3
4
A
B
6
1
2
3
6
4
5
1
2
3
45
RF
IN
5
VHF/UHF
RF IN
VIDEO
OUT
RF
IN
RF
1
23
4
5
Set Up Guide
DMR-ES20
Connection
Cable from wall
or antenna signal
Television
RF OUT terminal (This unit)
The picture and sound signal from
this unit does not go through the RF
OUT terminal to the television.
Connect the OUT terminal on this
unit to the Audio/Video In terminals
on the television through the
Audio/Video cable.
This unit
If you do not use a cable TV box
If you use a cable TV box
Cable from wall
This unitCable TV box
If your television does not have
Audio/Video terminals, an RF
modulator is necessary (see
below).
Connect 75 Ωcoaxial cables.
Connect Audio/Video cable.
Connect the AC power supply
cord.
If your television does not have
Audio/Video terminals, an RF
modulator is necessary (see
below).
Connect 75 Ωcoaxial cables.
Connect Audio/Video cables.
indicates included
accessories.
indicates accessories
not included.
indicates included
accessories.
indicates accessories
not included.
If you want to transfer VHS tapes to DVD,
refer to page 7 of the operating instructions.
75 Ωcoaxial cable Audio/Video cable AC power supply cord
Connect the AC power supply
cord.
Cable from wall or antenna signal
This unit RF Modulator Television
Television
Splitter
AUDIO IN
R L
AUDIO
R L
AUDIO
R L
AUDIO IN
R L
(example only)
If your television does not have Audio/Video terminals, an RF Modulator is necessary
(not included)
All manuals and user guides at all-guides.com
all-guides.com

Turn on the television and
select the appropriate
video input to suit the
connections to this unit.
(Select input with your TV’s remote
control. The button could be labeled
“TV/Video”, “Input”, or something
similar.)
Finalize....
After recording, it is necessary to finalize (close) DVD-R, DVD-RW and +R in order to be able to play them on other DVD
players (It is not possible to finalize DVD-RAM).
Press [e, r] to select the
language and press [ENTER].
The unit then proceeds with
Auto Clock Setting. The time
is displayed when finished.
Press [ENTER] to start
Plug-in Auto Tuning.
Press [e,r] to select
“Other Functions” and
press [ENTER].
Press [ENTER].
If you mistakenly select a different language, press and
hold [2CH] and [1CH] on the main unit at the same time
for more than 5 seconds. The setting is reset. Press [^DVD
POWER] and select the language again.
Press [^DVD POWER].
DVD-R DVD-RW +R
While stopped
Press [FUNCTIONS].
•The FUNCTIONS window
 is displayed.
Press [e,r] to select
“DISC MANAGEMENT”
and press [ENTER].
Press [w,q]to select
“ Start ” and
press [ENTER].
A message appears when
finished.
Press [ENTER].
Finalizing is completed. You
can play this disc on other
equipment.
Note
After finalizing
•DVD-R +R
 The disc becomes play-only and you can no longer record or
 edit.
•DVD-RW (DVD-Video format)
 You can record and edit the disc after formatting although it
 becomes play-only after finalizing.
•When finalizing a high-speed recording compatible disc, it may take longer
than displayed on the confirmation screen (approximately four times).
•You cannot finalize DVD-R, DVD-RW (DVD-Video format) or +R
 recorded on other manufacturers’ equipment.
Press [w,q] to select
“ Yes ” and press [ENTER].
Set Up
Playback on another unit
Press [e,r] to select
“Finalize” and press
[ENTER].
Visit Panasonic’s homepage for more information
http://www.panasonic.com
Have you connected correctly?
Check this!
If you do not have a 75 Wcoaxial cable connected to
the RF IN of this unit, no channels will be found
during the initial setup. Please connect the
appropriate 75 Wcoaxial cable.
If Plug-in Auto Tuning fails, refer to page 11 of the
operating instructions.
Panasonic’s Consumer Call Center will be happy to assist you.
If further assistance is needed,
In the U.S.A.: Contact Panasonic’s Customer Call Center at
  1-800-211-PANA(7262)
In Canada: 1-800-561-5505
RQCA1399-2
H0605FJ2075
DVD POWER
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
RETURN SUB MENU
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
RETURN SUB MENU
English
Español
Français
Press ENTER
Pulse ENTER
Appuyer sur ENTER
Select Language
Seleccione el idioma
Sélection de Langue
Set Channels Automatically
Ch.
Set Channels Automatically
Proceeding . . .
1
FUNCTIONS Not finalized DVD
DVD-R
DVD
DVD-R
Playback
ENTER
DIRECT NAVIGATOR
Other Functions Return
FLEXIBLE RECORDING
Schedule SCHEDULE
VCR Plus+
SETUP
DISC MANAGEMENT
Finalize
Finalizing is necessary to enable playback
of the disc on compatible DVD players.
You will be unable to record on this disc
once it is finalized.
Are you sure you want to continue?
Cancel Start
DISC
MANAGEMENT
DVD-RDVD-R
Titles 11
Used
Free
0 : 22
5:38 (EP)
Top Menu
ENTER
Disc Name
Finalize
Playback will start with:
Finalize
Finalizing will take approximately
16 minutes.
Do you want to continue? (Required for
playback on compatible DVD players.)
No Yes
FUNCTIONS Not Finalized DVD
DVD-R
DVD
DVD-R
Playback
ENTER
DIRECT NAVIGATOR
Other Functions Return
FLEXIBLE RECORDING
Schedule SCHEDULE
VCR Plus+
SETUP
DISC MANAGEMENT
DISC
MANAGEMENT
DVD-RDVD-R
Titles 11
Used
Free
0 : 22
5:38 (EP)
Top Menu
ENTER
Disc Name
Finalize
Playback will start with:
Finalize
Finalizing will take approximately 16 minutes.
Do you want to continue? (Required for
playback on compatible DVD players.)
No Yes
All manuals and user guides at all-guides.com