Panasonic ER-GB40 User manual

© Panasonic Corporation 2012 Unauthorized copy-
ing and distribution is a violation of law.
Order NO.SD1207E40CE
Rechargeable Beard/Hair Trimmer
Model No. ER-GB40
Europe
CIS
TABLE OF CONTENTS
PAGE PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
4.1. Disassembly Instuctions --------------------------------- 4
4.2. Cautions in Assembly ------------------------------------ 5
5 Schematic Diagram ---------------------------------------------- 7
6 Exploded View and Replacement Parts List ------------ 8
6.1. Exploded View --------------------------------------------- 8
6.2. Replacement Parts List ---------------------------------- 9

ER-GB40
2
1Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°). In case of using high temperature soldering
iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).
2 Specifications
Power source for Europe and CIS AC 230V, 50Hz
for the United Kingdom AC 230-240V, 50Hz
Motor voltage 1.2 V
Charging time RE7-69 230V- Approx. 8 hours
RE7-74 for the United Kingdom 240V- Approx. 8 hours
230V- Approx. 10 hours
Weight 150g
Supplied accessories Comb attachment
Cleaning brush
Oil

ER-GB40
3
3 Troubleshooting Guide

ER-GB40
4
4 Disassembly and Assembly Instructions
4.1. Disassembly Instuctions
1. Remove the comb attachment.
2. Remove the blade.
3. Remove one screw.
4. Remove the bottom cover.
5. Remove two screws.
6. Remove the blade holder B and the spring for cutter.
7. Remove the blade holder A.
8. Remove the adjusting dial.
9. Remove the front panel.
10. Remove the seven screws.

ER-GB40
5
11. Remove the housing B.
12. Slide the chassis, and reversing the direction of the arrow.
13. Remove the battery o-ring and washer in battery. Take
out the rechargeable battery from the chassis.
4.2. Cautions in Assembly
NOTE:
When reassembling, replace the new waterproof rubber.
Make sure whether there is NO foreign substance sticking
around a part covered with water seal.
4.2.1. Motor
1. Place the red mark on upper side. Fit the shape of motor
balancer and the hole of housing A and insert into hous-
ing A.
4.2.2. Rechargeable battery
1. Insert the rechargeable battery into chassis. Attach the
battery o-ring and washer to the battery.
4.2.3. Side terminal
1. Insert the side terminals on both sides.

ER-GB40
6
4.2.4. Module chassis assembly
Confirm the correct wiring.
1. Place RED lead wire.
2. Move BLUE lead wires aside.
3. Place BLACK lead wire in right position.
Place module chassis assembly in the housing.
NOTE:
Press fit the lead wire neatly to avoid any pinching especially for the both side.
4.2.5. Screw
1. Tighten screws with 1.47+-4.9N cm to prevent the break-
age of housing or making a crevice in the housing.

ER-GB40
7
5 Schematic Diagram

ER-GB40
8
6 Exploded View and Replacement Parts List
6.1. Exploded View

ER-GB40
9
6.2. Replacement Parts List
Safety Ref.
No.
Part No. Part Name & Description Quan-
tity
Remarks
1 WER9606Y BLADE BLOCK 1
2 WES7025L9707 SCREW 2
3 WER504L0166 SPRING FOR CUTTER 2 (2PCS/PK)
4 WERGB40S3288 ADJUSTING DIAL 1 for SILVER MODEL
4 WERGB40A3288 ADJUSTING DIAL 1 for BLUE MODEL
5 WERGB40S1588 BLADE HOLDER A 1 for SILVER MODEL
5 WERGB40A1588 BLADE HOLDER A 1 for BLUE MODEL
6 WERGB40S1598 BLADE HOLDER B 1 for SILVER MODEL
6 WERGB40A1598 BLADE HOLDER B 1 for BLUE MODEL
7 WERGB40A3968 FRONT PANEL 1 for SILVER MODEL
7 WERGB40K3968 FRONT PANEL 1 for BLUE MODEL
8 WERGB40S3058 HOUSING A 1 for SILVER MODEL
8 WERGB40A3058 HOUSING A 1 for BLUE MODEL
9 WERGB40S3069 HOUSING B 1 for SILVER and EUROPE MODEL
9 WERGB40S3060 HOUSING B 1 for SILVER and UK MODEL
9 WERGB40S3061 HOUSING B 1 for SILVER and CIS MODEL
9 WERGB40A3068 HOUSING B 1 for BLUE and EUROPE MODEL
9 WERGB40A3069 HOUSING B 1 for BLUE and UK MODEL
9 WERGB40A3060 HOUSING B 1 for BLUE and CIS MODEL
10 WERGB40L0588 HOUSING O-RING 1
11 WERGB40L0458 CLICK BUTTON 1
12 WERGB40L0178 SPRING A 1
13 WERGB40L1008 MOTOR ASSEMBLY 1
14 WESSL41L2508 RECHARGEABLE BATTERY 1 Ni-MH TYPE
15 WESRW30L0977 WASHER & O-RING SET 1ST
16 WESSL41L2108 MODULE CHASSIS ASSEMBLY 1
17 WESSL41L2158 SIDE TERMINAL 1ST
18 WERGB40S3178 BOTTOM COVER 1 for SILVER MODEL
18 WERGB40A3178 BOTTOM COVER 1 for BLUE MODEL
19 WES8176L6056 TAPPING SCREW 9 K2-8
20 WER217L0967 O-RING B 2 (6PCS/PK)
21 WERGB40S3039 BODY BLOCK 1 for SILVER and EUROPE MODEL
21 WERGB40S3030 BODY BLOCK 1 for SILVER and UK MODEL
21 WERGB40S3031 BODY BLOCK 1 for SILVER and CIS MODEL
21 WERGB40A3038 BODY BLOCK 1 for BLUE and EUROPE MODEL
21 WERGB40A3039 BODY BLOCK 1 for BLUE and UK MODEL
21 WERGB40A3030 BODY BLOCK 1 for BLUE and CIS MODEL
22 WERGB40S7398 COMB ATTACHMENT (1mm (1/
32INCH) to 10mm (13/32INCH))
1 for SILVER MODEL
22 WERGB40A7398 COMB ATTACHMENT (1mm (1/
32INCH) to 10mm (13/32INCH))
1 for BLUE MODEL
23 WESSL41K7664 AC ADAPTOR 1 C-2 PLUG
23 WESSL41K7660 AC ADAPTOR 1 B-2 PLUG
23 WESSL41K7661 AC ADAPTOR 1 C-2 PLUG only for CIS MODEL
24 WERGB30H7048 CLEANING BRUSH 1
25 WERGC20X7918 OIL 1
- WERGB40S8009 INDIVIDUAL BOX 1 for SILVER and EUROPE MODEL
- WERGB40S8000 INDIVIDUAL BOX 1 for SILVER and UK MODEL
- WERGB40S8001 INDIVIDUAL BOX 1 for SILVER and CIS MODEL
- WERGB40A8008 INDIVIDUAL BOX 1 for BLUE and EUROPE MODEL
- WERGB40A8009 INDIVIDUAL BOX 1 for BLUE and UK MODEL
- WERGB40A8000 INDIVIDUAL BOX 1 for BLUE and CIS MODEL
- WERGB40S8109 OPERATING INSTRUCTIONS 1
- WERGB40S8100 OPERATING INSTRUCTIONS 1 only for CIS