Panasonic ES-RW30 User manual

How to use the shaver.
1. Press the OFF/ON switch.
oFor model ES-RW30, ES-RT51, depress the switch lock button, and slide the OFF/ON
switch upwards.
2. Hold the shaver as illustrated and shave.
Start out shaving by applying gentle pressure to your face. Stretch your skin with your free hand
and move the shaver back and forth in the direction of your beard. You may gently increase the
amount of pressure as your skin becomes accustomed to this shaver. Applying excessive
pressure does not provide a closer shave.
Pivot action selector (ES-8103, ES-8243)
Use to select “SOFT” (soft) or “LOCK” (lock). You can change the pivot action whether the shaver
is turned on or off.

For model ES-LT3N, ES-LT7N, ES-LT5N
The power cannot be turned on when the switch lock lamp blinks, as the power switch is
locked. Press the power switch for more than 2 seconds to unlock.
If you press the power switch for more than 2 seconds, the sonic vibration cleaning mode is
activated. You cannot shave in this mode.
Do not place your fingers on the power switch while using the shaver. This may cause the shaver
to lock the power switch or turn off. Place your fingers on the thumb rest while using the shaver.
The appliance may not operate in an ambient temperature approximately 5 °C (41 °F) or lower.
Depending on the beard thickness or the amount of beard trimmings in the shaver head, the
shaving sensor may not react and the driving sound may not change. This is not abnormal.
The shaving sensor may not respond depending on the type of the shaving gel and shaving
foam, but this is normal.
The shaving sensor may not respond when the remaining battery capacity is low. If this happens,
recharge the shaver.
Avoid the following situations to prevent damaging the system outer foil. Applying pressure to
any part of the system outer foil or bringing the system outer foil into contact with hard object
may cause damage on the system outer foil.
oShaving with only a part of the system outer foil.
oFinger or nail coming into contact with the system outer foil.
Switching the shaver head (ES-LT3N, ES-LT5N, ES-LT7N)
You can change the pivot action.
FREE: you can move the shaver head.
LOCK: you can lock the shaver head.
For model ES-LV67
The beard under the chin and around the throat can be shaved better by stretching the skin so
the beard will stand.
To prevent damaging the system outer foil, do not shave with only a part of the system outer
foil.
While using, the remaining battery capacity are shown and then turn off after 5 seconds.
Approximate amount of battery capacity is displayed as 20 - 100.
The shaving sensor lamp blinks.
After use, the remaining battery capacity blink and then turn off after 5 seconds.
When the battery capacity is low, "20" blinks when operating the shaver.

oYou can shave 2 to 3 times after “20” blinks. (This will differ depending on usage.)
The appliance may not operate in an ambient temperature lower than approximately 5 °C (41
°F).
The shaving sensor may not respond depending on the type and quantity of the shaving gel. This
is not abnormal.
Depending on the beard thickness or the amount of beard trimmings in the shaver head, the
shaving sensor may not react and the driving sound may not change. This is not abnormal.
To prevent erroneous operation, place your fingers on the thumb rest while using the shaver.
The sonic vibration cleaning mode is activated when the power switch is pressed for more than
2 seconds while the shaver is not operating. You cannot shave in this mode.
How to charge the shaver. - ES-8243
1. Insert the appliance plug into the shaver.
2. Plug in the adaptor into a household outlet.
oThe indicators on the LCD panel glow and charging starts.
oCharging is completed when the indicators on the LCD panel blink. (Max. 1 hour later)
oIf the shape of the plug does not fit the power outlet, use an attachment plug adaptor of
the proper configuration.
Reading the LCD panel
The LCD panel shows the remaining battery capacity from 0% to 100%, in 10% increments.
While charging, the indicators glow.
After charging is completed, the indicators blink once every second.
10 minutes after charging is completed, the indicators blink once every 2 seconds.
During use, the used time is shown. The shown time returns to [0'00"] after 10 minutes.
After use, the used time and the remaining battery capacity are shown alternately after turning
off the shaver.
When the battery capacity is low, you can shave 1 to 2 times after "10%" appears and
blinks. (This will differ depending on usage.)
A full charge will supply enough power for approx. 14 shaves of 3 minutes each.
How to replace the system outer foil and inner blades. - ES-8243
appears on the LCD panel once a year. (This will differ depending on usage.) We recommend

checking the system outer foil and in the inner blades when it appears. Press the OFF/ON switch for
more than 30 seconds to delete .
System outer foil
once every year
Inner blades
once every two years
1. Press the system outer foil release buttons and lift the system outer foil upwards as
illustrated.
2. Remove the inner blades one at a time as illustrated.
oDo not touch the edges (metal parts) of the inner blades to prevent injury to your hand.
3. Insert the inner blades one at a time until they click as illustrated.
4. Insert the system outer foil by pushing it downwards until it clicks.
How to clean the shaver.

We recommend that you clean your shaver with the self-cleaning recharger or the “sonic” vibration
turbo-cleaning mode when the faucet symbol appears on the LCD panel.
1. Disconnect the power cord from the shaver.
2. Apply some hand soap and some water to the outer foil.
3. Press the OFF/ON switch for more than 2 seconds to activate the turbo mode for “sonic”
vibration cleaning.
oFor models ES-8103, ES-8243, appears on the LCD panel.
oFor model ES-LT3N, ES-LT5N, the battery capacity lamps blink in order.
oAfter about 20 seconds, it will be automatically turned off, or you can turn it off by
pressing the OFF/ON switch.
4. Remove the outer foil section and press the OFF/ON switch for more than 2 seconds to
activate the turbo mode for “sonic” vibration cleaning and clean it with running water
oFor model ES-LT3N, this will activate the sonic vibration cleaning mode.
5. Wipe off any drops of water with a dry cloth.
6. Remove the outer foil section to allow it to dry completely
Caution for turbo mode (ES-8103, ES-8243)
Shaving in turbo mode may damage your skin. Turn the shaver off and then on again to cancel
turbo mode.
Do not place your fingers on the OFF/ON switch while using the shaver. This may cause the
shaver to turn off or enter turbo mode. Place your fingers on the finger rest while using the
shaver.

Troubleshooting - Shaver - The odor is getting stronger.
This is caused by shavings, oil from skin, and/or dirt that is stuck to the inner blades or system
outer foil. This can be improved by cleaning every time after shaving. Insufficient drying could
also cause a residual odor.