Panasonic SC-HTB20 User manual

VQC8931-1
Quick Start Guide
Home Theater Audio System SC-HTB20
Step 1: Choose in the configuration that is right for you
Place the speakers
horizontally Place the speakers vertically
To prevent damage or scratches, lay down a soft cloth
and perform the assembly on it. To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
2
4
13
Push
Insert the wire fully while
pushing the lever.
r: White
s: Blue line
2
2
1
1
Insert the wire fully
while pushing the
lever.
r: White
s: Blue line
Push
Pull the cable straight along
the line and slide into the
groove.
≥Be sure to place the cable under
the projecting part.
Front view Rear view
Push
≥Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect
with the speaker cable with a white connector on the observers’ left.
If you have any questions, contact: U.S.A. and Puerto Rico: 1-800-211-PANA (7262)
Mon-Fri: 9 ams9 pm (EST) Lunes-Viernes
Sat-Sun: 10 ams7 pm (EST) Sabado-Domingo
http://www.panasonic.com/help
Canada:
Telephone: [phone]
E-mail link: “Support # contact us # email” on www.panasonic.ca
SC-HTB20_PPC_ESG_VQC8931_eng.fm 5 ページ ２０１２年３月７日 水曜日 午後１時３１分

Turn on the active subwoofer.
Turn on the TV, and select this home theater system as the TV’s speakers from the
VIERA Link menu.
Press [iVOL j] on the TV’s remote control to adjust the volume.
§Operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
≥For details about VIERA Link (HDMI), refer to page 24 of the Owner’s Manual.
Turn on the active subwoofer and the TV.
Press [TV] to select the TV sound.
Press [iVOL j] to adjust the volume.
Step 2: Connect the cables
Do not connect the AC power supply cord to the active subwoofer until all
other connections are complete.
When the TV is HDMI (ARC) compatible
When the TV is non HDMI (ARC) compatible
HDMI IN
(ARC)
TV
Active subwoofer
HDMI cable
Be sure to connect to the TV’s ARC
compatible terminal. (Refer to the
TV’s Owner’s Manual.)
Red
White
To a household AC outlet
AC power
supply cord
HDMI (ARC)
Audio Return Channel:
Allows a home theater
system to receive and
play audio from the TV
through a HDMI cable
without additional wiring.
HDMI IN
OPTICAL
OUT
TV
Active subwoofer
HDMI cable
Optical digital
audio cable
Red
White
To a household AC outlet
AC power
supply cord
HDMI cable is required
for VIERA Link “HDAVI
Control”
Using this unit
When the TV is VIERA LinkTM “HDAVI ControlTM” or
HDMI CEC compatible
≥If the TV is not a Panasonic TV, set the “Receiver” or “External speakers” to “On”.
When the TV is not VIERA LinkTM “HDAVI ControlTM”
or HDMI CEC compatible
≥If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to
minimum.
For wall mounting and other details, be sure to refer to the Owner’s Manual.
e.g. TV remote control
e.g. TV remote control
SC-HTB20_PPC_ESG_VQC8931_eng.fm 6 ページ ２０１２年３月８日 木曜日 午後３時５分