Panasonic NI-WT980 User manual

Operating Instructions
Steam Iron
Model No.
N° de modèle
Modelo n.°
NI-WT980
English..........................................3
Français..................................... 23
Español...................................... 41
For assistance, please call: 1-800-211-PANA(7262)
or contact us at http://www.panasonic.com/contactinfo
or visit us at http://www.panasonic.com/repair
Please register via the Internet at: www.panasonic.com/register
(U.S.A/Puerto Rico)
For assistance, please visit us at http:// www.panasonic.ca/english/support
Pour obtenir de l’aide, visitez notre page Soutien http:// www.panasonic.ca/french/support
(Canada)
Mode d'emploi
Fer à vapeur
Instrucciones de uso
Plancha de vapor
Household Use Only
Pour utilisation domestique seulement
Uso doméstico únicamente

3
English
Operating Instructions
Steam Iron
Model No. NI-WT980
Thank you for purchasing this Panasonic product.
Before using this product, please read these instructions completely.
Pay particular attention to the "Important Safety Instructions" on
pages 4 and 5. Save these instructions for future use.
Contents
Household Use Only
Safety precautions.................................4
Parts identification ..............................9
How to fill the Water tank...................10
Using the steam iron..........................10
How to use the “Spray” feature.........13
How to use as a dry iron.....................14
How to care for and store your iron..14
Q&A.....................................................18
Trouble shooting................................19
Specifications.....................................19
CONFORMS TO UL STD. 60335-1 & 60335-2-3
CERTIFIED TO CSA STD. C22.2 NO.81

4
English
Safety precautions
To reduce the risk of injury, loss of life, electric shock, fire, and damage to
property, always observe the following safety precautions.
Explanation of symbols
The following symbols are used to classify and describe the level of hazard,
injury, and property damage caused when the denotation is disregarded and
improper use is performed.
WARNING Denotes a potential hazard that could result in
serious injury or death.
CAUTION Denotes a hazard that could result in minor injury
or property damage.
The following symbols are used to classify and describe the type of instructions
to be observed.
This symbol is used to alert users to a specific operating procedure that
must not be performed.
This symbol is used to alert users to a specific operating procedure that
must be followed in order to operate the unit safely.
IMPORTANT SAFETY INSTRUCTIONS
When using an iron, basic precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE USING
1. Only use an iron for its intended use.
2. To avoid the risk of electric shock, do not immerse the iron in
water or other liquids.
3. Always turn the iron OFF before plugging or unplugging the
iron from the electrical outlet.
Never pull on the cord to disconnect the iron from the electrical
outlet; instead, grasp the plug and pull on the plug to
disconnect the iron.
4. Do not let the cord touch hot surfaces. Let the iron cool
completely before putting the iron away. Coil the cord loosely
around the iron when storing.
5. Always disconnect the iron from the electrical outlet before
filling the iron with water, emptying the water from the iron, and
when the iron is not in use.

5
English
6. Do not operate the iron with a damaged cord or in the event the
iron has been dropped or damaged. To avoid the risk of electric
shock, do not disassemble the iron. Take it to a qualified
serviceman for examination and repair. Incorrect assembly
might result in a risk of electric shock when the iron is used
after reassembly.
7. Close supervision is required for any appliance used by or near
children. Do not leave the iron unattended while the iron is
connected or on an ironing board.
8. Burns can occur from touching hot metal parts, hot water, or
steam. Use caution when you turn a STEAM IRON upside
down – there might be hot water in the reservoir.
9. To avoid a circuit overload, do not operate an iron on the same
circuit with another high wattage appliance.
10.If an extension cord is absolutely necessary, a cord with an
ampere rating equal to or greater than the maximum rating of
the iron shall be used. A cord rated for less amperage can
result in a risk of fire or electric shock due to overheating. Care
shall be taken to arrange the cord so that it cannot be pulled or
be tripped over.
SAVE THESE INSTRUCTIONS

6
English
WARNING
To reduce the risk of personal injury, electric shock or fire, please observe the
following:
Do not leave the iron unattended while it is connected to the outlet .
Do not connect or disconnect the Power Plug to a household outlet
with wet hands.
Do not damage, modify, forcibly bend, pull, or twist the Power Cord.
Do not place anything heavy on or pinch the Power Cord.
Do not use with the Power Cord bundled.
Do not use the iron with wet hands.
Do not use in proximity of flammable materials (such as benzine or
the like).
Regularly clean the Power Plug to prevent dust from accumulating.
- Disconnect the Power Plug and wipe with a dry cloth.
Immediately stop using and unplug the Power Plug if there is an
abnormality or malfunction.
Examples of abnormalities:
· The iron stops occasionally, the Power Cord or the Power Plug is
abnormally hot or discolored.
· The iron is deformed or smells of burning.
- Refer servicing to authorized service personnel.
Always ensure the appliance is operated on an electric power source
matched to the rated voltage indicated on the iron .
Fully insert the Power Plug.
The Power Plug must be unplugged from the household outlet before
the Water Tank is filled with water.
Do not use when the Power Plug or Power Cord is damaged or hot.
Never use the
iron if the Power Plug fits loosely in a household outlet.
To reduce the risk of personal injury, electric shock or fire, please observe the
following:

This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the iron .
- Failure to do so may cause an accident or injury.
7
English
WARNING
The iron must be used and rested on a flat, stable surface. When
placing the iron on its stand, ensure that the surface on which the
stand is placed is stable.
- If placed on a shaggy rug or other unstable location, the iron may fall
over and cause damage to the rug, injury or burns.
If the Power Cord is damaged, it must be replaced by authorized
personnel.
- Failure to do so may cause an accident or injury.
The iron is not to be used if it has been dropped, if there are
visible signs of damage or if it is leaking.
- Refer servicing to authorized service personnel.
CAUTION
To reduce the risk of personal injury, property damage, electric shock or
fire, please observe the following:
Do not insert pins or needles in the iron or use it on clothes with
sewing needles or the like inserted.
Do not put the Soleplate too close to you or others since steam may
unexpectedly erupt from it.
Do not touch the steam or “Power Shot” during use.
•When using an ironing board which steam can penetrate, do not place
your hand, leg, etc. under the ironing board.
•Do not aim the steam at your hand, knee, or any other part of the body.
•Do not use steam or “Power Shot” when the iron is partially sticking
out from the ironing board.
•Do not iron clothes while being worn.

Do not store the Power Cord coiled with sharp angles.
- This may cause damage to the cord.
Only use tap water in the iron.
Do not add perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the Water Tank.
- Doing so may cause discoloration in the clothes.
8
English
CAUTION
Do not use the iron with the exception of fabric.
Do not store the iron until it has fully cooled down.
Do not operate the Power Shot Button repeatedly in quick successions.
- If repeating operation over an interval of less than 2 seconds, burns due to
hot water leaks may result.
If the shot intensity is low, do not operate the Power Shot Button.
- Doing so may cause burns due to hot water leaks.
Do not tilt or violently move the iron back and forth.
- Doing so may cause burns due to hot water leaks.
Do not use the iron while pointed towards you.
Use a dry iron on moist clothing (spray misted).
Care should be taken when using the iron.
- Steam emission may cause personal injury.
Test on an inconspicuous area when using with following fabric.
Or, place a cloth over the fabric to prevent shine marks on the fabric.
·
Expensive or specially processed fabrics (velvet, acrylic, nylon,
cashmere, etc.)
· Fabrics that are fragile to heat “low heat” or “medium heat” as indicated
on label, or dark colored fabrics.
Drain water from the Water Tank after use.
- Failure to do so may cause the water to leak out from the Soleplate when
the iron is next used.
To reduce the risk of personal injury, property damage, electric shock or
fire, please observe the following:

9
English
Parts identification
Thermostat Operating Indicator
Light
Handle
Spray Mist Trigger
Power Shot Button
Steam/Dry Selector
Water Fill Cover
Spray Nozzle
Soleplate
Maximum Water Level Indicator
Self-Cleaning Button
Power Switch [ / ]
Water Tank
Heel Rest
Power Cord
Power Plug
Accessory
Cup
ABCD
E
F
G
HIJ K L
O
P
M
N
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P

10
English
How to fill the Water tank
1
1Set the Steam/Dry Selector to the Dry
position to avoid water leakage.
2
2Open the Water Fill Cover, hold the
iron as shown and fill the Water Tank
with tap water up to “MAX” dot (about
350 mL (12.3 ounces)).
•Use the cup for filling.
3
3Check for the correct
water fill level with the
iron in the Heel rest
position.
4
4Close the Water Fill Cover.
Note
• Do not overfill the Water Tank. Steam will release through the vents when the
iron is positioned vertically.
• Be sure the Water Fill Cover is closed during use.
Using the steam iron
How to use as a steam iron
1
1Fill the Water Tank with tap water as described in “How to
fill the Water Tank”.
2
2Position the iron in the Heel rest position
and be sure the Power Switch is set to “ ”.
3
3Plug the Power Plug into a household outlet.
Before using the iron, check the fabric label.