Panasonic CYVM5800U - 5.8" CLR MONITOR/DVD User manual

Panasonic
5.8 Color LCD Monitor
Ecran couleur acristaux liquides de 5,8 pouces
Monitor LCD en color de 5,8"
CY-VM5800U
Operating Instructions
Manuel a"instructions
Manual de instrucciones
•Please read these instructions carefully before using this product and save this manual for future use.
•Priere de lire ces instructions attentivement avant d'utiliser le produit et garder ce manuel pour lutilisation ulterieure.
•Lea con atencion estas instrucciones antes de utilizar el producto yguarde este manual para poderlo consultar en el future

@
GO
©
0=
0
©
CO WARNING:
TO AVOID THE RISK OF SERIOUS INJURY OR
POSSIBLE VIOLATION OF LAWS, NOT FOR USE
WHERE VISIBLE TO DRIVER FOR ANY PURPOSE
OTHER THAN NAVIGATION OR USE WITH REAR
VIEW CAMERA.
When Driving
©The driver must not operate the color LCD
monitor. Operating the color LCD monitor may
lead to distraction and cause an accident. Stop
you car in asafe location when operating the
unit.
©The driver must not watch videos while driving,
it may lead to distraction and cause an acci-
dent.
•Keep the unit at an appropriate sound level.
Driving with the sound at alevel that prevents
you from hearing sounds outside and around
the car may cause an accident.
WARNING:
For safe driving, watching TV and video is
available only in stopped condition with the
parking brake pulled. "WARNING" will be dis-
played while the parking brake is not engaged.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, USE ONLY THE INCLUDED COMPO-
NENTS.
The user should bear in mind that in some
areas there may be restrictions on how and
where this unit must be installed. Consult your
dealer for further details.
CAUTION:
When Car Washing
Do not expose the product to water or excessive
moisture. This could cause electrical shorts, fire
or other damage.
WARNING:
oDue to the extreme danger of accidents
occurring, the driver must not watch the tele-
vision or videos while driving.
oDo not expose unit to direct sunlight or exces-
sive heat.
(Back of product)
(PSifl@S0[fi)5e MODEL NO.
N° DE MODELE CY-VM5800U
YFM014C240ZA
Ujiditttirrt ty MttKshili Electric (Ijitjj) Co., W
Tirpti Ttivn UlCt £1 Taiin.1
WARNING
Due to the extreme danger of accidents occurring, the driver
must not watch the television or videos while driving.
Do not expose unit to direct sunlight or excessive heat.

Consignes de securite Informacion para su seguridad
Avertissement
Pour Sviter tout risque de blessures graves et toute
infraction au code jundique, I'appareil ne doit pas
§tre utilise aun endroit ou fe conducteur puisse le
voir autrement que pour la navigation, mavec une
camera de Provision
Au volant
•Le conducteur ne doit |amais faire fonctionner ce
moniteur lorsqu'il conduit son v6hicule Le fait d'u-
tiliser le moniteur lorsqu'on est au volant r6duit con-
siderable ment la vigilance du conducteur et multiplie
les nsques d'accident Arreter le vehicule dans un
endroit sur pour manipuler le moniteur
•Le conducteur n'est pas autonse" aregarder une
bande vid6o en conduisant, car ceci peut entramer
une perte de vigilance et causer un accident
•Maintemr le moniteur aun niveau sonore approprie"
afin de ne pas masquer les sons ambiants et eviter
ainsi tout risque d'accident
PRECAUTION
Lavage de la voiture
Afin de prevenir tout risque de court-circuit ou d'm-
cendie, ne pas exposer requipement aI'eau ni aune
humidity excessive
AVERTISSEMENT
•Etant donne le risque eieve d'accident, le conduc-
teur ne doit pas regarder la television ou un video
lorsqu'il est volant
•Ne pas exposer I'appareil directement aux rayons
du soieil ou aune chaleur excessive
AVERTISSEMENT
Pour une conduite securttaire, le visionnement de la
television ou d'un video n'est possible que lorsque le
vehicule est immobilise avec le frein amam engage
"WARNING" (avertissement) s'affiche lorsque le
frein amam n'est pas engage
POUR REDUIRE LES RISQUES D'INCENDIE OU DE
CHOC ELECTRIQUE, N'UTILISER QUE LES COM-
POSANTS FOURNIS
L'utihsateur doit garder aI'espnt que, dans cer-
tames regions, il peut yavoir des restrictions quant
au lieu et ala facon d'mstaller cet appareil
Contactez votre detaillant pour plus de details
ADVERTENCIA
PARA EVITAR EL RIESGO DE SUFRIR HERIDAS
GRAVES 0INFRINGIR POSIBLEMENTE LAS LEYES,
EL APARATO NO DEBERA UTILIZARSE EN NINGUN
LUGAR DONDE EL CONDUCTOR PUEDA VERLO CON
OTRA FINALIDAD QUE NO SEA LA NAVEGACION 0EL
USO CON UNA CAMARA RETROVISORA
Al conducir
•El conductor no debe utilizar el monitor LCD en
color La utihzaci6n del monitor LCD en color puede
distraerlo ycausar un accidente Detenga su
vehiculo en un tugar seguro cuando mampule el
aparato
•El conductor no debe ver videos mientras conduce
Esto puede distraerlo ycausar un accidente
•Mantenga el aparato con un nivel de sonido apropia-
do Conducir con el sonido aun nivel que le impida
oir los sonidos del exterior yde alrededor del
vehiculo puede causar un accidente
PRECAUCION
At lavar el vehiculo
No exponga el producto al agua oauna humedad exce-
siva Esto puede causar descargas electncas, incen-
dios uotros danos
ADVERTENCIA
•Debido al gran riesgo de que se produzcan acci-
dentes, el conductor no debe ver la television ni
videos mientras conduce
•No exponga el aparato ala luz solar directs ni aun
calor excesivo
ADVERTENCIA
Para conducir con seguridad, la television ylos
videos s6lo pueden verse estando el vehiculo parado
ycon el freno de estacionamiento aplicado Si el
freno de estacionamiento no esta aplicado se visual-
ize la palabra "WARNING"
PARA REDUCIR EL RIESGO DE INCENDIOS 0
DESCARGAS ELECTRICAS, UTILICE SOLAMENTE LOS
COMPONENTES INCLUIDOS
El usuario debera* tener en cuenta que en algunas
zonas tal vez haya restncciones sobre cdmo yd6nde
puede ser instalado este aparato Consulte asu con-
cesionario para conocer ma's detailes

Panasonic welcomes you to our ever growing family of electronic product owners. We know that this prod-
uct will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical
engineering, and our products are manufactured with carefully selected components and assembled by
people who take pride in their work. Once you discover the quality, reliability, and value we have built into
this product, you too will be proud to be amember of our family,
v.J
nFeatures
oWide-screen 16:9 aspect ratio is ideal for film
viewing.
©280 800 pixels high-definition 5.8 inches large
LCD monitor.
oTFT (Thin Film Transistor) active matrix for accu-
rate color reproduction.
oCan be connected to the DVD player (CX-
DV700U), color LCD monitor/CD, DVD player (CY-
VMD9000U), video deck and other devices.
Components
oOperating instruction 1oSupplied hardware 1set (=> page 36)
oRemote control unit 1oWarranty card 1
oBattery (CR2025) 1
Contents
Safety Information 2
Use this Product Safety 5
Name of Controls
.
10
Remote Control Unit Preparation 11
Battery installation, battery notes, control reference guide
Before Using the Display Unit 12
Input Selection 13
Aspect Setting 14
Brightness Setting 15
Display Setting 16
Black level, contrast, color, tint
Installation Guide 18
Step-by-step procedures
Electrical Connections 21
Cautions, wiring diagram, basic system configuration, parking brake cord, advanced system configuration
Troubleshooting 24
Where to get service help, troubleshooting tips
Maintenance 26
To prevent damage to the system exterior, clean dirt by wiping lightly with asoft cloth
Specifications 27

Use this Product Safety
When Parked
•Parking in direct sunlight can produce very high
temperatures inside your car Give the interior a
chance to cool down before switching the unit on
•Do not watch the monitor with the engine off It
will consume battery power and may prevent the
engine from starting
Use the Proper Power Supply
•This product is designed to operate with a12 V,
negative ground battery system (the normal sys-
tem in aNorth American car)
Use Authorized Servicenters
•Do not attempt to disassemble or adjust this pre-
cision product Please refer to the Servicenter list
included with this product for service assistance
For Installation
•Where and how this unit is installed differs
according to the car model concerned As
such, the information contained in this installa-
tion guide is designed for professional
installers and is not intended for non-technical
individuals
•Be sure to install the monitor in aposition that
does not obstruct the driver's vision
•if the monitor has been installed for the rear
seat passengers, they must be careful to pre-
vent injury by hitting their heads on the monitor
in case of an accident
•Do not install the unit in an area where it would
obstruct the operation of an air bag
•Ask atrained technician to install the unit
Installation and wiring require training and
experience
To be safe, ask the sales outlet where you pur-
chased the unit to perform the installation
v>
Find the model number and serial number on
either the back or bottom of the unit Please
record them in the spaces below and retain this
booklet as apermanent record of your purchase
to help with identification in case of theft
MODEL NUMBER CY-VM5800U
SERIAL MUMBER
DATE PURCHASED
When Operating
oBe sure not to let the unit fall or be strongly
impacted since this may cause amalfunction or
fire
OCautions for the Liquid Crystal Panel
•Do not leave the liquid crystal panel surface facing
upwards
Storage temperature range -4°Fto 176°F
(-20 °C to 80 °C)
When the liquid crystal panel reaches high tem-
peratures or low temperatures, chemical changes
occur within the liquid crystal panel which may
cause malfunctions
•Do not strongly impact the liquid crystal panel
oWhen the temperature is very cold or very hot, the
image may not appear clearly or may move slow-
ly Also, movement of the image may seem to be
out of synchronization or the image quality may
decline in such environments Note that this is not
amalfunction or problem
Usage temperature range 32 °F to 104 °F
(0°Cto40°C)
•There may be red spots, blue spots and green
spots on the panel surface This is acharacteristic
of liquid crystal panels and is not aproblem The
liquid crystal panel is built with very high precision
technology and has at least 99 99% effective
image pixels Be aware that on 001 %of the panel
there may be missing pixels or constantly light
pixels
Spots
FROM
foYiV.M5800Uj 5

Panasonic est heureuse de vous compter parmi les utihsateurs de ses appareils eiectroniques Nous pouvons vous
assurer que cet appareil vous procurera de longues heures d'agrSment Notre reputation est fondGe sur une tng6niene
eiectronique et m&anique de haute precision, laquelle preside Ila fabrication d'appareils ne comportant que des com-
posants de choix assembles par un personnel soucieux de la bonne reputation acquise par la qualite de son travail
Apres avoir dScouvert la qualite, la valeur et la fiabilite de cet appareil, vous aussi serez tier d'etre un client Panasonic
VJ
nCaracteristiques
oLe rapport de format d'Scran large 16 9est ideal pour le
visionnement des films
oEcran acnstaux liquides de 5,8 pouces, ahaute defini-
tion de 280 800 pixels
oMatrice active TFT (transistor acouches minces) pour
une reproduction fidele des couleurs
oPeut etre raccorde" au lecteur DVD (CX-DV700U), au
lecteur CD, DVD/6cran couleur acnstaux liquides (CY-
VMD9000U), aune platine video et ad'autres appareils
Elements constitutifs
oManuel destructions
oTeiecommande
oPiles (CR2025)
oMateriel d'mstallation
oCarte de garantie
1ensemble {» page 36)
1
Table des matieres
Consignes de securite 3
Utiliser ce produit en respectant la securite 7
Noms de commandes 28
Preparation de la teiecommande 29
Mise en place de la pile, remarques sur la pile, guide de reference sur les commandes
Avant d'utiltser I'unite d'affichage 30
Selection de I'entree 31
Reglage du format 32
Reglage de la luminosite 33
Reglage de I'affichage 34
Niveau du noir, contraste, couleur, nuance
Guide d'installation 36
Procedure etape par etape
Branchements electriques 39
Attention, schema de cablage, configuration systeme de base, cable de connexion du frein de stationnement, configura-
tion systeme evoluee
En cas de difficulty 42
Ou obtenir le service apres-vente, conseils de depannage
Entretien 44
Pour eviter des d6g<its aI'exteneur de I'appareil, Nettoyer les souillures en frottant legerement avec un linge doux
Donnees techniques 45

Utiliser ce produit en respecfant I
Voiture stationnee
•L'habitacle d'une voiture immobile exposee au soleil
toutes vitres ferm6es devient rapidement tres chaud
Laisser rafraTchir hnteneur du v6hicule avant d'utiliser
I'appareil
•Ne pas regarder le moniteur lorsque le moteur est
arr§te Le fait de regarder le moniteur avec le contact
moteur coupe" consomme beaucoup de battene ce qui
pourrait empecher le moteur de repartir
Source d'ahmentation
•Cet appareil est congu pour fonctionner sur un systeme
d'ahmentation avec battene de 12 Vamasse negative
(systeme standard sur les voitures de construction
nordamericame)
Reparation des centres de service agrees (Servicenters)
•Ne pas tenter de dSmonter ou d'aiuster I'appareil soi-
mgme Veuillez consulter la liste des Centres de service
agrees (Servicenter) qui accompagne ce produit en
qualite de moyen d'assistance de service apres-vente
Installation
•L'endroit et la facon d'mstaller cet appareil different
selon le type de vehicule dont il s'agit Les informa-
tions de ce guide d'mstallation s'adressent en fait
aux instaltateurs qualifies, elles ne sont pas fournies
aI'mtention des individus sans qualifications tech-
niques
•Installer le moniteur video de telle maniere qu'il ne
gene pas la visibilite du conducteur
•Si le moniteur a6te installe pour les passagers
arnere, ceux-ct doivent faire tres attention de ne se
blesser ala tele en se cognant contre le moniteur en
cas d'accident
•Ne pas installer le moniteur aun emplacement qui
generait le deployment du sac gonflable
•Demander aun techmcien experiments d'mstaller le
moniteur
Pour plus de surete, demander au detaillant qui vous
afourni le moniteur de proceder ason installation
II est recommande de noter, dans I'espace prevu ci-
dessous, les numeros de module et de serie inscnts
soit aI'arnere soit sur le fond de I'appareil, et de con-
server ce manuel comme memorandum de I'achat afin
de permettre Identification de I'appareil en cas de vol
NUMERO DEMODELE CY-VM5800U
NUMERO DE SERIE
DATE DE L'ACHAT
VENDEUR
Pendant ('utilisation de I'appareil
oVeiller ane pas faire tomber I'appareil ni le heurter vio-
lemment etant donne que cela peut provoquer des
pannes voire un mcendie
Precautions aprendre avec le
panneau acristaux liquides
«Ne pas laisser la surface du panneau acristaux liquides
dmg6e vers lehaut
Limites de temperature de stockage -20 °C a80 °C
(-4°Fa176°F)
Lorsque le panneau acristaux liquides atteint des
temperatures elevees ou basses, des changements
chimiques se produisent dans le panneau acristaux
liquides meme qui peuvent eventuellement engendrer
des pannes
•Le panneau acristaux liquides ne doit jamais soumis a
des chocs violents
•Lorsque la temperature est particulierement basse ou
eievee, Timage sur I'ecran risque de ne pas Stre nette ou
encore une lente derive de hmage peut se produire Par
ailleurs, le mouvement de I'image risque d'apparaitre
comme etant en desynchronisation ou encore sa qualite
risque d'etre affectee dans de telles conditions II faut
cependant noter qu'il ne s'agit pas d'un defaut du
panneau ni d'une anomalie
Limites de temperature en service 0°C a40 °C
(32 °Fa104 °F)
©Des points rouges, bleus et verts peuvent apparaTtre sur
le panneau C'est une des caractenstiques du panneau a
cristaux liquides et ceci ne constitue pas une anomalie
Le panneau acristaux liquides aete realise apartir
d'une technologie de tres haute precision et possede au
minimum 99,99% de pixels d'image efficaces II con-
vient de savoir que dans 0,01% du panneau, des pixels
peuvent manquer ou bien §tre constamment allumes
Points
CO
©

Panasonic le da la bienvenida ala familia constantemente en aumento de poseedores de productos electrtinicos. Nos
esforzamos en proporcionarle las ventajas de la ingenierfa mecanica yelectrdnica de precision, de una fabricaci6n con
componentes cuidadosamente seleccionados, yde un montaje realizado por personas orgullosas de la reputation que
su trabajo ha cimentado para nuestra empresa. Estamos seguros de que este producto le proporcionara" muchas horas
de distracci6n y, una vez comprobada la calidad, el valor yla fiabilidad incorporados, used tambien se sentira" orgulloso
de pertenecer anuestra familia.
Caracteristicas
oPantalla panor^mica con una relaci6n de aspecto de
16:9 ideal para ver peliculas.
oAmplio monitor LCD de 5,8" con definici6n alta de
280 800 pixeles.
oMatriz activa TFT (transistor de pelicula fina) para
reproducirfielmente el color.
oSe puede conectar al reproducer DVD (CX-DV700U),
monitor LCD en color/reproductor CD, DVD (CY-
VMD9000U), platina de video yotros aparatos.
Componentes
oManual de instrucciones 1©Hardware suministrado 1juego (* pagina 54)
oMando adistancia 1oTarjeta de garantia 1
oPila (CR2025) 1
Indice
Information para su seguridad 3
Utilization segura de este producto 9
Nombre de los controles 46
Preparation del mando adistancia 47
Instalacion de la pila, notas sobre la pila, gufa de referencia de los controles
Antes de utilizar la unidad de visualization 48
Selection de entrada :49
Ajuste del aspecto .50
Ajuste del brillo 51
Ajuste de la visualization 52
Nivel del negro, contraste, color, matiz
Guia de instalacion 54
Procedimientos paso apaso
Conexiones electricas 57
Precauciones, diagrama de cableado, configuraci6n b£sica del sistema, cable del freno de estacionamiento, configuracion
de sistemas avanzados
Solution de problemas 60
Donde obtener la ayuda del servicio de reparaciones, consejos para solucionar problemas
Mantenimiento 62
Prevenci6n de danos en el exterior del sistema, limpieza pasando suavemente un pano blando
Especificaciones 63
8[CPJVI5800U1

Utilization segura de este producto
Durante el estacionamiento
•El estacionamiento bajo la luz solar directa puede pro-
ducir temperaturas muy altas en el interior del vehiculo
Permita que se enfne el interior del vehiculo antes de
encender el aparato
•No utilice el monitor con el motor apagado Esto con-
sume energia de la batena ypuede impedir el arranque
del motor
Utilization de la alimentacion apropiada
•Este producto ha sido disenado para funcionar con un
sistema de batena de 12 Vcon puesta amasa negativa
{el sistema normal en un vehiculo norteamericano)
Utilizacidn de los centros de servicio autorizados
•No intente desarmar ni ajustar este producto de alta
precision Consulte la lista de centros de servicio sum-
mistrada con este producto para solictor el servicio
necesano
Instalacion
•D6nde yc6mo se instala este aparato cambia de
acuerdo con el modelo de vehiculo pertinente Por lo
tanto, la informacidn contemda en esta guia de insta-
lacmn ha sido preparada para mstaladores profe-
sionales, no para personas que carezcan de los
debidos conocimientos tecnicos
•Asegurese de instalar el monitor en una posicion
que no obstruya la vision del conductor
•Si el monitor ha sido instalado para los pasajeros de
los asientos traseros, estos deben tener cuidado de
que sus cabezas no golpeen el monitor en caso de
producirse un accidente
•No instale el aparato en un lugar donde pueda
obstruir el funcionamiento de una bolsa de aire
•Pida aun ticnico cualificado que instale el aparato
La instalaci6n yel cableado requieren preparaci6n y
experience
Para su segundad, pida at comerciante aquien
adquinb el aparato que haga la instalaci6n
Encuentre el numero de modelo yel numero de sene
en la parte posterior oinferior de la unidad Antitelos en
el espacio de abajo yguarde este manual amodo de
prueba permanente de su compra, para que pueda uti-
lizarlo en el caso de que le roben la unidad
NUMERO DE MODELO CY-VM5800U
NUMERO DE SERIE
FECHA DEADQUISICION
VENDEUR
Durante el funcionamiento
•Asegurese de que el aparato no se caiga ni reciba
golpes fuertes porque esto puede causar un fun-
cionamiento defectuoso oun incendio
Cuidados para el panel de cnstal
li'quido
•No deje la superficie del panel de cnstal liquido mirando
hacia amba
Gama de temperaturas para guardar el aparato
-4 eFa176°F(-20 oCa80°C)
Cuando el panel de cnstal liquido alcanza temperaturas
altas obajas, se producen en 61 cambios quimicos que
pueden causar un funcionamiento defectuoso
•No golpee el panel de cnstal liquido
•Cuando la temperatura sea muy fna omuy caliente, la
imagen tal vez no aparezca claramente oquiza se mueva
lentamente Ademas, en tales ambientes, el movimiento
de la imagen puede parecer que no esta sincronizado o
la calidad de la misma puede reducirse Tenga en cuen-
ta que esto no es ningun funcionamiento defectuoso o
problema
Gama de temperaturas para utihzar el aparato
32 "Fa 104 °F (0 °Ca40 °C)
•En la superficie del panel puede haber puntos rojos,
azules yverdes Esto constituye una caractenstica de
los paneles de cnstal liquido yno supone ningun prob-
lema El panel de cnstal liquido se fabnca empleando
una tecnologia de alta precision, ydispone de un
99,99% de pixeles de imagen efectivos Tenga en cuen-
ta que en un 0,01% del panel podra" haber pixeles que
falten oque esten constantemente encendidos
Puntos
<i

Bright button (BRIGHT)
Used to adjust the screen brightness
(«=» page 15)
Picture button (PICTURE)
Menu button (MENU)
Used to select the VTR input selection.
(«=> page 13)
Used to adjust the display image
(=> page 16)
Aspect button (ASPECT)
Used to select and determine the
ASPECT, (o page 14)
Power button (POWER)
Used to turn the power ON and
OFF. (o page 12)
Remote sensor
Standby/power on indicator
[STAND BY (R)/0N (G)]
When the power is off: red
When the power is on: green
Terminal for —
connection cable
(on the leftside)
Select buttons (v, a)
Used to move the cursor.
(«* pages 13, 15, 16)
Enter button (ENTER)
Used to determine the
various settings.
(«=> pages 13, 16)
Screw holes are provided for attaching the height adjuster fitting
(on the bottom side).
[V-T (6 mm) unify screw, maximum length of 113/i 6"(4.5 mm)]
Note:
oThis unit does not contain any speakers.
CiYLVM5800U

Back side
Remote Control Unit Preparation
Battery Installation (Inserting/Replacing the Batteries)
HRemove the battery holder
Pull the holder by the position B while pushing position
Ain the direction indicated by the arrow
pInstall the battery on the battery holder
Set anew battery properly with its (+) side facing up as
shown in the figure
QInsert the battery holder
Push in the battery holder back into its original position
Battery Notes BaM,er
Remove and dispose of an old battery immediately
Battery Information
•Battery type Panasonic lithium battery (CR2025) (included)
•Battery life Approximately 6months with normal use (at room temperature)
Lithium battery
(included)
@
03
©
GV
0
©
00
8
Position B
IP'
Position A
Caution
•Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or afire
Battery leakage may damage the unit
•Do not disassemble or short the battery Do not throw abattery into afire
•Keep batteries away from children to avoid the risk of accidents
•Be careful to the local disposal rules when you dispose of batteries
Control Reference Guide
Point the remote control unit at the remote sensor
Power button (PWR)
{<* page 12)
Aspect button (ASPECT)
(«* page 14)
Bright button (BRIGHT)
(* page 15)
Picture button (PICTURE)
(=> page 16)
ii Panasonic «
VCar *;J
Menu button (MENU)
(=> page 13)
Select buttons (^, v)
(=* pages 13, 15, 16)
Enter button (ENTER)
(=> pages 13, 16)

fore Using the Display Unit
WARNING:
For safe driving, watching TV and video is available only in stopped condition with the
parking brake pulled. "WARNING" will be displayed while the parking brake is not
engaged.
.Press [POWER]
The STAND BY indicator fights is green
Press [POWER1 again to switch off the power
The STAND BY indicator lights is red

Input Selection
•Select "VIDEO" when amobile video deck, video camera or mobile DVD player is connected
•Select "NAVIGATION" when anavigation system is connected
<D Press and hold [MENU] for more than
2seconds
VTR INPUT SELECT
^Q[g)g@
NAVIGATION
("[["a") DOWN/UP (ENTER) SELECT
Default VIDEO
©Press [a] or [v] to select an item
(2) Press [ENTER! to set
VTR INPUT SELECT
VIDEO
QBdown/up [enter] select
Note
•If no operation is performed for 10 seconds, the
menu display automatically disappears
CwAV

@
CO
©
0
1CO
Aspect Settioui
[ASPECT]
ENTER
Press [ASPECT]
oEach time this button is pressed, the display size
changes as shown below
NORMAL FULL ZOOM JUST
{OuO-()-( )
Jq wqIHb^-^olInWnl by
NORMAL (Default)
oThe conventional display image has a4to 3ratio
of horizontal to vertical
oIn this case, ablank area remains on the right and
left sides of the display
FULL
oThe screen is extended horizontally as awhole to
the aspect ratio of 16 to 9
oThe extension ratio is the same at any point of the
screen
ZOOM
oThe screen is fully extended at the normal aspect
ratio of 4to 3
oThe top and bottom of the screen are slightly cut
JUST
oThe screen is extended horizontally to the aspect
ratio of 16 to 9
oThe extension ratio increases toward the right and
left ends of the screen
Note
oIn some cases, the picture looks different from the
original one due to your selection of aspect
Cautions
©This is to remind you that compression or extension of the screen using the aspect ratio (screen mode)
changing function of this product for commercial purpose or viewing/listening by the public could infringe
on the rights of the author protected by the copyright law
©If you expand anormal picture (4 to 3) by using "JUST", "ZOOM" or "FULL" aspect the full of the screen,
you might not see the periphery of the picture, or you might see deformed picture Therefore, use the
"NORMAL" mode to see the original picture as the author intended it

Brightness Setting @
CO
©
(k
0
©
CO
Press [BRIGHT].
BRIGHT
123El
Default: level 4
Press [^] or [v] to adjust brightness to
your preferred level.
BRIGHT
1H34
Darker Brighter
©If no operation is performed for 10 seconds, the
menu display automatically disappears.
[BRIGHT]
-
&Y&VM5800.U 15

Display Setting
®Press [PICTURE]
CONTRAST
COLOR
TINT
END
(VII a)DOWN/UP (ENTER) SELECT
©Press [a] or Iv] to select an item
©Press [ENTER] to set
BLACK LEVEL
COLOR
TINT
END
C^HnO DOWN/UP [ENTER] SELECT
Black Level
Default 0
Setting range -30 to +30
Contrast
Default 0
Setting range -30 to +30
Color
Default 0
Setting range -30 to +30
Tint
Default 0
Setting range -30 to +30
f—>
Select
BLACK LEVEL
Select
CONTRAST
Select
COLOR
Select
TINT

©Press [a] or [v] to adjust
(D Press [ENTER] to set
CONTRAST
+15iiiiiiiiiiiiiii|iiiiiii|iiiini
Notes
•To return to the regular mode, select "END" and
then press [ENTER]
•If no operation is performed for 10 seconds, the
menu display automatically disappears
Adjust the black level if black and white are
reversed or the screen appears too white because
of the angle of viewing
CONTRAST
+15 iiiiimiiiiiii|iiiiiu| t
direction +direction
Decrease the contrast Increase the contrast
between black and white between black and white
[ENTER]
[V, s\)
r
COLOR
+15 iiiiiiiii iiiii|iiiiim|iiiimi
-direction +direction
Lighten the depth of Deepen the depth of color
color on the display on the display
>
r
TINT
-direction +direction
Emphasize red in the Emphasize green in the
color image color image
[PICTURE]-
,PWR) (MENU
—[A, V]
ENTCR
[ENTER]
Vc"*vJ

A\ WARDING
The installation information is designed for experienced installers and is not intended
for non-technical individuals. It does not contain warnings or cautions of the potential
dangers involved in attempting to install this product.
Any attempt to install this product in amotor car by anyone other than aqualified
installer could cause damage to the electrical system and could result in serious per-
sonal injury or death.
Overview Installation Hardware
This product should be installed by aprofessional
(Please refer to the "WARNING" statement
above )
oIdentify and label the car wires
oConnect the car wires to the wires of the power
connector
oCheck the operation of the unit
No Item Diagram Q'ty
®Connection cord
(Length 3m)
1
Clamp connector 1
If you encounter problems, please consult your
nearest professional installer
.
Caution.
oThis unit operates with a 12 VDC negative
ground auto battery system only Do not
attempt to use it in any other system Doing
so could cause serious damage
Before you begin installation, look for the following
items which are packed with your unit
oWarranty Card Fill this out promptly
oPanasonic Servicenter List for Service Directory
Keep for future reference in case the unit needs
servicing
oInstallation Hardware Needed for monitor set-
ting
[Gffi£VM5800Ul

Before Installation
Warning
•Do not install the monitor in alocation which
obstructs driving, visibility or which is prohibited
by applicable laws and regulations
If the monitor is installed in alocation which
obstructs forward visibility or operation of the air
bag or other safety equipment or which interferes
with operation of the car, it may cause an acci-
dent
•Never use bolts or nuts from the car's safety
devices for installation
If bolts or nuts from the wheel, brakes or other
safety devices are used for installation of the mon-
itor, it may cause an accident
•Attach the wires correctly
If the wiring is not correctly performed, it may
cause afire or an accident In particular, be sure to
run and secure the lead wire so that it does not get
tangled with ascrew or the moving portion of a
seat rail
•Use with 12 VDC negative ground car
This unit is only for use with a12 VDC negative
ground car It cannot be used in large trucks or
diesel cars which are 24 VDC car If it is used in
the wrong type of car, it may cause afire or an
accident
Required Tools
You'll need the following
12 VDC test Electrical tape Slide-cut
bulb pliers
Identify All Leads
The first step in installation is to identify all the car
wires you'll use when hooking up your LCD monitor
As you identify each wire, we suggest that you label
it using masking tape and apermanent marker This
will help avoid confusion when making connections
later
Note.
•Do not connect the power connector until you
have made all connections If there are no plastic
caps on the hooking wires, insulate all exposed
leads with electrical tape until you are ready to use
them Identify the leads in the following order
Power Lead
If your car has aradio or is pre-wired for one
Cut the connector wires one at atime from the plug
(leaving the leads as long as possible) so that you
can work with individual leads
Turn on the ignition to the accessory position, and
ground one lead of the test bulb to the chassis
Touch the other lead of the test bulb to each of the
exposed wires from the radio connector plug Touch
one wire at atime until you find the outlet that caus-
es the test bulb to light
Now turn the ignition off and then on If the bulb also
turns off and on, that outlet is the car power lead
If your car is not wired for an audio unit
Go to the fuse block and find the fuse port for acces-
sory (ACC), or ignition (IGN)
/
Cautions.
•Use the specified fuse
Be sure to always use the specified fuse If a
fuse other than the specified fuse is used, it
may cause afire or an accident
•Do not damage the cord by pinching or
pulling it
Do not pull or damage the cord If the cord is
not treated properly, it will short out or be
severed and may cause afire or an accident

@
©
0
©
CO
Installi (continued)
Connect All Leads
Now that you have identified all the wires in the car,
you're ready to begin connecting them to the con-
troller unit wires. The connection diagram (o pages
21, 22) shows the proper connections and color
coding of the leads.
We strongly recommend that you test the unit
before making afinal installation.
You can set the unit on the floor and make tempo-
rary connections to test the unit. Use electrical tape
to cover all exposed wires.
Important:
oConnect the red power lead last, after you
have made and insulated all other connec-
tions.
Ground
Connect the black ground lead of the power connec-
tor to the metal car chassis.
Power
Connect the red power lead to the correct car radio
wire or to the appropriate fuse port on the fuse
block.
If the LCD monitor functions properly with all these
connections made, disconnect the wires and pro-
ceed to the final installation.
Final Installation
Lead Connections
Connect al! wires, making sure that each connection
is insulated and secure. Bundle all loose wires and
fasten them with tape so they won't fall down later.
Congratulations! After making afew final checks,
you are ready to enjoy your new auto LCD monitor.
Final Checks
1. Make sure that all wires are properly connected
and insulated.
2. Turn on the ignition to check the unit for proper
operation.
If you have difficulties, consult your nearest autho-
rized professional installer for assistance.
installation Example>
Warning
oWhere and how this unit is installed differs according to the car model concerned. As such, the informa-
tion contained in this installation guide is designed for professional installers and is not intended for non-
technical individuals.
20 &Y1VJVI5800U