Panasonic TY-36SF24M User manual

FPanasonic
Assembly
Instructions
TY-36SF24M
VIDEO STAND
Important
A study of the assembly instructions will not only save you
time but may prevent possible damage to your new stand.
Assistance may be required for some assembly procedures.
CAUTION: THIS STANDSHOULDBEUSEDWITH CASTERS.
IT IS ALSO DESIGNEDFORUSEWITH
PANASONICTELEVISIONRECEIVERS.
UL APPROVED MODELS: CT-36SF24V, CT-36XF54V
Your Pack Contains:
TOLLFREECUSTOMERASSISTANCELINE
1.800-900-MICA (6422)
Video Stand
Pin O
A
Hinge Metal Plate E
Screw _
4 pcs.
1 Bag
Screw #8 x 5/8" B
16 Pcs. THT2QOFB76B
Caster _ C
1 Bag
4 Pcs. TBL2QA5118
Glass Door _ F
TKC2Q25129 2 Pcs. TKG2Q59475-4
ToolRequired:
_hillips Screwdriver
@

STEP 1
STEP2
• Turn the TV stand back to
the upright position.
• Remove shelf shipping
protectors.
Important:
To prevent the shelf from falling out when
installing the casters, it is important to keep
the "shelf shipping prot,_=ctor'' intact before
turning the unit upside down.
• Lay the top of the stand on a soft surface
(carpet) to avoid any damage to the unit.
• Install casters (_) to pre-drilled
as shown, using screws (_).

STEP ell Glass Door Installation
(Left glass door installation shown)
'<_==TOUCH PLATE
®
3-1 •Apply hinge metal plates (_ to the glass door L-_'on the
same side of the glass as the touch plate as shown.
3-2 • Slide the glass door (_) into the top and bottom hinges.
3-3 • Tighten the screws to fit against the hinge metal plates O.
Repeat the same procedure for the right side glass door installation.
Note: The glass door can be levelled by loosening the hinge metal screws O-

4
Insert pins @ as shown.
Place television set on the
stand making sure the holes
on the bottom of the television
line up with the pins on the stand.
Replacement Parts
Glass Door
////j
TKG2Q59475-4
Door Hinge
IKC2Q25077-2
Screw with Washer
#6 x 5/8 in.
THT2Q3JB98B
RearCover
TKD2Q17391
HingeMetal Plate
Screw
TKC2Q25129
Screw#6 x 5/8 in.
THT2QO7B99B
Shelf
TKD2Q13387
i
Touch Plate
TKC2Q25071
Screw #6 x g/4in.
THT2QOKC128B
ShelfPin
TKC2Q25036
Pin
() _)
TKC2Q25094
Screw#8 x 518in.
THT2C!OFB76B
To maintain appearance we recommend the following:
For Painted Surfaces: Usea damp cloth for cleaning. Do not use any abrasive orchemical3ased cleaners.
Vinyl:
•Scuff Marks:
•Stains:
i
Caster 1_
TBL2QA5118
Magnetic Latch
TKK2A0804
'Screw#8 x 1-15/16 in'i
TKC2Q25069-1
For parts inquiries or for out of warranty purchases:
PANASONIC SERVICES COMPANY
20421 84th Avenue South, Kent, Washington 98032 • Tel.: [phone] •Fax: [phone] ,_1
,,,, _) 1997 Malsushita Electric Industrial Co.. Ltd. • All rights reserved. Unauthori, zed copying and distribution is a violation of law. J
m
TQB2036SF24M
When making a part(s) inquiry, please quote part number and description.
For improvement purposes, design and specifications are subject to char,ge without notice.
Vinyl does not need polishing and is remarkably resistant to ahnost any stain.
Most scratches and scuffs can be removed with fine steel wool and furniture wax.
A sponge, dipped in warm, soapy water and use.d to wipe lightly o,,er vinyl will remove most stains.